aoni R30 Dash Camera User Manual
- June 4, 2024
- aoni
Table of Contents
CamCasle
User Manual
Thank you for purchasing CamCasle R30.
Introduction
Thank you for purchasing CamCasle products. Please read this instruction
manual carefully before use and keep it for your convenience.
If you have any questions or comments, please contact us via our official
email address:
The followings are the precautions for using the dash cam:
support@camcasle.com.
- This product only supports chargers with 5V voltage, otherwise, the machine may be damaged.
- Insert or unplug the Micro SD card in the off state. Otherwise, it will cause abnormal or damage to the device.
- Please use the high-speed Micro SD card that meets SDHC specifications and with the brand logo.
- Please use the 16GB-256GB Micro SD card.
- Video files may be lost or damaged if the Micro SD card is removed during recording.
- Video files may be lost or damaged if the camera is dropped or crashed.
- Micro SD card must be installed correctly to ensure proper function and video recording.
- Please use the original accessories, and do not disassemble the product.
- Please abide by the relevant national laws and regulations, and do not use this product for any illegal purposes.
- If you have any questions or need more support with the product, please contact our after-sales staff.
Package Contents
[A] R30 Front Camera1
[B] R30 Rear Camera1
[C] R30 Rear Camera Cable(6M)1
[D] 3M Adhesive Base 1 (Mounted On The Dash Cam)
[E] R30 Front Camera USB Data Cable 1
[F] CamCasle R30 User Manual 1
[G] Car Charger 1
[H]Static Sticker 2
Operation Instruction
1. Camera Overview
1)Power Button;
2)Backward/Emergency Recording;
3)Emergency Shot/Upward;
4)Recording/Play Back/Downward;
5)System Setting/Delete;
6)Front Camera Lens;
7)Micro SD Card Slot;| 8)Front Adhesive Base;
9)USB-C Charging Port;
10)LED Indicator;
11)Heat Diffuser Holes;
12)Microphone;
13)Speaker;
---|---
Rear Camera
- Mini USB Charing Port;
- Rear Camera Lens;
- Adhesive Base
| Button| Functions
---|---|---
1| Power| Recording Status: Short press to switch display modes
Other Status: Long press to turn the device on/off
2| Emergency Recording Backward| Recording Status: Record a video manually in
an emergency
Setting Status: Switch back to the previous page
3| Emergency Shot Upward| Recording Status: Take a photo manually in an
emergency Setting Status: Switch back to the previous page
Photos Playback Status: Switch to the previous photo Videos Playback Status:
Short press to pause/play the video
4| Voice Pickup Playback Downward| Recording Status: Long press to turn on/off
the microphone; Short press to enter the playback status
Setting Status: Short press to move downward
Playback Status: Short press to switch to the next video/photo
5| Setting Delete| Recording Status: Short press to enter the setting status
Playback Status: Delete
Other Status: Confirm/Function
Tips: Short Press: Less than 1s; Long Press: Longer than 3s
Product Installation
- Insert the Micro SD Card
Insert the Micro SD card as shown in the picture until it clicks. (The Micro SD card maximum supports up to 256GB.)
-
Remove the Micro SD card
Press the Micro SD card inward and remove it from the slot. -
Use of the Micro SD Card
a. Please check the insertion direction of the Micro SD card, incorrect insertion direction may damage the camera and Micro SD card.
b. Please use a high-speed Micro SD card that meets SDHC specifications; a high-speed Micro SD card will have the Class 10 logo.
c. For your better experience, we recommend you format the SD card before you start using it.
Steps to format:
- use the card reader and format the SD card on the computer. (you can repeat the format several times)
- insert the SD card into the R30 dash cam and format it again in the APP page.
d. Please note that the SD card is a consumable product, and its service life decreases with the number of times that the data is read. It is recommended that you replace the SD card regularly.
e. In order to extend the service life of the SD card, you can format the SD card once every two weeks. Do not plug and unplug the SD card frequently, which will cause damage to the SD card.
f. Please make sure to insert and remove the SD card when the power is off.
g. It is recommended to use a 16GB-256GB SD card.
2.2 Dash Cam Installation
-
Wipe the place that needs to be installed and ensure the window is clean.
-
Stick the static sticker near the top of the car windshield.
-
Insert the SD card and USB Cable C port in the R30 Front camera.
-
Remove the 3M adhesive film from the base, and stick the dash cam in the dotted box of the static sticker.
● Rotate the R30 Front camera to adjust the angle of the lens. It is recommended to adjust the lens slightly downward to ensure that the camera’s view is parallel to the horizontal ground. (Suggestion: the ground/sky ratio is approximately 6:4.) -
Plug the end of the R30 Front camera USB cable into the car charger, and insert the car charger into the cigarette lighter.
-
After the R30 Front camera is installed and connected to the power supply, the recorder automatically turns on and records video, and the LED indicator lights up, indicating that it enters working condition.
-
Rear Camera Installation
- Select an installation location like the windscreen and wipe it with a dry cloth.
- Power off the R30 Rear camera and connect the cable to the front camera.
- Peel the protection film off the sticky pad and camera lens. 4) Fix the rear camera on the selected location.
LED Indicator Description
LED Indicator Status | Status Description |
---|---|
Light out | OFF |
Red Light Always On | Powered on (Not recording) |
Red Light Flashing | Recording In Progress |
APP Connection
-
Scan the QR code to download the “CamCasle” APP.
-
Make sure the dash cam is powered on.
-
Open the “CamCasle” APP, and click “connect DVR” on the page of the APP.
-
Enter the WiFi setting page.
-
Select the WiFi name “CamCasle-R30-XXXX” in the WiFi list to connect (default password: 12345678).
-
Change the password: Enter the new password and click OK. After the password is changed, reconnect the dash cam and manually with a new password.
(Please take a screenshot to save your updated password, changing the password
is not recommended.)
Attention
The dash cam WiFi is an APP hotspot that provides a wireless connection to the
device for access only. The camera does not have networking capabilities. The
smartphone will not actively select the dash cam’s WiFi for connection. If the
WiFi is disconnected, please re-connect it again.
Special Note
The “CamCasle” App is produced by CamCasle and is part of CamCasle products.
If you have any questions or comments about the use of the app, please feel
free to contact us via our official email
address:support@camcasle.com. Thank you for
your support to CamCasle.
APP Introduction
- APP Main Interface Introduction
1.1 Settings
-
Map
The driving tracks can be viewed on the map. -
Auto Connected Recorder ON/OFF (Default: ON)
With a WiFi connection, the APP can connect to the device. -
APP Language English
. The APP includes more than 20 languages. (Default: Mobile System Language)
The operation pages of the APP display the language you have selected. -
Help
The Common Q&A for Dash Camera. If you have any questions, please send them to our official email address (support@camcasle.com), we have professional technical support and a customer service team at your service. -
Clear
Cache Displays the current cached data capacity of the APP and can be cleared. (Attention: the cache refers to the data such as video thumbnails, not including the videos on the SD card) -
About
CamCasle APP Version Information. If you want to upgrade your app, you can go to the app store or contact us to download it.
1.2 View & Delete the Connection Records
Long press to view the WiFi information of the dash cam connected by the
CamCasle APP. Swipe to the left to delete the connection records.
1.3 DVR
Click “Enter DVR” to connect to the R30 dash cam. 1.4 “+”
-
Photo Share
Share the photos on social media platforms. -
Video Share
Capture a 10-second video to share. (Only support 10-second video)
Attention
If you need to share the full video, download the video file to your own mobile album, and then share it through your mobile album. -
Track List
Share the driving tracks and map information to social media platforms.
Attention
You can refer to User Manual 3.5 for the specific sharing process.
1.5 Local Album
-
Loop
In the APP file, the dash cam records regular video. -
Event
In the APP file, the dash cam records an emergency video. (locked video) -
Photo
In the APP file, the dash cam shows the taken photos.
Note
Need to download the files from the SD card to APP, please refer to User Manual 3.2
2. APP Function Introduction (After Connecting)
2.1 Icon Function Introduction
NO. | Name | Description |
---|---|---|
1 | Settings | Dash cam settings |
2 | Disconnection | Disconnect from dash cam |
3 | 10-Second Video | Record a 10-second video |
4 | Photo Shoot | Take a picture |
5 | Album | View files stored on the SD card |
6 | Road Condition Monitoring | Monitor the map to show real-time road |
conditions
7| Action Track| Record location change tracks
8| Mop Full Screen| Display full-screen map
9| Location| Keep the current location centered on the page
2.2 Disconnect
Click to disconnect the CamCasle APP from the dash cam.
2.3 Dash Cam Settings
- Settings(Click the settings icon to enter this page)
a. Resolution
Selectable recording resolution: 1080P 30FPS / 720P 30FPS. (Default: 1080P 30FPS)
b. Looping Video
This function determines the recording length of each video, select from: 1 Minute / 3 Minutes / 5 Minutes. (Default: 3 minutes)
c. Record Audio
Select this function, and start recording. When turned off, stop recording. (Default: ON)
d. Volume
This function determines the volume level of voice prompts. Select from four settings : OFF / Low / Medium / High. (Default: Medium)
e. WDR
This function reduces the brightness difference of the recorded screen and adjusts the over-bright and over-dark areas, so the video effect will be clearer. (Default: ON)
f. Light Frequency
Default Frequency 50 Hz.
g. Time Setting
This function displays the current recording time.
h. EV Setting
This function can change the EV value of the dash cam. The adjustment range is from 2 to -2. If the brightness is too high, it is recommended to lower the EV value.
(Default: 0)
i. Stamp Setup
Turn on this function, the recorded video shows a watermark. (Default: ON)
j. Format TF Card
Click to delete all the files in the SD card. Note: Files cannot be recovered after formatting. Please download and save important files in advance.
Related Information:
TF Card Available Space
Check the remaining capacity of the SD card.
Version
Check the version information of the dash cam.
k. Camera Settings Reset
Click to restore the dash cam system settings to the factory state. All settings will be restored to their default values.
Main Function Description
1. Collision Detection
- Turn on collision sensitivity (off, low, medium, high switchable), and the default is Medium.
- When vibration or collision detection is triggered during driving, the dash cam will lock the current video into the emergency folder, the locked file will not be overwritten, so important events will be saved and can be used as evidence.
- The locked files will be saved in the emergency folder, which will automatically overwrite the earliest locked files when that folder is full. When the “Emergency Files” folder accumulates to 40% of the card capacity, the camera will overwrite the earliest video.
Attention
Please transfer important videos to your PC or other storage location (e.g. external hard drive) regularly. To maintain good read performance, the Micro SD card should be formatted every 1-2 weeks.
2. Seamless Recording
There will be no time interval between each two consecutive recorded videos.
If the loop recording length is selected as 1 minute, then the recorded video
periods, for example, will be 06:00:00-06:01:00, 06:01:00-06:02:00, and
06:02:00-06:03:00.
Download and Share Photos & Videos
3.1View Files on the Micro SD Card
Click “Enter DVR” to enter this page. Continue to click the icon of the
picture below to view photos and videos.
3.2 Save Files from the Micro SD Card to APP’s Local Album
Select from Loop/Event/ Photo files that you want to share in the SD card
file, click download, and the file can be saved to APP’s local album.
3.3 Share APP Files
Click the icon in the picture to share photos or 10-second video clips.
Crop Video (10s)
Edit Video (10s)
Share Video (10s)
3.4 Save App Files to Your Phone Album
Directly save the photos or videos to your phone album.
3.5 Share Videos from Your Phone Album
Share the photos and videos in your phone album.
Attention
The Wi-Fi of the car recorder has no networking function, if you need to
access the Internet, please switch the network.
Warranty
The R30 is covered by a 1-year manufacturer warranty. For more information,
please visit www.camcasle.com
Specifications
Main Processor | NT96670 |
---|---|
Sensor(Front Camera) | Sony IMX415 |
Sensor(Rear Camera) | GC2053 |
Aperture(Front Camera) | F1.75 |
Aperture(Rear Camera) | F2.2 |
Viewing Angle(Front Camera) | 140 degree |
Viewing Angle(Rear Camera) | 140 degree |
Video Resolution(Front Camera) | 2160p |
Video Resolution(Rear Camera) | 1080P |
Display(Front Camera) | L960 * W 376mm(3.16inch) |
Photo Format | JPEG |
Video Format | MP4 |
Video Codec | H.264 |
Micro SD Maximum Support | 256GB |
Mic | Built-in Microphone |
Speaker | Built-in Speaker |
Light Source Frequency | Default 50HZ |
G-Sensor | Built-in G-Sensor |
GPS Module | √ |
Automatic Recording | √ |
Collision Detection | √ |
Date and Time Stamp | √ |
Emergency File Protection | √ |
Seamless Loop Recording | √ |
APP Control | √ |
Power Supply | 5V/2.4A |
Operating Temperature | -10°C ~ 60°C / 14°F~140°F |
Storage Temperature | -20°C ~ 70°C / -4°F~158°F |
Device model | R30 |
FAQ
Failure | Cause | Solution |
---|---|---|
Unable to Loop Video | Check if the Micro SD card is full | Connect the APP and |
format the Micro SD card (back up the last video and picture before
formatting)
Screen Stuttering| Micro SD card does not match| Check if the Micro SD card is
a high-speed card with Class 10 rate and if the capacity is not less than
16GB.
Unable to Take Pictures or Videos| Check if the Micro SD card is full| Connect
to APP and format the Micro SD card (back up the last video and picture before
formatting)
Stop Autocratically When Recording| HD video data is huge, SD card is not
suitable| Use SDHC compatible high-speed Micro SD card, high-speed micro SD
card will have a C10 logo.
Prompt “File Error”| An error occurred when storing data on the Micro SD card,
resulting in incompatible files| Connect the APP and format the Micro SD card.
Foggy Image| The lens is stained| Wipe the lens clean.
Other reasons| Please contact after-sales service.
Downtime| Downtime| Short press the reset button to restart.
WARRANTY CARD
ATTENTION:
- Please read the return procedures and warranty policy carefully on www.camcasle.com before sending items back to point-of-purchase.
- Please fill out the card and send it to your reseller together with the product if your product’s warranty is valid.
S.N:|
---|---
Date of Purchase:|
Product Model:|
RMA Number:|
Return Reason:|
Customer Name:|
TEL:|
E-mail:|
Address:|
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
a minimum distance of 20cm between the radiator & body.
CamCasel
For more information, please visit our official website
www.camcasle.com
Your valuable comments and suggestions on improving
CamCasle products are welcome!
**support@camcasle.com
sales@camcasle.com
****www.camcasle.com**
Documents / Resources
| aoni
R30 Dash
Camera
[pdf] User Manual
CAMCASLER30, Z63CAMCASLER30, R30 Dash Camera, R30, Dash Camera, Camera
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>