ARMYTEK C2 Pro Wizard Magnet USB LED Headlamp User Manual

ARMYTEK C2 Pro Wizard Magnet USB LED Headlamp

Product Information

Specifications

• Model: Wizard C2 Pro (white light), Wizard C2 Pro (warm light)
• Optics: TIR
• Brightness Stabilization Type: FULL (constant light)
• Light Output: 2500 lm, 2330 lm
• Peak Beam Intensity: 4260 cd, 4130 cd
• Beam Distance: 131 m, 129 m
• Modes, Light Output, and Runtimes: Detailed modes and runtimes provided
• Power Source: 1×18650 Li-Ion
• Time of Charging (18650 Li-Ion 3500 mAh Battery): 3 h 40 min
• Dimensions: Length – 112 mm, Body Diameter – 20.4 mm, Head Diameter – 33 mm
• Weight: Without Battery – 65 g, With Battery – 115 g
• Ingress Protection: IP68 (Depth up to 10 m for 5 h)

Product Usage Instructions

Initial Service

To Set/Replace Battery:

1. Before use, tighten the tailcap as far as it can go.
2. Unscrew the tailcap.
3. Place the battery with the positive contact (+) facing the head of the flashlight.
4. Adjust the tail cap and tighten it as far as it can go. The flashlight is ready for operation.

Operation

General Type Modes:

Modes: Firefly1, Firefly2, Main modes, Turbo mode (last used in Advanced, Turbo2 by default).

• In OFF state 1 click: To turn on the last used mode.
• Press and hold: To start cycling through Firefly modes.
  Release to select. Keeping the button pressed will start cycling through the Main modes.

How to Connect the Magnetic Charger

– Connect the magnetic charger to the flashlight to start charging.

Frequently Asked Questions (FAQ)

• Q: How do I change between different modes on the flashlight?
  A: To change modes, follow the instructions provided in the Operation section of the user manual. Press and hold to cycle through modes and release to select.

• Q: What is the waterproof rating of the flashlight?
  A: The flashlight has an Ingress Protection rating of IP68, allowing submersion up to 10 meters for 5 hours.

Thank you for choosing the products of Armytek. Please read this manual carefully before using the flashlight.

Specifications

1. Headlamp: simple one-hand operation, reliable headmount. Solid body without long wires, weak rubber connectors and unnecessary boxes. The flashlight is easily installed, removed and 180° rotatable in the mount. Quick-release silicone ring provides additional fixation
2. Every Day Carry light: compact design, convenient side button, special matt anti-abrasive finish without rough knurling. Durable nylon holster, robust removable steel clip and strong built-in tail magnet
3. Sports flashlight: body made from durable and lightweight aircraft-grade aluminium, improved shock resistance. New springs for better battery and driver protection, constant light without flickering. Multiple variants of installation, optional accessories for mounting on sporting gear
4. Pro Powerful electronics provides impressive light output and record runtimes. Constant brightness even at low ambient temperatures and not fully charged battery
5. Pro Multicolor temperature, battery level and state indication
6. Convenient wide beam of fully upgraded optical system, steel bezel and tempered glass with anti-reflective coating for protection of the TIR-lens
7. Innovative technology allows using any standard 18650 Li-Ion battery with 10A discharge current. Full protection against short circuit even in case of contact between magnetic connector and metal objects
8. Active real-time temperature control to prevent overheating above +58 °C
9. Total protection from water, dirt and dust in accordance with IP68 standard — flashlight continues to work even after submersion at 10 meters depth. Withstands fallings from up to 10 meters
10. Robust and water resistant magnetic connector

All the above specifications are test results based on ANSI/PLATO FL 1-2019 Standard. The data may vary due to environment, heat dissipation and other factors

Set description

Flashlight, 18650 Li-Ion 3500 mAh battery, magnetic USB charger, headmount, clip, nylon holster, 2 spare O-rings, user manual.
The producer reserves the right to change the package at his own discretion without modifying this manual. Specifications are subject to change without notice

Initial Service

TO SET/REPLACE BATTERY

1. Unscrew the tailcap.
2. Place the battery with the positive contact (+) facing the head of the flashlight.
3. Adjust the tailcap and tighten it as far as it can go.
   The flashlight is ready for operation.

HOW TO CONNECT THE MAGNETIC CHARGER

Unscrew the tailcap to 1/4 of a circle and adjust the magnetic charger to it.

CHARGER COLOR INDICATION

Charger not plugged in:

• Green — device is in waiting mode.

Charger plugged in:

• Green blinking — evaluation of battery voltage.
• Red blinking — unscrew the tailcap to 1/4 for charging.
• Orange blinking — USB power source voltage is too low for correct continuation of charging or bad contact between charger and battery. Clean the tailcap and the threads of the flashlight parts, use a different power source.
• Red—charging with rated charging current is going on.
• Orange — USB power source voltage is too low, charging current is reduced.
• Green — charging is finished

Operation

Before use : Tighten the tailcap as far as it can go.

GENERAL TYPE
Modes: Firefly1, Firefly2, Main modes, Turbo mode (last used in Advanced, Turbo2 by default).

In OFF state

1 click: To turn on the last used mode.
Press and hold: To start cycling through Firefly modes. Release to select. Keeping button pressed will start cycling through Main modes.

In ON state

1. 1 click: To turn off the flashlight.
   Press and hold: To start cycling through Main modes from any mode. In Firefly1 cycling through Main modes starts after cycling through Firefly modes. Release to select.

2. clicks: To turn on Turbo mode from any mode. The second double click brings back last used mode.

ADVANCED TYPE
To switch between types of operation unscrew the tailcap to 1/4 while the flashlight is off, press the button and tighten the tailcap while keeping the button pressed.

Sections of modes:

• [1] – Firefly modes
• [2] – Main modes
• [3] – Turbo modes,
• [4] – Strobe modes

In OFF state:

1 click: To turn on the last used mode.
Press and hold: To turn on Firefly1 mode [Section 1]. Keeping button pressed will start cycling through modes: Firefly1 – Firefly2 – Firefly3 – Main1 – Main2 – Main3 – Turbo1.

In ON state:

• 1 click: To turn off the flashlight.
  Press and hold: To start cycling through the modes of relevant Section.

The same in OFF & ON states:

• 2 clicks: To turn on Main mode [Section 2]. Another double click will switch between chosen modes in [Section 1] and [Section 2].
• 3 clicks: To turn on Turbo mode [Section 3].
• 4 clicks: To turn on Strobe mode [Section 4].

1. Automemorizing. After switching off the last used mode is memorized for quick access at next switching on.

2. Lock-out function. Unscrew the tailcap to 1/4 for protection from accidental switching on. Multicolor indication will be turned off.
   Safe high brightness modes. Turbo modes give maximum brightness until the temperature of the flashlight and discharge current of the battery exceed critical values.

3. Safe Soft-Start System allows increasing runtimes, getting longer battery life and protecting the battery from overdischarge or overheating.

4. Active real-time temperature control. When the temperature becomes close to +58 °C, the brightness decreases, which allows avoiding flashlight and battery overheating, as well as LED degradation.

5. Under good cooling conditions, the flashlight delivers light without stepping down.

BATTERY LEVEL AND FLASHLIGHT TEMPERATURE INDICATION

• The flashlight has a multicolor temperature, battery level and state indication (indication by the color LED in the button), as well as a low battery level indication by light (indication by the main LED of the flashlight). The flashlight indication in ON state includes a multicolor battery level and temperature indication, and low battery level indica-tion by light. When the flashlight is in OFF state, there is a multicolor state indication.
• Battery level is more than 25%. The color LED in the button flashes green once every 4 seconds.
• Low battery level. When the battery level becomes less than approx-imately 25%, the color LED in the button indicates the warning level by flashing orange 1 time every 2 seconds. With a further drop in voltage, the brightness begins to decrease in steps to ensure the safety of the battery and the user. If the brightness of the mode (except Firefly modes and Main1) drops below approximately 25% from the nominal value, the main LED flashes 2 times. When the battery level becomes critical, less than approximately 10%, the color LED flashes red 1 time every second.
• High temperature. When the temperature of the flashlight increases to the warning level, the color LED in the button flashes orange 3 times every 2 seconds. At critical level the LED flashes red 3 times every second. The brightness begins to decrease to a safe level.
• Multicolor state indication. Short flashes of the LED in the button every 4 seconds show the battery level when the flashlight is in OFF state (until the battery level becomes lower than the critical one). The indication also helps to find the flashlight in the dark.

Switching multicolor indication on/off. Multicolor indication has 3 operating modes:

1. The indication is switched off in Firefly modes (disabled after 10 sec-onds of operation) and in OFF state (by default).
2. The indication is switched on in any state.
3. The indication is switched off in any state.

To change the operating mode, unscrew the tailcap to 1/4 while the flashlight is off, press the button and keeping the button pressed, tight-en and unscrew the tailcap again. Operating modes of the indication will switch cyclically. The settings will be memorized even when the battery is changed. Ultra-low current consumption allows multicolor indication to work for a maximum period of time.

Warnings

• For effective operation of the flashlight, we recommend branded 18650 Li-Ion batteries no more than 70 mm long with at least 10A discharge current.
• The flashlight can get hot in Turbo modes, Strobe2 and Strobe3 quickly and discharge the battery with high current. Don’t leave it without your attention as very bright light might heat objects and cause fire.
• For storage or transportation of the flashlight in a pocket or a bag it is necessary to activate the lock-out function to ensure protec-tion from accidental switching on.
• It is forbidden to charge the battery inside the flashlight when the ambient temperature is below 0 °C.

1. Always follow the instructions from this manual and recommenda-tions on battery usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not modify or recast the flashlight and its components as it will deprive you of the warranty.
5. Do not allow water or any other liquid to leak into the flashlight.
6. Do not aim a switched-on flashlight at people’s or animals’ eyes — it can cause temporary blindness.
7. Do not allow children to use the flashlight without your assistance.

The producer will not be liable for any harm done to the user if it was caused by improper use of the product.

Care and Storage

It is recommended to clean the threads and O-rings off dirt and old grease once or twice per year. Remember that reliable protection from water and dust cannot be provided by worn-out sealing. The fouling as well as lack of grease cause fast wear-out of the threads and sealing rings.

To clean the threads do the following:

1. Unscrew the tailcap and remove the sealing rings carefully with a toothpick (do not use sharp metal objects as they can damage the rings).
2. Wipe the sealing rings thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged, replace it with a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid inside the flashlight, as it can cause malfunc-tioning of the flashlight.

After cleaning, grease the threads and the sealing rings that have been installed in place with polyalphaolefin-based silica grease, e.g. Nyogel 760G. The application of other types of grease is unacceptable. In case of active operation and exploitation in dusty environments, it is recommended to clean and grease the parts as often as the necessity arises.
WE DO NOT RECOMMEND leaving power supplies (especially non-rechargeable) inside the flashlight for a long storage period, as they can leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in, previously install new and high-quality batteries, store the flashlight in acceptable for batteries operational temperature and revise the batteries’ state at least once a month. If you have noticed any signs of defects, withdraw the batteries from the flashlight and dispose of them.

Warranty and Service

Armytek provides free warranty repairs for 10 years (excluding batteries, chargers, mounts, holders, switches and connectors, which have 2-year warranty) from the date of purchase if there is a document confirming the purchase.
The warranty does not apply to magnets, silicone covers of connectors and buttons, silicone installation rings and holders, clips, silicone grips, holsters, lanyards, O-rings and pads, Velcro tapes. The warranty also does not extend to damage during:

1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified specialists.
3. Application in chlorinated, contaminated liquids or sea water.
4. Immersion into liquids in case of broken leakproofness.
5. Exposure to high temperatures and chemicals, including the liquids from defected batteries.
6. Usage of low-quality batteries.

Armytek Worldwide / Representative in EU Germany, 10551 Berlin, Jonasstraße 6
+1 (206) 785-95-74, +49 (30) 3119-68-00 service@armytek.com www.armytek.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>