Qingdao MWH540S WiFi BT Module User Manual
- June 1, 2024
- QINGDAO
Table of Contents
Qingdao MWH540S WiFi BT Module
Product Information
Specifications
- Model: MWH540S
- Product Name: WiFi/BT Module
- FCC ID: 2AJVQ-MWH540S
- Interface: USB2.0
- Supply Voltage: Voltage supplied by the system through a voltage regulator or circuit
- Dimension: 27mm x 18mm x 2.4mm
- Operating Temperature: Not specified
- Storage Temperature: Not specified
Product Usage Instructions
Installation
- The module installation method is as follows: pass the large round hole of the module through the limit column of the bracket of the TV, and fix the module by the snap-fit on the bracket.
- Connect the external IPEX antenna to the antenna pedestal of the module.
Connecting to WIFI
- To connect your TV to a WIFI network using this module, ensure the module is securely installed as per the installation instructions.
- Access the TV settings menu and locate the WIFI setup option.
- Select the WIFI network you wish to connect to and enter the password if required.
FAQ
- Q: Can this module be used in all European countries?
- A: Yes, this equipment may be operated in all European countries.
- Q: What is the FCC ID of this module?
- A: The FCC ID of this module is 2AJVQ-MWH540S.
The Product Description
- The user can achieve TV connection WIFI net, through this module and the voltage supplied by the system to the module needs to be transmitted by a voltage regulator or circuit This equipment may be operated in all European countries.
- The module installation method is as follows: pass the large round hole of the module through the limit column of the bracket of the TV, and fix the module by the snap-fit on the bracket. Connect the external IPEX antenna to the antenna pedestal of the module.
Basic Parameters
| Feature Description | Feature Description |
|---|---|
| Model | MWH540S |
| Product Name | WiFi/BT Module |
| FCC ID | 2AJVQ-MWH540S |
| Interface | USB2.0 |
| Supply Voltage | 3.3V±0.2V |
| Dimension | 27（mm）18（mm）2.4(mm) |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
RF Output Power
| Band | Limited power | |
|---|---|---|
| WlAN | 2412MHZ-2472MHZ | <20dBm |
5150-5350 MHz, 5470-5850MHz
BT| 2400MHz-2483.5MHz| <20dBm
The display method of Model approved code
In the factory the model approve code is pasted on the back shell in a label.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of FCC RF Rules.
This equipment should be installed and operated with a minimum distance of 20
in (50cm)between the radiator and your body. This transmitter must not be co-
located or operated in conjunction with any other antenna or transmitter.
CAUTION
To comply with the limits of the Class B digital device according to Part 15
of the FCC Rules, this device is compliant with Class B limits. All
peripherals must be shielded and grounded. Operation with non-certified
peripherals or non-shielded cables may result in interference to radio or
reception.
MODIFICATION
To assure continued compliance, Any changes or modifications not expressly
approved by the grantee of this device could void the users’ authority to
operate the device.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 50 cm(8 in )between the radiator and your body NOTE To
satisfy FCC exterior labelling requirements, the following text must be placed
on the exterior of the end product Contains Transmitter module FCC ID: 2AJVQ-
MWH540S. To satisfy IESD exterior labeling requirements, the following text
must be placed on the exterior of the end product ” Contains Transmitter
module IC: ***
- This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
- 8. RSS-GEN 8.4 User Manual Notice
- This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
- Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device is restricted to indoor use only when operating in the 2400 to 2483.5 MHz、5150 to 5350 、5470 to 5850MHz MHz frequency range.
CONTACT
- Manufacturer: Qingdao Intelligent & Precise Electronics Co., Ltd.
- Address: 218 Qianwangang Road, Qingdao Economic & Technological Development Zone,
- Qingdao, China
- Importers:
- Hisense France SAS
- Address: 9 Rue des 3 Soeurs, 93420 Villepinte, France
- Hisense Iberia, S.L.U
- Address: Ronda Auguste y Louis Lumiere. 23 Nave 12. Edificio Lumiere – Parque
- Tecnológico 46980
- Paterna (Valencia) – Spain
- Hisense Italia S.r.l
- Address: Via Montefeltro, 6/A, 20156 MILANO
- Hisense South Africa
- Address: The Estuaries, Building 17 Oxbow Crescent, Century City, Cape Town, South Africa