CERTA CTCSWAVINVA Modified Sine Wave Can Inverter User Guide
- June 15, 2024
- CERTA
Table of Contents
CERTA CTCSWAVINVA Modified Sine Wave Can Inverter
Product Information
Specifications
- Input voltage: DC 12V
- Output voltage: AC 230V
- Continuous power: 150W
- Peak power: 300W
- Output frequency: 50Hz+/- 3Hz
- Output waveform: Modified sine wave
- Output efficiency : >85%
- 12V input, No load current: [specification not provided]
Safety & Warnings
Before first use, read all safety warnings and instructions in this user
guide. Retain this user guide for future reference.
Disposal: This marking indicates that this appliance should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Overview
- AC socket
- USB port
- Power switch
- 12V plug
Installation
- Ensure the inverter power switch is in the OFF position.
- Plug the inverter into the vehicle’s 12V socket.
- Place the inverter in the cup holder of the car.
- Check the electrical requirements of the devices by examining the compliance plate or sticker. If unsure, contact the manufacturer for guidance. It’s important to note that the inverter must be able to produce the required amount of continuous power. For example, if the appliance needs 650 watts, a 1000W inverter would be necessary.
- Turn on the vehicle, the inverter, and the connected devices.
- Disconnect the devices and the inverter when they are no longer in use.
Note: If the self-protection system is activated, disconnect the inverter from the vehicle. Wait approximately 30 seconds before reconnecting it.
FAQ
-
Q: Can I use this inverter with a 24V battery?
A: No, this inverter is designed to work with a 12V battery. Using it with a 24V battery may damage the inverter and void the warranty. -
Q: What devices can I power with this inverter?
A: This inverter is suitable for powering small electronic devices such as laptops, smartphones, tablets, cameras, and other low-power AC appliances. -
Q: Can I leave the inverter plugged in when the car is turned off?
A: It is recommended to disconnect the inverter when the car is turned off to prevent draining the vehicle’s battery.
SAFETY & WARNINGS
Before first use, read all safety warnings and instructions in this user guide. Retain this user guide for future reference.
- Use the inverter in a dry, dust-free location. Ensure proper ventilation by not covering or blocking ventilation openings.
- Confirm the input voltage of the inverter is matched to the output of vehicle’s 12V socket and confirm the rated power of the appliance is within the range of power inverter.
- Avoid using this device when the engine is off, otherwise, it may damage the car battery.
- Avoid installing the inverter in compartments that contain batteries or flammable materials or atmospheres as the components of the inverter can produce arcs or sparks.
- If this product shows any signs of damage, cease use immediately and contact help.Kogan.com for support.
- Do not operate the inverter near water, with wet hands or in areas with high humidity.
- This product does not contain user serviceable parts, do not attempt to open, modify or disassemble this product in anyway.
- Do not operate the inverter near combustible gas, explosives or fire.
- Do not connect appliances that may feed power back into the inverter.
- To avoid electric shock, do not place metal objects into the inverter.
- Do not touch the metal of the socket while inserting the plug into the socket.
- Do not allow children to play with this product.
Disposal
This marking indicates that this appliance should not be disposed with other
house-hold wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
OVERVIEW
INSTALLATION
- Ensure the inverter power switch is in the OFF position.
- Plug the inverter into the vehicle’s 12V socket.
- Place the inverter in the cup holder of the car.
- Check the electrical requirements of the devices by examining the compliance plate or sticker. If unsure, contact the manufacturer for guidance. It’s important to note that the inverter must be able to produce the required amount of continuous power. For example, if the appliance needs 650 watts, a 1000W inverter would be necessary.
- Turn on the vehicle, the inverter and the connected devices.
- Disconnect the devices and the inverter when they are no longer in use.
Note
If the self-protection system is activated, disconnect the inverter from the
vehicle. Wait approximately 30 seconds before reconnecting it.
SPECIFICATIONS
- Input voltage DC 12V
- Output voltage AC 230V
- Continuous power 150W
- Peak power 300W
- Output frequency 50Hz+/- 3Hz
- Output waveform Modified sine wave
- Output efficiency >85%
- 12V input, No load current <0.45A
- Low voltage protection DC 10.2 – 10.8V
- Over voltage protection DC 15-16V
- Operation temperature 5°C–35°C
- USB output DC 5V,2.1A
Need more information?
- We hope that this user guide has given you the assistance needed for a simple set-up.
- For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
- kUgan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>