Acoustalay 300 Premium Underlay Vapour Barrier Instruction Manual
- March 8, 2024
- ACOUSTALAY
Table of Contents
Acoustalay 300 Premium Underlay Vapour Barrier Instruction Manual
FOR USE WITH LAMINATE AND ENGINEERED FLOORS
ACOUSTALAY® 300 should be used as an insulating/spot levelling layer between the floor to be laid and the sub-floor. Suitable for use with underfloor heating. Always read and follow the guidelines supplied with the underfloor heating system and/or floor to be fitted.
-
Ensure floor is clean and flat*. Unroll at 90º to the direction of the floor, covering area to be laid. To assist laying, apply double-sided tape to the perimeter of the sub-floor.
If laid on a concrete sub-floor so the ACOUSTALAY® is to be used as a vapour barrier, then the first row should be laid with a minimum of 20mm up the walls.
-
Butt the next row edge tightly to the first, ensuring that they do not overlap. Carefully tape the joints using a waterproof tape. All rows, including the last, should also be laid with a minimum of 20mm up the wall.
This will be concealed behind the new or refitted skirting, scotia/trim once the floor is laid.
-
Lay the flooring on top of the ACOUSTALAY® , referring to the manufacturer’s instructions.
CAUTION: ACOUSTALAY® is combustible and should not be exposed to flame or other sources of ignition. *A flat sub-floor means deviations of less than 2mm over 2.5m.
t. 1986
Engineering Underlay for rigid floors since 1995
“THE FIRST – THE BEST”
www.acoustalay.co.uk
Innovative underlay for rigid floors
EU ENTITY: Authorised Rep Compliance Ltd E.Mail:
info@arccompliance.com
MANUFACTURED BY: Beacons Products Ltd, Unit 10, EFI Industrial Estate,
Brecon Road,
Merthyr Tydfil, UNITED KINGDOM CF47 8RB
Telephone: +44 1685 350011
