SHOW WAP-10 Series Waistband Amplifier User Manual
- June 1, 2024
- SHOW
Table of Contents
SHOW WAP-10 Series Waistband Amplifier
Specifications
- Model: WAP-10/10R
- AC Adaptor: Input: 100-240V~50/60Hz, Output: DC 12V 1A
- MP3 with USB/SD: Yes
- Record: Yes
- Phone Output(3.5mm Jack): No
- AUX IN(3.5mm Jack): Yes
- Built-in Speaker: Yes
- Frequency Response: 270-20k Hz/-10dB
- Power Output: 10W (Max)
- Output SPL: 89 dB(+/-3dB)
- Battery: 6xAA(UM-3) type batteries (excluded)
- Battery Life(Typical): Voice operation: Approx. 8.5 hours, Music Player operation: Approx. 6.5 hours
- Power Source: Alkaline battery (LR6): 6 (9V DC), Rechargeable nickel metal hydride (Ni-MH) battery (HR15/51): 6 (7.2V DC), Black manganese battery (R6PU): 6 (9V DC)
- Recharge Current: 300mA (Max)
- Audible Range: Voice operation: Approx. 70m (76.55 yd) depending on operating condition
- Microphone: Clip-on Microphone, Headset Microphone, Electret Condenser Microphone
- Belt Dimensions(WxHxD): 190x90x55mm(7.48×3.54×2.17)
- Weight: WAP-10: Approx 285g (0.63 lb), WAP-10R: Approx 325g (0.72 lb)
- Package: Main unit:1PCS, Clip-on microphone or headset microphone: 1PCS, AC Adaptor: 1PCS, Belt: 1PCS
Product Usage Instructions
Powering On/Off the Waistband Amplifier
To power on the amplifier, ensure the batteries are inserted correctly and press the power button. To power off, press and hold the power button until the device shuts down.
Connecting External Devices
You can connect external devices such as MP3 players or smartphones using the AUX IN (3.5mm Jack) port. Simply plug in the cable from your device to the amplifier.
Using Microphones
The waistband amplifier supports different types of microphones including clip-on, headset, and electret condenser microphones. Connect the microphone to the appropriate input jack on their device.
Adjusting Volume and Settings
You can adjust the volume and settings using the control buttons on the amplifier. Refer to the user manual for specific instructions on adjusting different settings.
FAQ
- Q: How long does the battery last on the waistband amplifier?
- A: The battery life varies depending on the operation. For voice operation, it lasts approximately 8.5 hours with alkaline batteries.
- Q: Can I use rechargeable batteries with the amplifier?
- A: Yes, you can use rechargeable nickel metal hydride (Ni-MH) batteries with the waistband amplifier.
- Q: What is the weight of the waistband amplifier?
- A: The WAP-10 model weighs approximately 285g (0.63 lb) excluding batteries, while the WAP-10R model weighs around 325g (0.72 lb) excluding batteries.
IMPORTANT!
Please read this manual carefully before operating this unit for the first time.
FUNCTIONS & INTRODUCTION
IMPORTANT SAFETY INSTRUCTION
The symbol is used to indicate that some hazardous live terminals are involved
within this apparatus, even under the normal operating conditions.
The symbol is used in the service documentation to indicate that specific
component shall be only replaced by the component specified in that
Documentation for safety rea sons.
The symbol for Class II, if applicable.
Alternating current /voltage.
DC only, with the symbol
Hazardous live terminal.
ON: Denotes the apparatus turns on.
OFF: Denotes the apparatus turns off, because of using the single pole switch, be sure to unplug the AC power to prevent any electric shock before you proceed your service.
Disposing of this product should not be placed in municipal waste and should be a separate collection.
WARNING: Describes precautions that should be observed to prevent the danger of injury or death to the user.
- Read this manual carefully before operation.
- Keep this manual in a safe place.
- Be aware of all warnings reported with this symbol.
- 4. Keep this Equipment away from moisture or heat.
- Clean it only with a dry cloth. Do not use solvents or other chemicals.
- Do not dampen or cover any cooling opening.
- Unplug this equipment and take out the battery when unused for long periods of time.
- Refer all service to qualified service personnel only. Do not perform any servicing other than those instructions contained within the User’s Manual.
- VERY IMPORTANT SAFETY NOTES:
- Permanent hearing loss may be caused by exposure to \ extremely high noise levels. The US. The government’s Occupational Safety and Health Administration (OSHA) has specified the permissible exposure to noise levels. These are shown in the following chart: Be sure to install batteries as the polarity indications inside of the battery container.
- The same type and standard battery can be used only. Never mix dry battery with rechargeable battery, never charge dry battery. Otherwise, these will cause some heavy damage, such as electric shock, explosion, fire etc.
- Please use only the matched adaptor as the power supply or adaptor for rechargeable battery charges. Before connecting the adaptor, please make sure that there is no dry battery inside of the unit to avoid any damage. Only a rechargeable battery can be charged.
- Do not short-circuit the adaptor, which may be sufficient to constitute the risk of malfunction, electric shock or fire.
HOURS X DAY SPL EXAMPLE
- 8 /90/ Small gig
- 6 /92/ train
- 4/ 95/ Subway train
- 3 /97/ High level desktop monitors
- 2 /100/ Classic music concert
- 1,5 /102
- 1 /105
- 0,5 /110
- 0,25 or less 115 Rock concert
According to OSHA, an exposure to high SPL in excess of these limits may result in the loss of heat. To avoid the potential damage of heat, it is recommended that Personnel exposed to equipment capable of generating high SPL use hearing protection while such equipment is under operation.
The mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
MIC AND BELT WEARING SKETCHES
NOTE: The microphones are optional (headset and clip-on).
h. REC
Press this key to record. On the opening or playing status press this key
once, it goes into the ready state, and you can press the “USB/ SD” key to
select the store equipment for the record. Press the “REC” again. After the
mark—-“REC” flickers about 3/4 times, it begins to record. After you finish
your record, press to stop this record. The record file will be automatically
stored in the “RECORD” folder in the selected store equipment. During the
process of recording, you can’t take other operations During the process of
recording, if the screen displays “ERR” it means the record goes wrong. Please
press the to stop the record.
NOTE: Basic interface instruction.
INTRODUCTION
The WAP-10 series is the multi-function, compact new P.A. system you can wear on your waist. With this system, there’s no bulky microphone to hold, your hands are free to carry on your activities, wear this high-performance, hi-fi amplifier on your waist, and the tiny ultra-sensitive mike on your head to boost your voice at a presentation, party, school event, performance ballpark, or even in your own back yard. This high-quality equipment delivers a clear amplification of your voice up to 70m indoors or outdoors and at a price that’s half what you’d normally spend. Enjoy your system and please carefully read this manual before operation.
INSTRUCTION
-
Open the battery cover, and install batteries as polarity indications inside of the battery container, LR6 alkaline ZN-MN or R6Pu ultrahigh power dry batteries or 1300-2800mAH(HR15/51) Ni-MH rechargeable batteries are recommended. The same type and standard battery can be used only.
Note : Never mix dry battery with rechargeable battery, never charge dry battery. Otherwise, these will cause some heavy damage, such as electric shock, explosion, fire etc. -
Connect the microphone to the MIC IN of the unit and wear the system on your waist to start your performance.
-
Place the microphone at the corner of your mouth, and no farther than 13mm (1/2 inch), that be sure your beautiful voice or even each important word can be heard clearly.
-
Insert a USB or SD card, use the MP3 function to play background music to embellish the atmosphere, or use the MP3 REC function to record everything you want and store them to USB or SD memory equipment you desire, and then play the when you need. This will make your work or life more relaxed.
-
If your system is without MP3, then the AUX input terminal allows public address announcements to be made while BGM is being played.
-
No matter the unit with or without MP3 function, it is equipped with an intelligent charge function, use the rechargeable battery will save much money for you. During charge, if the RED recharge LED is extinguished means the charge is finished, please disconnect the adaptor.
-
All WAP-10 series systems are equipped with overcharge protection, there is no need to worry about the damage of the battery because of overcharge. However, to save energy or unnecessary loss, please disconnect the adaptor after the finished charge.
-
For the new battery, please charge up to 14 hours for first time to ensure long life using. The WAP-10 series is the multi-function, compact new P.A. system you can wear on your waist. With this system, there’s no bulky microphone to hold, your hands are free to carry on your activities, wear this high-performance, hi-fi amplifier on your waist, and the tiny ultra-sensitive mike on your head to boost your voice at a presentation, party, school event, performance ballpark, or even in your own back yard. This high-quality equipment delivers a clear amplification of your voice up to 70m indoors or outdoors and at a price that’s half what you’d normally spend. Enjoy your system and please carefully read this manual before operation.
DESCRIPTION
VOL / OFF
Use this knob to power on/ off the whole system and control the whole system’s volume
POWER LED
If the unit is switched on/off, this LED turns on/off. It flashes when it lacks of power and turns off until runs out of power.
MIC IN
Connect the microphone to the unit through the MIC IN to input the signal.
PHONE(WAP-10R)
It’s the signal output. You can insert your earphones to listen to the music.
AUX IN(WAP-10)
AUX input terminal allows public address announcements to be made while BGM is
being played.
DC IN
With the rechargeable batteries put inside, plug system supplied adaptor into the DC IN to charge the batteries, and the adaptor is also can be used as the power supply.
Note: Please stop operating during charge, otherwise, it may shorten the battery’s life.
RECHARGE LED
If the unit is connected to the adaptor, it begins to charge, and this recharge LED turns on. This LED darkles gradually before fully charged and turns off until fully charged.
SD CARD PORT
For inserting SD CARD memory equipment.
USB PORT
For inserting USB memory equipment.
MP3 CONTROL KEYS
Via these keys, you can activate the desired functions described below.
MP3 LCD DISPLAY
All the MP3 pieces of information are monitored through this sexy, magic, blue-lighted display. No operation for about 3 seconds, the LCD will be off, then press any key once the LCD turns blue again and then you can take any operation.
USB/SD-MP3 player section
The file system of USB/SD memory for the USB/SD-MP3 player is FAT16 and FAT32. The player can only decode MP3.
POWER ON/ PLAY/ PAUSE
Press this key and hold on for about 2-3 seconds to turn on/off the MP3 unit and the screen lights blue/goes off. After the MP3 is powered, press it once again the MP3 begins to play. Note: The USB equipment is prior to SD card. In the playing state, press once to pause. If there is no operation for about 3 seconds, the light will be off. Then press any key once the display screen lights blue again and then you can take any operation.
PRE
In the playing or pause state, press this key to select the previous file. It
still keeps the playing or pause state. Press this key and hold on to select
the previous folder.
NEXT
In the playing or pause state, press this key to select the next file. It
still keeps the playing or pause state. Press this key and hold on to select
the next folder:
VOL –
In the opening status, press this key to turn down the volume.
VOL+
In the opening status, press this key to turn up the volume.
SD/USB
Press this key to select and switch the playable store equipment.
REPEAT MODE
In the opening or playing state, press this key and select the four circling
modes in order:
Play in order. ——The player plays the files one by one in order. There is no
icon displayed on the screen.
Repeat 1. —-The player repeats the single file you select. The mark on the
screen is .
Repeat ALL —-The player repeats all the files in the store equipment. The mark
on the screen is .
Random play —The player plays the files at random. The mark on the screen is
“REP”
SEIKAKU TECHNICAL GROUP LIMITED
- NO.I LANE 17, SEC.2, HAN SHI WEST ROAD, TAICHUNG 40151, TAIWAN
- tel: 886-4-22313737
- fax: 886-4-22346757
- www.show-pa.com
- seikaku@seikaku.com
- www.show-pa.com
All rights reserved to SEIKAKU. All features and content might be changed without prior notice. Any photocopy, translation, or reproduction of part of this catalog without written permission is forbidden.
Copyright © 2009 SEIKAKU GROUP
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>