Bestway 43725 Boat Float Hydro Force Rapid Rider River Tube with Removable Shade Instructions

Bestway 43725 Boat Float Hydro Force Rapid Rider River Tube with

Removable Shade

Product Information

Specifications:

• Dimensions: 1.37 m x 1.37 m / 54 x 54
• Material: PVC
• Working Pressure: 0.03 bar
• Maximum Load Capacity: 100 kg

Product Usage Instructions

Assembly:

Adult assembly is required for this product. Follow these steps:

1. Take the product and accessories out with care.
2. Spread the product out.
3. WARNING: Poles contain fiberglass. We strongly recommend wearing gloves during assembly to avoid irritating hands.
4. Due to the high elasticity of the sunshade, open it carefully to avoid injury.

Inflation:

Follow these steps to inflate the product:

1. Open the safety valve.
2. Inflate with an air pump (not included) until the product reaches the design working pressure of 0.03 bar.
3. Fill the chambers until most of the wrinkles are gone and it feels firm to touch but NOT hard.
4. If you use a different air pump, ensure it does not exceed the recommended pressure.

Deflation and Dismantling:

To deflate and dismantle the product, follow these steps:

1. Dismantle the sunshade from the product.
2. Open and pinch the bottom of the valves to deflate.

Maintenance and Storage:

After use, follow these steps for maintenance and storage:

1. Use a damp cloth to gently clean all surfaces.
2. Avoid using abrasive cleaners or solvents that may damage the product.
3. Ensure the product is completely dry before storing.
4. Store the product in a cool, dry place away from direct sunlight.

FAQ

• Q: What is the maximum load capacity of the product?
  A: The maximum load capacity is 100 kg.

• Q: Can children below 14 years of age use this product?
  A: No, this product is not suitable for children below 14 years of age. It should only be applied to children above 14 years of age.

• Q: Can this product protect against drowning?
  A: No, this product does not protect against drowning. Always supervise children in water and ensure their safety.

• Q: Can swimmers other than adults use this product?
  A: No, this product is intended for swimmers only.

• Q: Are gloves recommended during assembly?
  A: Yes, gloves are strongly recommended during assembly to avoid irritating hands due to the fiberglass poles.

• Q: How should I clean the product after use?
  A: Use a damp cloth to gently clean all surfaces of the product.

WHAT IN BOX

INSTALLATION

WARNING

• WARNING
• B PROHIBITION
• C MANDATORY
  1. NO PROTECTION AGAINST DROWNING
  2. DESIGN WORKING PRESSURE: 0.03 BAR
  3. NOT FOR CHILDREN 14 YEARS OF AGE AND BELOW, APPLY ONLY TO CHILDREN ABOVE 14 YEARS OF AGE
  4. READ INSTRUCTIONS FIRST
  5. NUMBER OF USERS, 1 ADULT
  6. SWIMMERS ONLY
  7. MAXIMUM LOAD CAPACITY 100 KG
  8. FULLY INFLATE ALL AIR CHAMBERS
  9. ALWAYS SUPERVISE CHILDREN IN WATER
  10. POOL USE ONLY
  11. ALWAYS SUPERVISE REQUIRES BALANCINGERVISE CHILDREN IN WATER

WARNING

Non-compliance with these operating instructions may expose you to danger.

• ATTENTION! NO PROTECTION AGAINST DROWNING!
• SWIMMERS ONLY!
• Evenly distribute loads when using the product. Tipping and drowning may occur with uneven distribution of loads.
  SAVE THESE INSTRUCTIONS

TECHNICAL SAFETY INSTRUCTIONS

Read the manual and follow the instructions relating to safety tips, correct and complete product assembly, setting into service, use and maintenance.
For your own safety, always heed the advice and warnings in these instructions. Only use the product in the places and conditions for which it is intended.

• Full inflate all air chambers.
• Passenger numbers and load weight shall by no means exceed passenger number and maximum weight capacity in specifications.
• This product should not be used as a life-saving device.
• Life-saving devices (life jackets and life buoys) must be prepared together and inspected.
• Keep away from flames and fires.
• Before every use, carefully inspect all product components, to ensure everything is in good condition and tightly secured. Please stop to repair if you find any damage.
• Be careful when landing on the ground. Sharp and rough objects such as rocks, cement, shells, glass, etc. may puncture the product.
• Don’t leave the product exposed to sun for long periods, as high temperatures shall give rise to air expansion, which can cause irreparable damage.
• Never leave in or near the water when not in use.

ASSEMBLY

WARNING : Adult assembly is required.
Take the product and accessories out with care. Spread the product out.
WARNING : Poles contain fiberglass. We strongly recommend wearing gloves during assembly to avoid irritating hands.
Due to the high elasticity of the sunshade, open it carefully to avoid injury.

INFLATION

1. Open safety valve and inflate with the air pump (not included) to design working pressure on the product.

2. Fill the chambers until most of the wrinkles are gone and it feels firm to touch but NOT hard. If you use a pressure gauge (not included), the pressure should not exceed the specified pressure on the product or in the instructions. Do not over-inflate the product. Only use a low-pressure air pump. Do not use an air compressor.
   NOTE : Under and over-inflation of the product will result in safety hazards. It is better to check the pressure of the product each time before using.

3. Be sure to close the valves after inflation, press in the safety valves after inflation.
   NOTE : Never stand on or rest objects on the product during inflation.

DEFLATION AND DISMANTLING

1. Dismantle the sunshade from the product.
2. Open and pinch the bottom of the valves to deflate.

MAINTENANCE AND STORAGE

1. After use, use a damp cloth to gently clean all surfaces.
   NOTE : Never use solvents or other chemicals that may damage the product.

2. Store in a dry place, with a temperature higher than 15ºC/59ºF, out of reach of children.

©2023 Bestway Inflatables & Material Corp.
All rights reserved
Trademarks used in some countries under license from
Bestway Inflatables & Material Corp., Shanghai, China
Manufactured, distributed and represented in the European Union by Distributed in Latin America by
Bestway Central & South America Ltda, Salar Ascotan 1282, Parque Enea, Pudahuel, Santiago, Chile
Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia Tel: Australia: +61 2 9037 1388; New Zealand: 0800 142 101
Distributed in the United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL
Exported by
Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited
Suite 713, 7/Floor, East Wing, Tsim Sha Tsui Centre, 66 Mody Road, Kowloon, Hong Kong
www.bestwaycorp.com

References

• Home Page

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>