SilverCloud YR300 Electric lock User Manual
- June 4, 2024
- SilverCloud
Table of Contents
SilverCloud YR300 Electric lock
FUNCTIONS
- It supports electrical control or hand operation.
- It is compatible with door phones or access control systems.
INSTALLATION
- Use the included screws to install the lock body, the cylinder, and the door holder. At least 5 mm installation distance from the lock body to the door holder is recommended.
- The cylinder should be mounted on the external side of the door using the included accessories. The axis of the cylinder must pass through the door up to the dedicated slot in the lock body (on the other side of the door). To open the lock, it is enough to turn the key in the cylinder.
- The spring can be adjusted according to the weight of the door.
- Use a 7 – 12 d.c. voltage and a power higher than 12 W to open the lock.
- By pushing the button, the electric lock unlocks after 1 second.
NOTES:
- The maximum continuous power supply time for unlocking the lock must not exceed 3 seconds. The lock is not dependent on polarity.
- For safety, please use powdery lubricant for the cylinder.
EXAMPLE OF INSTALLATION SCHEME
- Electric lock (PNI YR300, PNI YL500, PNI YE910)
- Access control keypad (eg. PNI DK220, PNI DK110)
- Switching power supply (eg. PNI ST3.4A)
- Access button (eg. PNI PB410)
NOTE: The lock installation must be performed by specialized personnel only.
RECOMMENDED COPPER WIRE
TECHNICAL DETAILS
References
Read User Manual Online (PDF format)
Loading......