SHOW GEAR Powerbox 4PG Empty – Thomann UK User Manual

SHOW GEAR Powerbox 4PG Empty – Thomann UK

Preface
Thank you for purchasing this Show gear product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.

This user manual contains information concerning:

• Safety instructions
• Installation and operation of the device
• Intended and non-intended use of the device
• Maintenance procedures
• Troubleshooting
• Transport, storage and disposal of the device

Non-observance of the instructions in this user manual may result in serious injuries and damage of property. ©2021 Show gear. All rights reserved.
No part of this document may be copied, published or otherwise reproduced without the prior written consent of High lite International.

• Design and product specifications are subject to change without prior notice.

• For the latest version of this document, please visit our website www.highlite.com or contact us at
  service@highlite.com.

• High lite International and its authorized service providers are not liable for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss arising from the use of, or inability to use or reliance on the information contained in this document.

Introduction

Before Using the Product

Important
Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. After unpacking, check the contents of the box. If any parts are missing or damaged, contact your High lite International dealer.

Your shipment includes:

• Show gear Power BOX 4PG
• User manual
  

Intended Use

This device is intended for professional use as a socket box. It is suitable only for indoor installation. This device is not suitable for households. Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.

Product Lifespan

This device is not designed for permanent operation. Disconnect the device from the electrical power supply when the device is not in operation. This will reduce the wear and will improve the device’s lifespan.

Text Conventions

Throughout the user manual the following text conventions are used:

• Buttons: All buttons are in bold lettering, for example “Press the UP/DOWN buttons”
• References: References to chapters and parts of the device are in bold lettering, for example: “Refer to 2. Safety”, “turn the adjustment screw (02)”
• 0–255: Defines a range of values
• Notes: Note: (in bold lettering) is followed by useful information or tips

Symbols and Signal Words

Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual.

• DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
• WARNING Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
• Attention Indicates important information for the correct operation and use of the product.
• Important Read and observe the instructions in this document.
• Electrical hazard Provides important information about the disposal of this product.

Symbols on the Information Label

This product is provided with an information label. The information label is located on the backside of the device.

The information label contains the following symbols:

• This device shall not be treated as household waste.
• This device is designed for indoor use.

Safety

• Important Read and follow the instructions in this user manual before installing, operating or servicing this product.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual.

Warnings and Safety Instructions

DANGER Danger for children

For adult use only. The device must be installed beyond the reach of children.

• Do not leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within children’s reach. Packaging material is a potential source of danger for children.

DANGER Electric shock caused by dangerous voltage inside

There are areas within the device where dangerous touch voltage may be present.

• Do not open the device or remove any covers.
• Do not operate the device if the covers or the housing are open. Before operation, check if the housing is firmly closed and all screws are tightly fastened.
• Disconnect the device from electrical power supply before service and maintenance, and when the device is not in use.

DANGER Electric shock caused by short-circuit

This device falls under IEC protection class I.

• Make sure that the device is electrically connected to ground (earth). Connect the device only to a socket-outlet with ground (earth) connection.
• Do not cover the ground (earth) connection.
• Do not bypass the thermostatic switch or fuses.
• Do not let the power cable come into contact with other cables. Handle the power cable and all connections with the mains with caution.
• Do not modify, bend, mechanically strain, put pressure on, pull or heat up the power cable.
• Make sure that the power cable is not crimped or damaged. Examine the power cable periodically for any defects.
• Do not immerse the device in water or other liquids. Do not install the device in a location where flooding may occur.
• Do not use the device during thunderstorms. Disconnect the device from the electrical power supply immediately.

Attention Power supply

• Before connecting the device to the power supply, make sure that the current, voltage and frequency match the input voltage, current and frequency specified on the information label on the device.
• Make sure that the cross-sectional area of the extension cords and power cables is sufficient for the required power consumption of the device.

Attention General safety

• Do not connect the device to a dimmer pack.

• Do not switch the device on and off in short intervals. This decreases the device’s life.

• Do not shake the device. Avoid brute force when installing or operating the device.

• If the device is dropped or struck, disconnect the device from the electrical power supply
  immediately.

• If the device is exposed to extreme temperature variations (e.g. after transportation), do not switch it on immediately. Let the device reach room temperature before switching it on, otherwise it may be damaged by the formed condensation.

• If the device fails to work properly, discontinue the use immediately

Attention For professional use only
This device shall be used only for the purposes it is designed for.

This device is designed to be used as a socket box. Any incorrect use may lead to hazardous situations and result in injuries and material damage.

• This device is not suitable for households.
• This device is not designed for permanent operation.
• This device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage.

Attention
Before each use, examine the device visually for any defects.

Make sure that:

• All screws used for installing the device or parts of the device are tightly fastened and are not corroded.
• The safety devices are not damaged.
• There are no deformations on housings, fixations and installation points.
• The power cables are not damaged and do not show any material fatigue.

Attention
Do not expose the device to conditions that exceed the rated IP class conditions

This device is IP20 rated. IP (Ingress Protection) 20 class provides protection against solid objects greater than 12 mm, such as fingers, and no protection against harmful ingress of water.

Requirements for the User

This product may be used by ordinary persons. Maintenance may be carried by ordinary persons. Installation and service shall be carried out only by instructed or skilled persons. Contact your High lite dealer for more information. Instructed persons have been instructed and trained by a skilled person, or are supervised by a skilled person, for specific tasks and work activities associated with the installation, service and maintenance of this product, so that they can identify risks and take precautions to avoid them. Skilled persons have training or experience, which enables them to recognize risks and to avoid hazards associated with the installation, service and maintenance of this product. Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons include not only users of the product but also any other persons that may have access to the device or who may be in the vicinity of the device.

Description of the Device

The Shouted PSA-63A4C is a socket box for lighting or back-line equipment. The device is suitable for self-made power cables.

Front View

• Cable gland for the power cable
• LED power indicator
• 4 x Schake power connector OUT

Product Specifications

• Model: Power BOX 4PG

Electrical:

• Input voltage: 220–240 V AC, 50 Hz
• Rated current: 10 A
• Power connector IN: Open end
• Power connector OUT: 4 x Schuko, 10 A RMS/16 A peak
• Pins: 3
• Maximum wire size: 2,5 mm2/14 AWG

Physical:

• Tunnel width: 30 mm
• Dimensions: 355 x 90 x 75 mm (LxWxH)
• Weight: 0,7 kg

Operation and control:

• LED indicators: Power

Construction:

• Housing: ABS
• Color: Black
• IP rating: IP20

Thermal:

• Ambient temperature ta: From -10 °C to 40 °C

Optional Accessories

You can additionally purchase the following accessories: Product code: 90659 (Power BOX clamp) Product code: D9575B (Snap Fastener 22)

Dimensions

Installation

Safety Instructions for Installation

WARNING
Incorrect installation can cause serious injuries and damage of property.
If trussing systems are used, installation must be carried out only by instructed or skilled persons.
Follow all applicable European, national and local safety regulations concerning rigging and trussing.

Personal Protective Equipment

During installation and rigging wear personal protective equipment in compliance with the national and
site-specific regulations.

Installation Site Requirements

• The device must be installed only indoors.
• The device can be placed on a flat surface or be mounted to a truss or other rigging structure in any orientation.
• The maximum ambient temperature ta = 40 °C must never be exceeded.
• The relative humidity must not exceed 50 % with an ambient temperature of 40 °C

Rigging

The device can be positioned on a flat surface or mounted to a truss or other rigging structure in any orientation. Make sure that all loads are within the pre-determined limits of the supporting structure.

CAUTION Restrict the access under the work area during rigging and/or derigging.

The mounting options are as follows:

• Option 1: installation with the Snap Fastener 22 Use the Snap Fastener 22 to attach the device to the supporting structure, as shown in Fig. 04. Put the snap fastener through the slot.
• Note: The Snap Fastener (product code: D9575B) is not included in the delivery. You can purchase it with any High lite International dealer.

• Option 2: installation with the Power BOX clamp Use the Power BOX clamp to attach the device to the supporting structure, as shown in Fig. 05.
• Note: The Power BOX clamp (product code: 90659) is not included in the delivery. You can purchase it with any High lite International dealer.

Connecting to Power Supply

DANGER Electric shock caused by short-circuit

The device accepts AC mains power at 220–240 V and 50 Hz. Do not supply power at any other voltage or frequency to the device. This device falls under IEC protection class I. Make sure that the device is always electrically connected to the ground (earth).

Before connecting the device to the socket-outlet:

• Make sure that the power supply matches the input voltage specified on the information label on the device.
• Make sure that the socket-outlet has ground (earth) connection.

Connect the device to the socket-outlet with a self-made power cable.

Setup

Warnings and Precautions

Attention
Connect all cables before supplying power. Disconnect power supply before connecting or disconnecting cables.

Operation

Safety Instructions for Operation

Attention
This device must be used only for the purposes it is designed for.

This device is intended for use as a socket box. It is suitable only for indoor installation. It is not suitable for households. Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use

• Attention Power supply

Before connecting the device to the power supply, make sure that the current, voltage and frequency match the input voltage, current and frequency specified on the information label on the device.

Start-up

• Connect one end of your self-made power cable to the cable gland (01).
• Connect the other end to the appropriate 220–240 V AC power supply.
• Connect other devices to the Schuko outputs (03).

Troubleshooting

This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage.

Refer servicing to instructed or skilled persons. Contact your High lite International dealer in case the solution is not described in the table.

• Problem   Probable cause(s)   Solution
• The device does not function at all
• No power to the device
  • Check if power is switched on and cables are plugged in
  • Check the total load of the connected devices.

Maintenance

Safety Instructions for Maintenance

• DANGER Electric shock caused by dangerous voltage inside

Disconnect power supply before servicing or cleaning.

Preventive Maintenance

Attention Before use, examine the device visually for any defects.

Make sure that:

• All screws used for installing the device or parts of the device are tightly fastened and are not corroded.
• There are no deformations on housings, fixations and installation points.
• The power cables are not damaged and do not show any material fatigue.

Basic Cleaning Instructions

To clean the device, follow the steps below:

1. Disconnect the device from the electrical power supply.
2. Allow the device to cool down for 5 minutes.
3. Clean the device with a soft, lint-free cloth.

Attention

• Do not immerse the device in liquid.
• Do not use alcohol or solvents.

Corrective Maintenance

The device does not contain user-serviceable parts. Do not open the device and do not modify the device. Refer repairs and servicing to instructed or skilled persons. Contact your High lite International dealer for more information.

Deinstallation, Transportation and Storage

• Disconnect power supply before deinstallation.
• Use the original packaging to transport the device, if possible.
• Clean the device before storing. Follow the cleaning instructions in chapter 8.2.1. Basic Cleaning Instructions on page 12.
• Store the device in the original packaging, if possible.

Disposal

Correct disposal of this product
Waste Electrical and Electronic Equipment
This symbol on the product, its packaging or documents indicates that the product shall not be treated as household waste. Dispose of this product by handing it to the respective collection point for recycling of electrical and electronic equipment. This is to avoid environmental damage or personal injury due to uncontrolled waste disposal. For more detailed information about recycling of this product contact the local authorities or the authorized dealer.

Approval

Check the respective product page on the website of High lite International (www.highlite.com) for an available declaration of conformity.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>