Qingdao MWH415S TV’s WiFi Module User Manual
- June 1, 2024
- QINGDAO
Table of Contents
Qingdao MWH415S TV’s WiFi Module
Specifications
- Model: MWH415S
- Product Name: WiFi Module
- FCC ID: 2AJVQ-MWH415S
- IC ID: 22470-MWH415S
- Interface: USB2.0
- Supply Voltage: Requires voltage regulation
- Dimension: 28mm x 16mm x 3.05mm
- Operating Temperature: Not specified
- Storage Temperature: Not specified
Product Usage Instructions
Installation
- Pass the large round hole of the module through the limit column of the bracket of the TV.
- Fix the module by snap-fitting it onto the bracket.
- Connect the external IPEX antenna to the antenna pedestal of the module.
Power Supply
The module requires a regulated voltage supply from the system. Ensure proper voltage regulation or circuit is in place to supply power to the module.
RF Output Power
- Band: WLAN
- Limited Power: Not specified
- WLAN Frequency Range: 2412MHz – 2472MHz
FAQ
- Q: Can this WiFi module be used outside of European countries?
- A: Yes, this equipment may be operated in all European countries.
- Q: What type of antenna connection does the module support?
- A: The module supports an external IPEX antenna connection.
The product description
The user can achieve TV connection WIFI net, through this module and the voltage supplied by the system to the module needs to be transmitted by a voltage regulator or circuit This equipment may be operated in all European countries. The module installation method is as follows: pass the large round hole of the module through the limit column of the bracket of the TV, and fix the module by the snap-fit on the bracket. Connect the external IPEX antenna to the antenna pedestal of the module
Basic parameters
Feature Description | Feature Description |
---|---|
Model | MWH415S |
Product Name | WiFi Module |
FCC ID | 2AJVQ-MWH415S |
IC ID | 22470-MWH415S |
Interface | USB2.0 |
Supply Voltage | 3.3V±0.33V |
Dimension | 28(mm)16(mm)3.05(mm) |
Operating Temperature | -10°C to 70°C |
Storage Temperature | -40°C to 85°C |
RF output power
Band | Limited power | |
---|---|---|
WlAN | 2412MHZ-2472MHZ | <20dBm |
The display method of Model approved code
In the factory, the model approval code is pasted on the back shell in a label.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of FCC RF Rules. This equipment should be installed and operated with minimum distance of 20 in (50cm)between the radiator and your body. This transmitter must not be co- located or operated in conjunction with any other antenna or transmitter
CAUTION:
To comply with the limits of the Class B digital device pursuant to Part 15 of the FCC Rules, this device is compliant with Class B limits. All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception
MODIFICATION
To assure continued compliance, Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the device.
Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 50 cm(8 in )between the radiator and your body NOTE To
satisfy exterior labelling requirements, the following text must be placed on
the exterior of the end product Contains Transmitter module To satisfy IESD
exterior labeling requirements, the following text must be placed on the
exterior of the end product ” Contains Transmitter module
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product. RSS-GEN
8.4 User Manual Notice This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: This device may not cause interference. This device
must accept any interference, including interference that may cause undesired
operation of the device.
8. This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Manufacturer:
Qingdao Intelligent & Precise Electronics Co., Ltd. Address: 218 Qianwangang
Road, Qingdao Economic & Technological Development Zone, Qingdao, China
Importers:
- Hisense France SAS
- Address: 9 Rue des 3 Soeurs, 93420 Villepinte, France
- Hisense Iberia, S.L.U
- Address: Ronda Auguste y Louis Lumiere. 23 Nave 12. Edificio Lumiere – Parque
- Tecnológico 46980
- Paterna (Valencia) – Spain
- Hisense Italia S.r.l
- Address: Via Montefeltro, 6/A, 20156 MILANO
- Hisense South Africa
- Address: The Estuaries, Building 17 Oxbow Crescent, Century City, Cape Town, South Africa
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>