QINGDAO MWH633B WiFi Module User Manual

Table of Contents

Specifications
- Model: MWH633B
- Product Name: WiFi Module
- Interface: USB2.0
- Supply Voltage: Requires voltage supplied by the system through a voltage regulator or circuit
- Dimension: 45mm x 35mm x 7.33mm
- Operating Temperature: Not specified
- Storage Temperature: Not specified

Installation
- To install the WiFi module, follow these steps:
- Pass the large round hole of the module through the limit column of the bracket on the TV.
- Fix the module by snap-fitting it onto the bracket securely.
- Connect the external IPEX antenna to the antenna pedestal of the module.
Power Supply
- The module requires a stable voltage supply from the system.
- Ensure proper connection to a voltage regulator or circuit to provide the necessary power.
RF Output Power
- The WiFi module operates within the following RF output power specifications:
- Band: WLAN
- Limited Power: 2400MHz – 2483.5MHz

Q: What should I do if the WiFi module is not connecting to my TV’s network?
- A: If you are experiencing connectivity issues, please check the following:
- Ensure the module is correctly installed on the TV bracket.
- Verify that the external antenna is securely connected to the module.
- Check the power supply to the module from the system.
- If issues persist, consult the user manual for troubleshooting steps or contact customer support.

The product description

The user can achieve TV connection WIFI net, through this module and the voltage supplied by the system to the module needs to be transmitted by a voltage regulator or circuit

The module installation method is as follows:

Pass the large round hole of the module through the limit column of the bracket of the TV, and fix the module by the snap-fit on the bracket.
Connect the external IPEX antenna to the antenna pedestal of the module

RF output power

| Band| Limited power
---|---|---
WlAN| 2400MHZ-2483.5MHZ| <20dBm
5150-5350 MHz, 5470-5850MHz
BT| 2400MHz-2483.5MHz|

The display method of Model approved code

Radiation Exposure Statement

This equipment complies with radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of RF Rules.
This equipment should be installed and operated with a minimum distance of 20 in (50cm) between the radiator and your body.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter

CAUTION:

To comply with the limits of the Class B digital device under Part 15 of the Rules, this device is compliant with Class B limits.
All peripherals must be shielded and grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to radio or reception

MODIFICATION

To assure continued compliance, Any changes or modifications not expressly approved by the grantee of this device could void the users’ authority to operate the device.

6. Radiation Exposure Statement

This equipment complies with radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 50 cm(8 in )between the radiator and your body NOTE To satisfy exterior labeling requirements, the following text must be placed on the exterior of the end product Contains Transmitter module To satisfy IESD exterior labeling requirements, the following text must be placed on the exterior of the end product ” Contains Transmitter module.
This symbol on the product or its packaging indicates that this product must not be disposed of with your household waste.
Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
The device is restricted to indoor use only when operating in the 2400 to 2483.5 MHz、5150 to 5350 MHz、5470 to 5850MHz frequency range.

RSS-GEN 8.4 User Manual Notice

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: