VIGO VGT2067 Matte Stone Lotus Composite Round Vessel Bathroom Sink Instruction Manual

VIGO VGT2067 Matte Stone Lotus Composite Round Vessel Bathroom Sink

PRODUCT FEATURE

• Performance Spout: Eco-friendly 1.2 GPM and Water Sense certified spout conserves water without sacrificing performance.
• Eternal Seal: Ceramic disc cartridge continually prevents leaks and drips for flawless water flow.
• FinishPlated: 7-layer coated finish ensures that the hardware finish is consistent throughout the product.
• 3-hole installation: all parts, hardware and user-friendly instructions are included
• Easy to install: All parts, hardware and user-friendly guide are included for DIY installation.
• Eco-friendly: water efficient faucet conserves water and is environmentally friendly for all homes

CERTIFICATE & WARRANTY

cUPC, NSF-61, NSF 372, AB1953, CEC, and WaterSense certified by IAPMOR&T
All VIGO Bathroom Faucets have a Limited Lifetime Warranty

PACKING LIST

• Faucet
• Supply Lines
• Allen Key
• Plumbers Tape

TOOLS

• Adjustable Wrench
• Eye Protection
• Safety Gloves
• Plumber’s Putty (Optional)
• Pipe Tape
• Flat Screwdrivers

QUESTION?

For installation help, missing or replacement parts, please contact our product specialist for consultation.

+1 866-591-7792 (Option 2) (9:30am-5:30pm
sf@vigoindustries.com

RIGITER YOUR PRODUCT

In order to activate your warranty, you must register your product.

vigoindustries.com/register

ACTIVATE NOW

Share your VIGO product and tag
#vigoindustries
for a chance to be featured.

Vigo industries

V1GO Product Support 866-591-7792 (Option 2) Monday- Friday 9.30am – 5 30pm EST

Dimensions

FRONT VIEW

TOP VIEW

SIDE VIEW

MEASUREMENTS

Assembled depth| 7 1/o” (180mm)
Handle width| 2″ (51mm)
Faucet length| 9 %”(243mm)
Hole Diameter| 01 ¾” (35mm)
Water supply connection| 3/8″

SAFElY TIPS

Installation must be done by a qualified licensed plumber. Prior to installation please read the instructions thoroughly, confirm that all parts are included and visually inspect the unit for any defects. If you have any questions please contact the VIGO Technical Support Department before proceeding with installation.
If you use soldering for the installation of the faucet, the seats, cartridges and washers will have to be removed before using flame. Damage caused by improper soldering will void the warranty. Protect your eyes with safety glasses when cutting or soldering water supply lines.

Parts List

68091 Valve Housing
68185-H Spout Adapter Assembly (Hot)
68185-C Spout Adapter Assembly (Cold)
68182 Handle Escutcheon
68184-H Handle Assembly (Hot)
68184-C Handle Assembly (Cold)
68183 Spout Assembly
64042 Aerator Washer
64043 Aerator
68164 Outlet Sleeve

Installation Steps

Installation must be done by a qualified licensed plumber.

STEP 1.1

Preparation

1. Shut off water supply
2. Remove old faucet and flexible hoses
3. Clean sink surface in preparation for the new faucet
4. Flush water connection at home to make sure no debris is stuck in the line
   

STEP 1.2

1. Measurement & Placement
2. Draw a simple diagram on the wall to determine the exact location for the faucet ‘s placement.
   

STEP 1.3

1. Preparation & Connection
2. Use plumber’s tape around the threaded fitting to secure the seal.
3. Connect braided hoses to the proprietary brass fitting.
   

STEP 1.4

1. Wall Placement & Alignment
2. Finalize measurements, making sure the dimensions are correct and ready for the next steps.
   

STEP 1.5

1. Install New Faucet
2. Remove the protective tops covering the hardware below
   

STEP 1.6

1. Handles & Spout
2. Place the handles and spout firmly into position within their respective circular housings.
   

STEP 1.7

1. Sealed for Quality
2. Use plumber’s tape to cover the threaded fitting, guaranteeing an efficient and long-lasting seal.
   

STEP 1.8

1. Putting It Together
2. Attach the assembled handles and spout directly to the exposed valves.
   

STEP 1.9

1. Final Check
2. Make sure that all fittings and lines are properly connected and tightly fastened before turning on water valves.
   

STEP 1.10

1. Open the water lines
2. Wrap tape on cold and hot pipe threads
3. Place the hose
4. Screw the hoses onto cold and hot threads
5. Open cold and hot water lines
   

CLEANING RECOMMENDATION FOR VIGO PRODUCTS VIGO

Modern faucets and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and reclamations, it is necessary to consider certain criteria when cleaning. Be sure to avoid using abrasive materials while cleaning VIGO products.

REGISTER YOUR PRODUCT

ACTIVATE NOW
IN ORDER TO ACTIVATE YOUR WARRANTY YOU MUST REGISTER YOUR PRODUCT
VIGOINDUSTRIES.COM/REGISTER/

CLEANING INSTRUCTIONS FOR FAUCETS AND SHOWERS

Please follow the instructions on your cleaning materials. In addition, pay attention to the following points:

• Clean the faucets and showers as needed and when required.
• The amount of cleaning product needed and the time the cleaner needs in order for effective cleaning to take place should be adjusted according to products; cleaning product should not be left on VIGO product longer than necessary.
• Clean regularly to prevent calcification.
• When using spray cleaner, spray first onto a cloth or sponge – never directly spray onto the sanitary tapware as drops could enter openings and gaps and cause damage.
• After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
• Recommended cleaning solution for hard water and soap scum is to use 50/50 water and vinegar solution.

NEVER SPRAY DIRECTLY ONTAPWARE

SPRAY ONTO SPONGE/ CLOTH

CLEAN REGULARLY

RINSE THOROUGHLY WITH CLEAN WATER

CLEANING MATERIAL FOR FAUCETS AND SHOWERS

Acids are necessary ingredients of cleaning materials for removing lime, however, please pay attention to the following points when cleaning faucets and showers:

• Only use cleaning materials that are explicitly provided for this type of application.
• Never use cleaning materials that contain hydrochloric, formic or acetic acid, as they cause considerable damage.
• Phosphoric acid is also restricted as it can cause damage to the finish.
• Never mix any cleaning material with another.
• Never use cleaning materials that have an abrasive effect, such powdered and industrial cleansers, scouring pads or micro fiber cloths.

BATHROOM FAUCET LIMITED LIFETIME WARRANTY VI GO

VIGO INDUSTRIES, LLC {“VIGO”) EFFECTIVE JANUARY 1, 2019

VIGO offers the following limited warranty on each of its BATHROOM FAUCET Products* (the “Product”). This warranty extends only to the original purchaser/end-user for personal household use and is not transferrable. For commercial use, additional limitations apply.
VIGO warrants hoses and all mechanical components to be free from defects in workmanship and materials under normal household use for the period of ONE (1) year from the initial date of purchase by the purchaser/end-user, contractor, or builder from VIGO or an authorized VIGO Dealer.
VIGO warrants the cartridge to be free from defects in workmanship and materials under normal household use for the period of FIVE (5) years from the initial date of purchase by the purchaser/end-user, contractor, or builder from VIGO or an authorized VIGO Dealer.
VIGO warrants the finish of the Product to be free from defects in workmanship and materials under normal household use for the lifetime of the product by the original purchaser/end-user.
Subject to the Warranty provisions below, any product reported to VIGO or an authorized dealer as being defective within the warranty period will receive replacement parts and/or troubleshooting assistance to correct the issue. If a replacement unit is deemed necessary by VIGO, the replacement will be made with the same model (or with a product of equal value). This warranty extends to the original purchaser/end-user and is not transferrable to a subsequent owner. Neither the distributor, authorized dealer, nor any other person has been authorized to make any affirmation, representation, or warranty other than those contained in this warranty. Products sold in “as-is” condition, closeouts, discounted, resale, return purchases or purchases made through non- authorized dealers are not covered under the terms of this warranty. Any affirmation, representation, or warranty other than those contained in this warranty shall not be enforceable against VIGO or any other person. VIGO reserves the right to modify this warranty at any time with the understanding that such modifications will not alter the warranty conditions applicable at the time of sale for the products in question.

LIMITATIONS

This warranty shall not apply to instances of incorrect operating procedures, breakages, or damages caused by fault through improper installation, carelessness, abuse, misuse, misapplication, improper maintenance, or alteration of the Product, as well as damage due to hard water, chemical or natural corrosion, accident, fire, flood, an act of God, or any other casualty. When cleaning, handling, and maintaining the Product, avoid using abrasive cleaners, steel wools, and harsh chemicals as these will scratch, damage and/or dull the product and/or finish and void this warranty. The owner /end-user of the Product covered by the present warranty is entirely responsible for all labor costs, proper installation and any applicable plumbing or electrical wiring. VIGO neither installs nor supervises installation, nor hires contractors for this purpose. VIGO cannot be held responsible for any default, breakage, or damages caused thereby or resulting thereof, either directly or indirectly. The owner/end-user must provide requested images, photos, videos of the Product as described in the installation guide so that VIGO can properly troubleshoot and execute the warranty specified herein. All repair expenses and labor are the responsibility of the owner/end-user. This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by VIGO and all applicable rules, regulations, and legislation pertaining to such installations. This warranty does not apply unless the VIGO Product is installed by a fully insured, licensed professional. VIGO strongly recommends that such licensed professional have experience in the installation of bathroom and kitchen products. Installation of certain products, including but not limited to glass products (i.e. shower doors and glass sinks) by an inexperienced person may result in glass breakage, and consequently may cause personal injury or death. VIGO is not liable for personal injuries or deaths to any persons or for any direct special, incidental or consequential damage, loss of time, loss of profits, inconvenience, incidental expenses, labor or material charges, or other costs resulting from the use of the Product or equipment pertaining to the application of the present warranty, or resulting from the removal or replacement of any product or element or part covered by this warranty.
EXCEPT AS OTHERWISE PROVIDED ABOVE, VIGO MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURCHASE OR COMPLIANCE WITH ANY CODE. VIGO cannot be held liable for any amount over and above the purchase price paid for the Product by the owner /end-user, contractor, builder, or other installation professional.

COMMERCIAL LIMITATIONS

In addition to the above conditions and limitations, the warranty period for the products installed for commercial applications or used in commercial ventures is ONE (1) year from the initial date of purchase by the owner/end- user, contractor, or builder from an authorized dealer. VIGO is not responsible for loss of use or profit under any circumstances. If the product is used as a display, the warranty period begins when the product is placed on display. This warranty gives the owner/end-user specific legal rights. The owner/end-user may also have other rights which may vary from one state or province to another.

WARRANTY CONDITIONS

In order to obtain the warranty provided, please contact the VIGO Product Support Department during normal business hours at 866-591-7792, option 2 or via email at SUPPORT@VIGOINDUSTRIES.COM. VIGO will assist with troubleshooting and provide replacement parts as described above when the following conditions have been met: the failure is of the nature or type covered by the warranty; the user has informed VIGO of the nature of the problem during the warranty period; conclusive evidence (e.g. proof of purchase and images, video, etc.) is provided to the foregoing by the user proving that the failure occurred or was discovered within the warranty period. VIGO’s warranty obligation shall be discharged upon tender of replacement parts or product replacement. The customer’s refusal to accept the tender terminates VIGO’s warranty obligations.
*Certain models are pending approval.
Certification may be ended by VIGO or certification agencies without notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>