Nookbeya BB701K Electric Baby Swing User Manual
- May 15, 2024
- Nookbeya
Table of Contents
Nookbeya BB701K Electric Baby Swing
Clean & Maintenance
Clean
- Clean the base bracket and seat frame with wet cloth and a mild detergent. Dry thoroughly then. Please do not use corrosive cleaner.
- Removable and washable fabric
- Seat fabric: Clean it with wet cloth and a mild detergent, and dry it.
- Canopy: Take it off and put a little cleaner, wash it gently by hands. Rinse it with clean water, and then hang it to dry, avoiding exposure to the sun.
- Pillow: Tear the Velcro off and take the pillow off. Put a little cleaner, wash it gently by hands, and then rinse it with clean water. Hang it avoiding sun exposure.
Maintenance
- Please check this baby swing regularly. Make sure of each part is well connected and well installed. Stop using for poor connection and connect/ install it again if necessary.
- This product contains electronic components, which shall not be used in water or in a humid environment. Please ensure the product is dry, and store it in a cool and dry place, avoiding direct sunshine for a long time.
Troubleshooting
Fast self-inspection solution below
Note: For other trouble, please contact our customer service for help.
Never disassemble and repair the swing by yourself.
WARNING
- Never leave the child unattended
- Do not use this product once your child can sit up unaided or weighs more than 9 kg.
- This product is not intended for prolonged periods of sleeping.
- Never use this product on an elevated surface (e.g. a table).
- Always use the restraint system.
- To avoid injury ensure that children are kept away when unfolding and folding this product.
- Do not let children play with this product.
- Do not move or lift this product with the baby inside it’ If the infant swing has loudspeakers connected to external sound generating devices (e.g. personal music players)
- When the product is connected to a music player, ensure that the volume of the music player is set.
- This product does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.
- Do not use the product if any components are broken or missing.
- Do not use accessories or replacement parts other than those approved by the manufacturer.
- SUFFOCATION HAZARDS: Young infants have limited head and neck control. If the seat is too upright, infant’s head can drop forward and compress the airway. ALWAYS keep swing seat fully reclined until infant is at least 4 months old AND can hold up head without help.
Product Introduction
Product Specification:
| Product Name | Auto Baby Swing |
|---|---|
| Model Number | B8701K |
| Input Voltage | l00-240V~ |
| Output Voltage | SV |
| Output Current | lA |
| Frequency | S0/60Hz |
| Application | Children up to a weight of9 kg or unable to sit up unaided |
| Main Material | 100% polyester fiber, strong iron base bracket |
Product Features:
- Swinging from side to side, with five gears mimicking human movement.
- Protecting baby’s spine design on the basis of human engineering.
- Power supplied by safe SV low voltage adapter.
- One-button installation and disassembly, simple and convenient to use.
- Seat cover made of environmental-friendly super soft fabric and non-textile, cozy, breathable and safe & removable and machine washable seat fabric.
- Made of strong iron base bracket with light weight and strong hardness guaranteeing safety for baby.
- Controlled by touching screen or remote controller, easy to operate
- With motion lock and safety belt for protection.
- With built-in soft nature sounds & Bluetooth enabled for music.
Parts Instruction
Make sure that all of the following parts listed are included in the box. If any part is missing, please contact us before operating. No tools are required for assembly.
- Plush toy*2
- Pillow*l
- Mosquito net with canopy*l
- Seat cover
- Remote controller
- Adaptorl, 2 meters of USB cablel
- Seat frame*l
- Base bracket*l
Motion Lock
Push the motion lock down to lock the seat frame and stop movement. Pull the
motion lock up to unlock the seat frame and the baby swing will swing again.
Remote Control
- Power on/off
- Time setting
- Built-in music/ Bluetooth music
- Volume up
- Five swing gears
- Sleep mode: press to enter sleep mode/gear 2 with timer 15 minutes
- Stop swing: press to stop swing, and press any gear key to resume swing.
- Play/pause
- Previous song
- Next song
- Volume down
Power Supply
- DC plug can be inserted into l00-240V ~ 50 / 60Hz AC power supply.
- Adapter output parameters: voltage is 5V and current is lA.
WARNING
- The power terminals must not be short-circuited.
- Do not use adapters other than those supplied with this product to power the product.
- Keep children away from working adapter.
- Check the adapter cable connection regularly.
User Instruction
Button Description
- Power On/Off Key
- Music Play/Pause Key
- Music Switch & Volume Up/Down Key
- Five Swing gears
- Timer setting,3 preset option
Button instruction
Power On/Off Key: Touch this button and the indicator light is on.Touch
it again to turn the swing off.
Swing Gear Setting: Touch the button to adjust swing settings. There are
five gears of the swing. the swinging angle is:0x-0°, 1 x-18° ,2x-21 ° ,3x-23°
,4x-25°, 5x-31 °, the swing angle will be smaller after loading
Note:
- When gear 0 under no timer setting. the gear indicator light and timer light are both on;
- Automatically back to Gear 0 when inspected unusual swinging or strike by something.
Timer Setting: Touch the button 1-3 times to choose the swing time.
8/15/30minutes.
Music Play: Touch the button to play the built-in music.Touch it again to
turn the sound off.
Volume Up/Down:
Touch the button in 1 second to adjust the volume, Touch the button in 2-3
second to play next song.
Open the Bluetooth connection of the mobile phone to “BT _BABY”, and the song
can be played directly after the connection is successful.
Installation
For Base Bracket
Assembling: Put the frame in the base with “ ” shape components aligned .
Disassembling: Pull out of the sheet metal and pull up the seat frame.
For Pillow and Seat Cover
Installation: Put the seat cover on the seat frame and fasten the snap
button on the back. Attach the pillow to the top retaining ring of the seat
frame and press the Velcro of the pillow.
Removing: Pull off the Velcro to detach the pillow and unfasten the snap
button to remove the seat cover .
For Canopy With Toys
Installation: Attach the toys on canopy and fasten the clasps to the pipe
of the seat frame, and attach mosquito net to the bottom of the seat frame.
Dismantling: Put out of the clasps to remove the canopy.
Safety Belt Instruction
Place the baby into the swing and let his legs across both sides of the crotch
support restraint, then turn the crotch support cover up. Adjust the seat belt
on both sides and buckle up.
Note: Be sure to use the safety belt correctly when your baby lie on the
baby swing for the safety of your child. Buckle off when you take your baby
out of swing.
Adjustable Backrest Guidance
Detach backrest Press buttons on left and right side and press down to detach
Adjustable backrest:
Hold two side steel tube, lift up to adjust recline of the backrest
Cautions: Infants and children are not allowed to stay in the swing during the above operation Above picture is for assembly installation only, product please refer to the actual.
Assemble Instructions
- Insert left and right tube into main engine. ensure that the foot tube is aligned with the screw hole of the main engine in the bottom.
- Fix 4 screws into the foot tube.
warning:
Guardian should take good care of your child. prohibit to play accessories and
avoid to get hurt or swallow.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>