WOLFBOX D07S 4K Dash Camera for Cars with WiFi GPS User Guide
- June 9, 2024
- WOLFBOX
Table of Contents
WOLFBOX D07S 4K Dash Camera for Cars with WiFi GPS3
Product Information
The product is a dash cam with various features such as G-sensor trigger recording, time-lapse recording, and parking monitoring mode. The dash cam has an accompanying mobile app called Wolfbox that allows users to connect and control the device settings. The dash cam supports SD cards with a capacity of 16GB-128GB and a speed of at least Class 10. The parking monitoring mode requires a hardwire kit that is available upon request.
Product Usage
- Download the Wolfbox app by scanning the QR code on the right-hand side of the user manual.
- Before first use, format the SD card in the camera to prevent any errors and ensure smooth operations.
- Select an SD card with a capacity of 16GB-128GB and at least Class 10 speed.
- To connect the app to the dashcam, follow these steps:
- Turn on the D07S dash cam.
- Download and open the Wolfbox app.
- Add the dash cam to the app.
- Enter “12345678” as the WLAN connect password.
- For Android phones, allow any prompts that appear when connecting to the dash cam via WiFi.
- For iPhones, tap “ALLOW” or “OK” if prompted while using the WiFi feature.
- To enable parking monitoring mode, follow these steps:
- Obtain the hardwire kit from customer service or use a 32GB SD card.
- Connect the hardwire kit to the dash cam.
- After turning off the car engine, the camera will turn off automatically and prompt “ACC OFF”.
- The dash cam will enter G-sensor trigger mode or time-lapse recording mode when there is a collision or vibration detected.
- The video file will be locked for future reference.
- If you encounter any problems with installation or usage, contact customer service through WhatsApp, LINE, email, or phone.
Warm Tips
- All system setting is on the mobile app, you could install it from the QR code right-hand side to download the Wolfbox app.
- Before first time use, please FORMAT the memory of the SD card in the camera to prevent any errors and for smooth operations.
- Please choose SD card with 16GB-128GB and a speed of at least Class 10.
- Since we consider that some customers have no need of the parking monitoring mode, we put the hardwire kit or 32GB SD card in the user manual in the form of an easter egg. (You can also refer to this line of words to contact us to get free hardwire kit or 32GB SD card)
Main Function
- 4K UHD dash camera for cars can record up to 3840*2160P/30fps video.
- With Built-in WiFi and APP control, you can directly download the recorded 4K video to your smartphone and share it on social media or with your family and friends.
- Loop Recording: 1/3/5min, when the memory card is full, it will automatically overwrite the oldest video.
- G-Sensor, when the driving recorder detects that the vibration or collision reaches the sensing level of the G-Sensor, it will automatically start recording a locked video for 1 minute.
APP Connection Instruction
For Android Phone
Please choose to allow when these prompts appear.
For IPhone
If you get this pop-up for your iPhone while using the WiFi feature, make sure
to tap on”ALLOW” or”OK”
APP & WIFI cannot connect
- Please check whether the connected WiFi name is the same as the dash cam’s WiFi name, and whether the password is entered correctly.
- Please try to restart the dash cam and APP, you can delete or forget the network and try to connect again.
- Since the mobile phone system has intelligent management behavior for all networks, please try to temporarily turn off the mobile network before connecting.
- Since the WiFi of the dash cam does not have the function of surfing the Internet, the mobile phone system may prompt you to switch to the network with Internet access after the connection is successful. In this case, please authorize to keep the current WiFi connection status of the dash cam, otherwise the connection will be disconnected.
- Please make sure that the WiFi of the dash cam is connected or is being connected by other mobile phones. At the same time, the WiFi of the dash cam only allows one mobile phone to connect.
If you still can’t connect, please submit feedback on the APP and contact us.
Parking Mode hardware kit needed
-
G-Sensor Trigger Record
After the car engine is off, the camera will turn off automatically, and prompt “ACC OFF, Then enter G-sensor trigger mode” on the screen. The camera will turn on and start recording automatically when there’s a collision or vibration detected and the video file will be locked. -
Time-lapse 12H/24H/48H
After the car engine is off, the camera will turn off automatically, and prompt”ACC OFF, Then enter time-lapse rec mode” on the screen. If you turn the G-Sensor among Low, Medium, and High, the parking video will be locked when there’s a collision or vibration detected.
Customer Service
If you have any problems installing or using the dash cam, please feel free to contact us.
-
Website:
www.wolfbox.com -
E-mail:
Customer Phone Number
+1 888 296 8399
Business Day:
Min-Fri
Business Time:
6 am-12 am, 1 pm-8 pm
EST(GMT-4)