AONI E97 Smart Wireless Floodlight Camera User Guide

E97 Smart Wireless Floodlight Camera

“`html

Specifications:

• Model: E97P
• 1800 Lm Floodlight
• USB interface
• Micro SD Card Slot
• Speaker
• Microphone
• PIR Motion Detector
• LED Indicator

Product Usage Instructions:

1. Shut off power at the breaker:

If you are unsure about how to turn off power to your floodlight
circuit, consult with a licensed electrician. Always disconnect
power before installation to avoid electrical shock.

2. Proper Installation Height:

The recommended installation height for optimal motion sensor
performance is around 2.5m (8ft). Ensure the motion detection zone
covers up to 10m (32ft).

3. Installation Process:

– Connect Floodlight Camera cables to the junction box cables
with the corresponding colors.

– Use the included screws, waterproof cushion, light lock
collar, and silicone cap for secure installation.

4. Prepare for Installation:

Loosen the knobs on the light fixtures to adjust the camera
angle as needed for your specific setup.

5. Restore Power:

After completing the installation, restore power at the breaker.
The lights will turn on, and the Floodlight Camera will enter setup
mode.

6. Connection Preparation:

– Install the Floodlight Camera within a WiFi-covered area for
optimal performance.

– Ensure your smartphone is connected to the same 2.4G Wi-Fi
network that the camera will be using.

FAQ:

Q: What should I do if I encounter issues during

installation?

A: If you face any challenges during installation or setup,
please refer to the troubleshooting section in the user manual or
contact our customer support for assistance.

Q: Can I use the Floodlight Camera with a dimmer switch or

timer?

A: No, it is not recommended to connect this light fixture to a
dimmer switch or timer. Follow the specified installation
guidelines for optimal performance and safety.

“`

Smart Wireless Floodlight Camera Quick Start Guide
Model: E97P

Welcome
Thank you for choosing our Floodlight Camera. Getting started is easy.
1. What’s Included
American Version

Floodlight Camera Bracket Screw

Bracket Screws

Wire Nuts

Silicone Cap

Bracket Screw

Wire Nuts

Smart Wireless Floodlight Camera Quick Start Guide
Model: E97P

Waterproof Cushion

Quick Start Guide
01 Floodlight Camera

Europe/Australia Version

Floodlight Camera

Wall Screws

Bracket Screw

Screw stopper

02 Floodlight Camera

Junction Box Waterproof Cushion

Silicone Cap
Smart Wireless Floodlight Camera Quick Start Guide
Model: E97P
Quick Start Guide

2. Product Details
Light Adjustment Knob Camera Lock Collar Reset
USB interface Micro SD Card Slot

1800 Lm Floodlight

Speaker

Light Lock Collar LED Indicator Microphone Lens PIR Motion Detector
03 Floodlight Camera

3. Shut power off at the breaker

If you don’t know where your breaker is or how to turn off power to your floodlight circuit, consult with a licensed electrician.

WARNING
LIVE WIRES
KEEP OUT

WARNING: Risk of electrical shock Disconnect power at the fuse or circuit breaker before installing.
Verify that the supply voltage is correct. Connect fixture to a AC100V-240V, 50/60 Hz power source.

Properly ground fixture. Always follow code standards when installing wired connections. If you are outside of North America, installation and wiring must be performed by a licensed electrcian.
CAUTION: Risk of fire Do not install near combustible or flamable surfaces.

NOTICE Do not connect this light fixture to a dimmer switch or timer. Floodlight Camera must be installed on a wall and on a UL listed junction box.
04 Floodlight Camera

4.Proper Installation Height
The proper installation height to optimize the motion sensor performance is around 2.5m (8ft)

Motion Detection Zone
UP to 10m(32ft)

1m(3.28ft) 2.5m(8ft)

05 Floodlight Camera

5. How it fits all together
American gauge power cord colorBlack , White, Yellow green. Connect Floodlight Camera cables with same color junction box cables.

Junction Box Bracket (not included) Screws

Waterproof Cushion

Light Lock Collar

Light Adjustment Knob

Wire Nuts
06 Floodlight Camera

white

Black

Camera Lock Collar

Silicone Cap Motion Detector

Europe/Australia gauge power cord colorBlue , Brown, Yellow green. Connect Floodlight Camera cables with same color junction box cables.

Junction Box (not included)

Silicone Cap

Waterproof Cushion

Light Lock Collar

Light Adjustment Knob

Blue

Brown

Camera Lock Collar

Silicone Cap Motion Detector
07 Floodlight Camera

6. Prepare your Floodlight Camera for installation
Loosen the knobs on the light
1 fixtures to rotate them out of the way and allow access to the mounting screws.
2 According to your actual scene to adjust the view angle of camera
08 Floodlight Camera

7. Restore power at the breaker
After restoring power, the lights will turn on and your Floodlight Camera will begin speaking to you to let you known it’s in setup mode.
8.Connection Preparation
Please install the Floodlight Camera within WiFi covered area to ensure the best working performance.

Router

Camera

(Suggest 30cm~100cm)

Smartphone

Note: Make sure smart phone is connected with your wireless router. Please note the camera is only working under 2.4G Wi-Fi, not support 5G Wi-Fi.

09 Floodlight Camera

Smartphone ( IOS 9.0 or Android 4.4 system and higher version is available. Tablet PC, Mac or Windows PC is not available. Please don’t use special characters,symbols to name the WiFi and its Password.
9. Get the APP and Account
For the best experience, please download the `TuyaSmart’ APP to your smartphone from App Store or Google Play Store, or you can also scan the QR code below, the APP icon will be displayed after installed successfully.
10 Floodlight Camera

Launch the app from your smartphone and click to register and then sign in. Follow the on-screen instructions.
10.Connect the power to the camera
After installation, switch on the button.
11 Floodlight Camera

11. Set up your camera
Power the device on and make sure the indicator is red and flashing quickly or a prompt tone is heard. If the indicator is not red and flashing quickly, use the reset button to press the reset button of camera above 5 seconds, then release the button, a red LED on the front of camera will blink quickly. Follow App’s instructions to complete network pairing process, the device will connect to your Wi-Fi network successfully. The blue light is on, camera is ready for viewing.
Press the Reset button for above 5 seconds to start Reset processing
Red light blinks
12 Floodlight Camera

11. Micro SD card
To ensure SD card video recording works steady, we recommend Class 10 or higher speed Micro SD card. To make sure the device works normally, please format the SD card to FAT32 before the first time use. Before insert or pull out the SD card, please power off the device. Insert the SD card properly into the slot as below.
Micro SD
13 Floodlight Camera

12. APP Details
Listen Screenshot Local Video
14 Floodlight Camera

Sceenshot

Photos saved in mobile phone

Settings

Talk and Listen

Resolution change Full screen

Record Local video Lamp

If need two way audio, please set in “Settings”-“Basic function settings”
Video saved in mobile phone
Video recorded for motion or full time
Switch on/off lamp manually

Record Talk
Lamp alarm

Alarm

Switch for motion detection

Motion

PIR motion zone settings

AlarmMotionLamp

After setting alarm and motion zone, lamp can be triggered to turn on automatically if camera is in night vision mode

Buzzer

Enable manually. Can’t be triggered automatically

You’re done!
Congratulations! Your camera is set up and ready to go.
15 Floodlight Camera

Appendix: Camera LED Guide

NO.

LED Status

1

Red LED on

2

Red LED blinks

3

Blue LED blinks

4

Blue LED on

Camera Status System starting up Standby for configuration Network pairing Camera online

All trademarks are used for reference purposes only.
Thanks again for choosing our Floodlight camera! Make life safe in your hands! Boost security mobility in your smartphone!
16 Floodlight Camera

FAQ:
1. Can’t find SD card? First we suggest these famous and popular brands, like Samsung, SanDisk, Kingston etc. with at least class 10. Second, please format them to FAT32, this is the only format that camera can support.
2. Floodlight can not turn on automatically? We designed to be triggered only at night.Before that,please make sure “Alarm” and “Motion” are setted well. Please also make sure the IR LED turned on, means the video are black and white.
3. Buzzer can not turn on automatically? Buzzer are designed to turn on manually to avoid disturbing your neighbors.
4. Two way audio are not working? Please select “Two-way talk” first in “Settings-Basic function settings”
5. You can not get the video for a long time? Please first make sure this camera are installed as close as your router.Cameras are not suggested to install seperated with router for two thick walls. Please test your network and make sure it works well.
For more questions, please send from the APP “Settings”-“FAQ&Feedback”
17 Floodlight Camera

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>