V-TAC 10140 Linear Light LED Instruction Manual
- June 17, 2024
- V TAC
Table of Contents
V-TAC 10140 Linear Light LED Instruction Manual
TECHNICAL DATA
SKU| SHAPE| WATTS| LUMENS| CRI| DF| BEAM ANGLE| INPUT POWER| IP RATING|
DIMENSION
---|---|---|---|---|---|---|---|---|---
10140, 1014110142, 10143| X Connector| 12W| 1200Lm| >80| >0.9| 120°|
AC:220-240V 50/60 Hz| IP20| 181X181X58mm
10170,1017110172, 23002| T Connector| 10W| 1000 Lm| >80| >0.9| 120°|
AC:220-240V 50/60 Hz| IP20| 181×116.5x58mm
10173, 1017410175, 10176| L Connector| 8W| 800 Lm| >80| >0.9| 120°|
AC:220-240V 50/60 Hz| IP20| 116.5×116.5x58mm
INTRODUCTION &WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to surveyor at the best. The warranty is valid for 3 years from the date of purchase. The warranty doesn’t apply to damage caused by incorrect installation or abnormal wear and tear. The company givens warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution , risk of electric shock.
WARNING
- Peacemaker sure to turn off the power before starting the installation.
- Installation must be performed by qualified electrician.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
- For Indoor use only
INSTALLATION DIAGRAM
NOTE : When using the connector, kindly apply power source only from 1end.
L SHAPECONNECTING DIAGRAM
X SHAPECONNECTING DIAGRAM
T SHAPECONNECTING DIAGRAM
SPECIAL NOTE: When making a square formation, one of the connectors to
be used should be a dummy connector which is provided together with.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>