Armytek Wizard C2 WR Magnet USB User Manual
- June 3, 2024
- ARMYTEK
Table of Contents
Armytek Wizard C2 WR Magnet USB
OPERATION
Before use: Tighten the tailcap.
In OFF state:
1 click: To turn on the last used mode.
Press and hold: To turn on Firefly mode of the last used light. Keeping button
pressed will start cycling through modes of the chosen light. Release to
select.
In ON state:
1 click: Press and hold: To start cycling through modes of the chosen
light. Release to select. 2 clicks: To change between white and red light in
any mode.
Add/Remove Strobe modes.
press the button, tighten the tailcap while keeping the button pressed and
then unscrew it again.
WARNINGS
- For effective operation of the flashlight we recommend branded 18650 Li-Ion batteries without PCB (unprotected) no more than 70 mm long.
- The flashlight can get hot in Turbo and Strobe modes quickly and discharge the battery with high current. Don’t leave it without your attention as very bright light might heat objects and cause fire.
WARRANTY AND SERVICE
Armytek provides free warranty repairs for 10 years (excluding batteries,
chargers, switches and connectors, which have 2-year warranty) from the date
of purchase if there is a document confirming the purchase. The warranty does
not extend to damage during:
- Improper usage.
- Attempts to modify or repair the flashlight by nonqualified specialists.
- Long-term application in chlorinated and contaminated liquids or sea water.
- Exposure to high temperatures and chemicals (including the liquids from defected batteries).
- Usage of low-quality batteries.
Armytek Optoelectronics Inc.
Germany, 10551 Berlin, Jonasstraße 6
+1 206-785-9574 •
service@armytek.com •
www.armytek.com
Specifications are subject to change without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>