Wood Show Electronic WX1502 Alarm Clock Instructions
- June 6, 2024
- Wood Show Electronic
Table of Contents
WX1502 Alarm Clock Instructions
Missing accessories or any other problems, please contact us: ThreeDucksDirect@outlook.com
Structure
- PM Indicator — When it’s on, it means p.m. It’s only used for 12-Hour mode. It will be off when you select 24-Hour.
- Alarm Indicator — if you switch on 1 of the alarms, it will be on.
- Wireless Charging Area—Please place your phone in the center area. DON’T attach steel items on your phone.
Notice: Attaching steel item on your phone may affect wireless charging, or even heat up and burn your phone.
-
Humidity — It shows the indoor humidity rate. It’s detected by sensor, which cannot be changed manually.
-
Temperature — It shows indoor temperature in “C or *F. It’s detected by the sensor, which cannot be changed manually. You can press the “RETURN” button to change unit t / ‘F. The display area can be replaced by “Date”. To replace it, please see 2.2 .0
Tips: Due to technical issues, it can’t hide the “humidity” and get both “Date” and “Temperature” at the same time. -
Sound Control — ON: Screen display will disappear unless you tap it or make any noise. OFF: It will keep always on.
Notice! To keep it always on, we recommend most users to turn OFF sound control function
-
ALARM — Hold the “ALARM” button to set alarm time and weekend mode. “— : E” = Every day “oN:E” = weekdays only
-
RETURN — On the main screen, press the “RETURN” button to change ‘C/ ‘F. In the setting menu, press it to save & exit setting.
-
TIME – Hold ‘TIME” button to set “Year”, “Date”, “12H/24H”, “Time”, “Display Mode”.
Tips: DP-1 = display mode—I. To know more about display mode, please see 2.2 .0 -
RESET – If you find the clock works abnormally, you can use a small stick to push the “RESET” button to initialize.
A. Scroll Wheel —Turn it to adjust brightness in normal status or select value
in the setting menu.
B. CR2032 time memory battery – It’s used for memorizing settings. It CAN NOT
work as a power source.
C. Alarm Switch – Switch it on if you want the alarm function.
D. Power supply – Please use the original power cord and adapter. If missing,
please contact us.
Package Includes
1 x Digital Alarm Clock
1x User Manual
1 x USB Cable
Setting
Wireless charging:
- Plugin the 5V2A power adapter with the clock. The adapter comes with the package. You can also use your 5V2A phone adapter instead. However, please understand DO NOT use a 5V1A adapter because its power is not enough for wireless charging. (Needs 5V2A or above)
- Place your wireless phone on the correct charging area. Make sure your phone case is NOT thicker than 5mm.
Compatible models:
– iPhone 8, ‘phone X and newer generations.
– Samsung Note9, S9. S94-, Note8, 58, 58+, S7 Edge, S7, and other newer
generations.
– any other phones that support wireless charging may be compatible with.
Time setting
Alarm setting
Brightness Setting:
- Turn Scroll wheel to adjust brightness.
2. 7 Brightness levels
L7—- 100%
L6 —- 75%
LS—- 50%
L4—- 25%
L3—- 10%
L2 —- 2%
L1—- 0%
Pay attention to 1.1 brightness. It’s 0% so the display will disappear.
Sound Control
2. Sound Control ON: The display will disappear unless any sounds to wake it
up or you can tap it, knock it for displaying.
Sound Control OFF: The display will be always on. We recommend users to turn
OFF sound control to keep it always on.
Temperature Setting:
Press the “RETURN” button to change the temperature unit from °C to °F Tips: You can also press the “RETURN” button to exit the setting menu.
Snooze Setting:
- When the alarm rings, press any button to get snooze for 9 mins
- You can repeat the same to get another 9 mins.
- If you want to stop the alarm, press any button TWICE to stop it.
Reset Setting:
Use a needle or little stick to push the “RESET” hole to reset all settings.
CR2032 is only used for memorizing settings, it will still keep the time even
if the clock isn’t plugged in.
Product Features
Input Voltage: AC 110v-240V, 50/6011Z.
Output Voltage: DCSV / 500MA-2100MA.
Trouble Shooting
- For the missing power cord or instructions, please contact us on Amazon or by email for a new replacement.
- If you found the clock lime only appears when you touch it. Don’t worry. It’s just because you’ve set it to sound control mode by mistake. Just follow section 2.5 — Sound Control Mode to get it right.
- Please understand the temperature sensor is pre-set inside the clock. As electronic components may produce heat when working. So it’s normal that the temperature is not as accurate as another professional thermometer. It’s normal there are 1-2 degrees difference. The temperature cannot reset manually because it’s detected by the sensor automatically. If the difference is higher than 5 degrees, please contact us for a new replacement.
- If some numbers are getting dimmer or flash constantly, please take a picture or a short video and contact us for a new replacement.
- Please use the original power cord and adapter to work. if it’s broken, please contact us for a new power cord & adapter.
- If you find the clock fails to remember settings. That’s because the CR2032 memory battery has run out of its power. You have to take out the battery shelf on the back of the clock to change the CR2032 battery.
- Default display content includes Time, Temperature (Date), Humidity. It cannot hide temperature (Date) or humidity. It’s unable to display time only.
- In the new version since 2020, the 2 spots “: between “Flour” and “Min” is fixed. It’s normal it doesn’t flash. That’s our new design to better prevent disturbing users at night.
- If you plug in the clock and find it doesn’t display anything. Try to roll the scroll wheel on the back. It may be set to LI (0%) brightness by mistake.
- You may meet a situation the clock adjusts the brightness automatically, and maybe it’s not your favorite brightness. That’s because of the auto-dimming function. If you want the clock to remember your favorite brightness. Follow the below steps: a. Normally the clock will automatically be brighter after 6:00 a.m. and be dimmer after 6:00 p.m.
b. If you want to change the auto-brightness, you can set the brightness after 6:00 a.m. and set the brightness again after 6:00 p.m.( 18:00 )
c. After that, the clock will remember your favorite brightness both in the morning and evening.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>