Qingdao Yidehengtong Trade DS-LY-9235 Ceiling Fan with Light User Manual

June 5, 2024
Qingdao Yidehengtong Trade

Qingdao Yidehengtong Trade DS-LY-9235 Ceiling Fan with Light User Manual

CEILING FAN LIGHT INSTALLATION VIDEO

Please see the seventh picture on the product details page for the ceiling fan lamp installation video, or you can view it in the installation video section of our Amazon brand flagship store.

Please see the seventh picture on the product details page for the ceiling fan lamp installation video, or you can view it in the installation video section of our Amazon brand flagship store

CEILING FAN INSTALLATION TOOL LIST

CEILING FAN ACCESSORIES LIST

1.INSTALL THE SPEAKER IN THE LAMPSHADE

Put the speaker cover on the lampshade
Put the speaker inner cover from the inside of the Lam ‘shade

Insert the screw from the outer hole of the speaker cover, tighten the nut and he screw, and then tighten the remaining three screws in turn

2.INSTALL THE LIGHT SOURCE, SPEAKER AND LAMPSHADE

Unscrew the 4 screws on the motor with a screwdriver in turn

Use a screwdriver to tighten the four screws previously removed from the motor with the four holes of the lamp cover in turn.

3.INSTALL CEILING FAN DOWNROD ,COUPLING COVER AND CANOPY

Remove the R pin from the motor and bolts, and loosen the screws on both sides

Pass the three wires of the motor through the Coupling cover, canopy and downrod in turn

Lift the coupling cover, pass the bolt out of the hole in the motor base, then insert the R pin into the bolt.Finally, tighten the 2 screws evenly from both sides, otherwise it will cause the fan to shake. 15

4.MOUNTING BRACKET INSTALLATION,INSTALL THE CEILING FAN TO THE MOUNTING

BRACKET

Use an electric drill to screw 4 self-tapping screws into the wooden ceiling to fix the mounting bracket A

Use an electric drill to screw 4 self-tapping screws into the wooden ceiling to fix the mounting bracket 1

Hang the motor to the ceiling mounting bracket,rotating the ball to mesh the groove of the ball with the bump of the hanger, the down rod must fix to the round hole, and confirm its stability,otherwise it will cause the fan to shake.

5.INSTALL THE REMOTE CONTROL RECEIVER

Connect the black wire of the receiver to the live wire of the ceiling, the white wire to the Neutral wire of the ceiling, and yellow wire on Downrod to the earth wire.
Connect the wire of the motor and the wire of the remote control receiver according to the color, and then put on the red wire protective cover.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals