VIGO VGT2046 Matte Stone Wisteria Composite Oval Vessel Bathroom Sink Instruction Manual
- May 15, 2024
- VIGO
Table of Contents
VIGO VGT2046 Matte Stone Wisteria Composite Oval Vessel Bathroom Sink
Instruction Manual
INSTALLATION MANUAL
MODEL NUMBER VG03030
VIGO Cass Single Hole Single-Handle Vessel Bathroom Faucet
REGISTER YOUR PRODUCT
In order to activate your warranty, you must register your product.
vigoindustries.com/register
ACTIVATE NOW
PRODUCT FEATURES
- PerformanceSpout: Eco-friendly 1.2 GPM and WaterSense certified spout conserves water without sacrificing performance.
- EternalSeal: Ceramic disc cartridge continually prevents leaks and drips for flawless water flow.
- FinishPlated: 7-layer coated finish ensures that the hardware finish is consistent throughout the product.
- Single-hole installation: 1, 2 or 3-hole installation with deck plate sold separately.
- Easy to install: All parts, hardware and user-friendly guide are included for DIY installation.
- ADA Compliant: Single handle lever ensures effortless operation of water temperature and pressure.
CERTIFICATE & WARRANTY
CUPC. NSF-61, NSF 372, AB1953, CEC, and WaterSense certified by IAPMO R&T
All VIGO Bathroom Faucets have a Limited Lifetime Warranty
PACKING LIST
- Faucet
- Supply Lines
- Allen Key
- Plumbers Tape
TOOLS
- Adjustable Wrench
- Eye Protection
- Safety Gloves
- Plumber’s Putty (Optional)
- Pipe Tape
- Flat Screwdrivers
QUESTION?
For installation help, missing or replacement parts, please contact our product specialist for consultation.
+1 866-591-7792 (Option 2) (9:30 am – 5:30 pm EST)
DIMENSIONS
PARTS LIST
INSTALLATION STEPS
Installation must be done by a qualified licensed plumber.
STEP 1.1
1.1) Preparation
1.1.1 Shut off water supply
1.1.2 Remove old faucet and flexible hoses
1.1.3 Clean sink surface in preparation for the new faucet
1.1.4 Flush water connection at home to make sure no debris is stuck in the
line
STEP 1.2
1.2) Connect Hoses
1.2.1 Apply plumbers tape to threads.
1.2.2 Connect flexible hoses to the brass pipes
STEP 1.3
1.3) Install New Faucet
1.3.1 Place new faucet in the position on the countertop
1.3.2 From under the countertop, put rubber washer, metal ring, brass nut on
to threaded pin
1.3.3 Tighten nut
STEP 1.4
1.4) Open the water lines
1.4.1 Wrap tape on cold and hot pipe threads
1.4.2 Place the hose
1.4.3 Screw the hoses onto cold and hot threads
1.4.4 Open cold and hot water lines
SHARE YOUR VIGO PRODUCT AND GET FEATURED!
We hope you love your new VIGO item as much as we do!
Feel free to leave a review on vigoindustries.com and don’t forget to share any photos on Instagram with #vigoindustries
The best renovations will be featured on blog.vigoindustries.com and @vigoindustries social media.
Share your VIGO product and tag
vigoindustries
for a chance to be featured.
vigoindustries
SAFETY TIPS
Installation must be done by a qualified licensed plumber. Prior to installation please read the instructions thoroughly, confirm that all parts are included and visually inspect the unit for any defects. If you have any questions please contact the VIGO Technical Support Department before proceeding with installation.
If you use soldering for the installation of the faucet, the seats, cartridges and washers will have to be removed before using flame. Damage caused by improper soldering will void the warranty. Protect your eyes with safety glasses when cutting or soldering water supply lines.
CLEANING RECOMMENDATION FOR VIGO PRODUCTS
Modern faucets and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning. Be sure to avoid using abrasive materials while cleaning VIGO products.
REGISTER YOUR PRODUCT
IN ORDER TO ACTIVATE YOUR WARRANTY
YOU MUST REGISTER YOUR PRODUCT
VIGOINDUSTRIES.COM/REGISTER/
CLEANING INSTRUCTIONS FOR FAUCETS AND SHOWERS
Please follow the instructions on your cleaning materials. In addition, pay attention to the following points:
- Clean the faucets and showers as needed and when required.
- The amount of cleaning product needed and the time the cleaner needs in order for effective cleaning to take place should be adjusted according to products; cleaning product should not be left on VIGO product longer than necessary.
- Clean regularly to prevent calcification.
- When using spray cleaner, spray first onto a cloth or sponge – never directly spray onto the sanitary tapware as drops could enter openings and gaps and cause damage.
- After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
- Recommended cleaning solution for hard water and soap scum is to use 50/50 water and vinegar solution.
CLEANING MATERIAL FOR FAUCETS AND SHOWERS
Acids are necessary ingredients of cleaning materials for removing lime, however, please pay attention to the following points when cleaning faucets and showers:
- Only use cleaning materials that are explicitly provided for this type of application.
- Never use cleaning materials that contain hydrochloric, formic or acetic acid, as they cause considerable damage.
- Phosphoric acid is also restricted as it can cause damage to the finish.
- Never mix any cleaning material with another.
- Never use cleaning materials that have an abrasive effect, such powdered and industrial cleansers, scouring pads or micro fiber cloths.
VIGO Product Support 866-591-7792 (Option 2) Monday – Friday 9:30am – 5:30pm EST
vigolnaustries.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>