QINGDAO MWH536B WiFi-BT Module User Manual
- June 1, 2024
- QINGDAO
Table of Contents
QINGDAO MWH536B WiFi-BT Module
Product Information
- Model: MWH536B
- Product Name: WiFi/BT Module
- Interface: USB2.0
- Supply Voltage: Dimension
Product Usage Instructions
Installation:
To install the WiFi module, follow these steps:
- Pass the large round hole of the module through the limit column of the bracket of the TV.
- Fix the module by snap-fitting it onto the bracket securely.
Power Supply:
The voltage supplied by the system to the module needs to be transmitted by a
voltage regulator or circuit for proper functioning.
Operating Countries:
This equipment may be operated in all European countries.
RF Output Power:
- Band: WLAN
- Limited Power: 2412MHZ-2484MHZ
FAQ:
-
Q: Can this module be used with any TV?
A: The module is designed to work with TVs that support USB2.0 interface. -
Q: What is the storage temperature range for this module?
A: The storage temperature range is [specify temperature range].
Product Description
The product description
The user can achieve a TV connection WIFI net, through this module and the
voltage supplied by the system to the module needs to be transmitted by a
voltage regulator or circuit
- This equipment may be operated in all European countries.
- The module installation method is as follows: pass the large round hole of the module through the limit column of the bracket of the TV, and fix the module by the snap-fit on the bracket.
Basic Parameters
Feature Description
|
Feature Description
---|---
Model| MWH536B
Product Name| WiFi/BT Module
Interface| USB2.0
Supply Voltage| 5V±0.5V
Dimension| 76.0×40.0×4.88mm
Operating Temperature| 0°C to 70°C
Storage Temperature| -40°C to 80°C
RF output power
| Band | Limited power | |
|---|---|---|
| WLAN | 2412MHZ-2484MHZ | <24dBm |
5150MHZ-5850MHZ
The display method of Model approved code
In the factory, the model approval code is pasted on the back shell in a
label.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used under the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of FCC RF Rules.
This equipment should be installed and operated with a minimum distance of 20
in (50cm)between the radiator and your body. This transmitter must not be co-
located or operated in conjunction with any other antenna or transmitter.
CAUTION:
To comply with the limits of the Class B digital device under Part 15 of the
FCC Rules, this device is compliant with Class B limits. All peripherals must
be shielded and grounded. Operation with non-certified peripherals or non-
shielded cables may result in interference to radio or reception.
MODIFICATION
To assure continued compliance, Any changes or modifications not expressly
approved by the grantee of this device could void the user’s authority to
operate the device.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 50 cm(8 in )between the radiator and your body NOTE To
satisfy FCC exterior labelling requirements, the following text must be placed
on the exterior of the end product Contains Transmitter module FCC ID:***
To satisfy IESD exterior labelling requirements, the following text must be
placed on the exterior of the end product ” Contains Transmitter module IC:
This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.
IC Statement
- the device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; Footnote4
- for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
- for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate; and
- where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement outlined in section 6.2.2.3 shall be indicated.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.
Contact Information
- Manufacturer: Qingdao Intelligent & Precise Electronics Co., Ltd.
- Address: No.218 Qianwangang Road, Qingdao Economic & Technological Development Zone, Qingdao City, Shandong Province, P. R. China
Importers:
- Hisense France SAS
- Address: 9 Rue des 3 Soeurs, 93420 Villepinte, France Hisense Iberia, S.L.U
- Address: Ronda Auguste y Louis Lumiere. 23 Nave 12. Edificio Lumiere – Parque
- Tecnológico 46980 Paterna (Valencia) – Spain Hisense Italia S.r.l
- Address: Via Montefeltro, 6/A, 20156 MILANO Hisense South Africa
- Address: The Estuaries, Building 17 Oxbow Crescent, Century City, Cape Town, South Africa