LANCOM 1800EF Networking System User Guide
- June 3, 2024
- LANCOM
Table of Contents
LANCOM 1800EF Networking System
Overview
①| Ethernet interfaces
Use the cable with the kiwi-colored connectors to connect one of the
interfaces ETH 1 to ETH 4 to your PC or a LAN switch.|
---|---|---
②| WAN interface
Use the cable with the green connectors to connect the WAN interface to your
WAN modem.|
③| SFP interface
Insert a suitable LANCOM SFP module (e.g. 1000Base-SX or 1000Base-LX) into the
SFP port. Choose a cable compatible with the SFP module and connect it as
described in the SFP module’s mounting instructions www.lancom-systems.com
/SFP-module-MI. SFP module and
cable are not included.|
④| USB interface
Connect a USB data medium or a USB printer to the USB interface. (cable not
supplied)|
⑤| USB-C configuration interface
A USB-C cable is required to configure the device (cable not supplied)|
⑥| Power
After connecting the cable to the device, turn the bayonet connector 90°
clockwise until it clicks into place. Use only the supplied power adapter.|
| Please
observe the following when setting up the device
Do not rest any objects on top of the device
For devices to be operated on the desktop, please attach the adhesive rubber footpads
In case of wall mounting, use the drilling template as supplied
---|---
| > Keep all ventilation slots on the side of the device clear of obstruction
Rack installation with the optional LANCOM Rack Mount (separately available)
Please note that support for third-party accessories is not provided.
---|---
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide! Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
① Power
Off| Device switched off
Red/green, blinking| Device operational, resp. device paired / claimed and
LANCOM Management Cloud (LMC) accessible
Red, blinking| Hardware error
Red, blinking slowly| Time or charge limit reached/error message occurred
1x green inverse blinking| Connection to the LMC active, pairing OK, device
not claimed
2x green inverse blinking| Pairing error, resp. LMC activation code not
available
3x green inverse blinking*| LMC not accessible, resp. communication error
② Online
Off| WAN connection inactive
Green, blinking| WAN connection is established (e.g. PPP negotiation)
Green, permanently| WAN connection active
Red, permanently| WAN connection error
③ SFP
Off| SFP deactivated in the configuration or SFP module present, no connection
to network device
Red, permanently| SFP enabled in the configuration but no SFP module present
Green, permanently| SFP module present, connection to network exists, no data
transmission
Green, blinking| Data transmission
Red, blinking| SFP module present, hardware error
④ WAN
Off| Interface deactivated
Orange, blinking| Synchronization with the modem
Orange, permanently| Synchronization with the modem successfuI
Green, permanently| WAN connection established
Green, flickering| WAN data transmission
Red/orange, blinking| Hardware error, ext. modem
⑤ETH1 – ETH4
Off| No link
Green, permanently| Network connection ready (link)
Green, flickering| Data transmission
⑥ VPN|
Off| No VPN connection active
Green, permanently| VPN connection active
Green, blinking| Establishing VPN connection
⑦ Reset
Pressed up to 5 seconds device restart
Pressed until first
flashing up of all LEDs configuration reset and device restart
*) The additional power LED statuses are displayed in 5-seconds TECHNICAL DETAILS rotation if the device is configured to be managed by the LANCOM Management Cloud.
Hardware
Power supply| 12 V DC, external power adapter (110 or 230 V) with bayonet
connector to secure against disconnection
Power consumption| Max. 15 W
Environment| Temperature range 0 – 40 °C; humidity 0 – 95 %; non-condensing
Housing| Robust synthetic housing, rear connectors, ready for wall mounting,
Kensington lock; (W x H x D) 210 x 45 x 140 mm
Fan| 1 quiet fan
Interfaces
WAN| 10 / 100 / 1000 Mbps Gigabit Ethernet
ETH| 4 individual 10 / 100 / 1000-Mbps Fast Ethernet ports; operate as switch
ex-factory. Up to 3 ports can be switched as additional WAN ports.
USB| USB 2.0 Hi-Speed host port for connecting USB printers (USB print
server), serial devices (COM-port servers), USB data media (FAT file system),
or supported UMTS USB modems
SFP| Socket for small form-factor pluggable Gigabit-Ethernet transceiver
(mini-GBIC). Compatible with optional LANCOM SFP modules for optical
connections over short distances (SX) or longer distances (LX). Set as a LAN
port ex-factory, can be configured as a WAN port.
Configuration interface USB-C configuration interface
WAN protocols
Ethernet| PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or
without DHCP), RIP-1, RIP-2, VLAN, IP
Declaration of Conformity
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc
Package content
Documentation| Hardware Quick Reference Guide (DE/EN); Installation Guide
(DE/EN)
Cable| 2 Ethernet cables, 3m (LAN: kiwi-colored connector; WAN: green
connector)
Power adapter| External power supply adapter (230 V), 12 V / 2 A DC/S; barrel
/ bayonet (EU), LANCOM item no. 111303 (not for WW devices)
This product contains separate open-source software components which are subject to their own licenses, in particular the General Public License (GPL). The license information for the device firmware (LCOS) is available on the device‘s WEBconfig interface under “Extras > License information“. If the respective license demands, the source files for the corresponding software components will be made available on a download server upon request.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>