PHILIPS BRP490, BRP490L RoadFlair Eco Installation Guide

PHILIPS BRP490, BRP490L RoadFlair Eco

Specifications:

• Model : RoadFlair Eco BRP490 / 490L
• Input Voltage : 220-240V
• Frequency : 50/60Hz
• Power Consumption : 30-120W
• Number of LEDs : 12-40
• Color Temperature : 2200K-5700K
• IP Rating : IP66
• Impact Protection : IK08
• Energy Efficiency Class : B
• Weight : 1.8-2.8 Kg

Product Usage Instructions

Mounting Instructions:

1. Use a hex wrench to remove the screws from the luminaire.
2. Install the safety string and tighten the screw securely.
3. Ensure the safety string length exposes 0.7m.
4. Connect the power cord and signal cable as per the wiring instructions.

Wiring Instructions
On/Off Type Wiring:

• Connect the power supply to the luminaire side following the polarity markings.
• Use IP66 waterproof box for connections.

1-10V Control Type Wiring:

• Connect the 1-10V control signal using the specified color codes to the luminaire side and power supply side.
• Ensure correct connection for polarities.

SYMBOLS

Type

| LEDs

| CCT

| Power/W(max.)

| Wind force(m2)

| Weight(Kg)

| Factory Description

产品型说明

---|---|---|---|---|---|---
BRP490  12LED400( WW,722,727,R,P5)| 12|

2200K

2700K

3000K

4000K

5700K

| 30|

0.045

|

≈1.8

| BRP490x LEDaaa/bb cccc dddd eee fff gg.

x denotes housing type, could be L/nil, L denotes Large Housing;

aaa denotes rated lumen output. could be 45, 75 to181, E.g. aaa=181. The rated lumen output 18100lm;

bb denotes color temperature, CW=Cool White, NW=Neutral White, WW=Warm White, 727=CRI70&2700K, 722=CRI70&2200K;

ccc denotes rated system power, could be 30, 31,120, E.g. ccc=120, the rated system power is 120W;

ddd denotes Lens type: DW2n/DW2nR/nil; eee denotes driver type, PSA/nil;

fff denotes SPD, SP1/nil, SP1 means 10KV SPD,

SP5 means 15KV SPD, nil means blank;

gg denotes Socket, P5/nil, P5 means NEMA socket and shorting Cap, nil means blank;

BRP490  14LED450( WW,722,727,R,P5)| 14| 40
BRP490  18LED425(WW,722,727,R,P5)| 18| 50
BRP490  22LED475(WW,722,727,R,P5)| 22| 70
BRP490L 28LED450(WW,722,727,R,P5)| 28| 80|

0.07

|

≈2.8

BRP490L 32LED450(WW,722,727,R,P5)| 32| 90
BRP490L 36LED450(WW,722,727,R,P5)| 36| 100
BRP490L 40LED475(WW,722,727,R,P5)| 40| 120

This product contains a light source of energy efficiency class: B

*Maximum Number of Luminaire on MCB 16A Type C

1.6 Time of type B for MCB 16A

| *Maximum Number

of Luminaire on MCB 16A Type B

| Alternative Program

Driver Inrush Current

|

Driver Description

|

Model

---|---|---|---|---

The electrical circuit Touch current or protective conductor current (in some cases referred to Earth Leakage Current) may be greatly dependent upon electrical supply cables used such as its rating and length, proper connection of electrical supply cables to luminaires and wiring connection topology of luminaires to the supply electrical circuit amongst other site conditions.

| 18| 51A/25us@230V| PLS 65W 0.7-1.05A 1-10V DS| BRP490 12LED400
18| 51A/25us@230V| PLS 65W 0.7-1.05A 1-10V DS| BRP490 14LED450
18| 51A/25us@230V| PLS 65W 0.7-1.05A 1-10V DS| BRP490 18LED425
18| 51A/25us@230V| PLS 65W 0.7-1.05A 1-10V DS| BRP490 22LED475
9| 79A/122us@230V| XI EP 100W 0.7-1.05A 1-10V WL Y| BRP490L 28LED450
9| 79A/122us@230V| XI EP 100W 0.7-1.05A 1-10V WL Y| BRP490L 32LED450
9| 79A/122us@230V| XI EP 100W 0.7-1.05A 1-10V WL Y| BRP490L 36LED450
9| 78A/174us@230V| XI EP 150W 0.7-1.05A 1-10V WL Y| BRP490L 40LED475

Product Size And Dimension

Signify (China) Investment Co., Ltd.

• Building No. 9, Lane 888 Tianlin Road,
• Minhang District, Shanghai, China
• Postal code: 200233

Data is subject to change without notice.

Shorting cap (only for P5 NEMA version)

1. Shall be fixed by a qualified electrician.
2. Shall be fixed clockwise until the end. Rotation angle is about 10°.
3. The shorting cap provided with the luminaire is rated for 3 years’ service life.
4. The shorting cap should be replaced with the intended device or new shorting cap within 3 years.

Note

1. Must use Signify suggested shorting cap to ensure IP66.
2. Node installation refer to their MI.

Glare Ring in black (Only for DW2nR)

Safety String

1. Use a hex wrench to remove the screws from the luminaire
2. Install the safety string and tighten the screw.

1. Customers can install safety string as required.
2. Safety string is not provided by Signify, need to be prepared by user.
3. Material spec of safety string should be robust and not less than SUS304 ∅2.
4. Safety String length should expose 0.7m.

Connect the power cord & signal cable

Recommended to use waterproof box IP66, the dimension value must be below the pole arm inner diameter value, to ensure it go through the pole arm. Waterproof box is not provided by Signify.

Install the luminaire on the pole

• The angle of the pole : 0-15 degrees
• Pole diameter: 40-60mm

Surge protection device replacement

1. Need to remove the luminaire from the pole
2. Open the gear cover
3. Replace the damaged SPD unit.

After replacing the SPD, repeat steps 2 and 1 to restore the luminaire and light up the luminaire.

1. The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEEE electrical regulations or the national requirements.
2. Switch off main power supply before Installation, maintenance and any operation
3. The connection of power cable on the luminaire is type Y. If the external cable or cord of the luminaire is damaged, the cable should be replaced by the manufacturer or its service agent or a similar qualified person to avoid danger.
4. The light source and/or control gear contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.
5. Earthing contact to the customer end on the luminaire must be connected by installer, including whole use process that the earthing contact is always reliably linked to earth ground
6. The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 2.7m is not expected.
7. The insulation between LV and control circuit is basic insulation
8. The luminaire should avoid storage and usage in such a surrounding or an occasion that is with corrosion or hazardous gases like sulfide, halide, phthalate and so on.
9. The PC material cannot be used in such an ambiance that is with ethylamine, or tetra-dichloroethylene, which is corrosion or hazardous to to material and so on.
10. For periodic cleaning maintenance of luminaire in which PC material is exposed to the outside, Acid solution or alkali solution cannot be used as a cleaning solution to wash the outside surface of luminaire
11. The manufacturer is not responsible to improper use, change and modification structure on the luminaire. Any damage or unsafety loss caused by these factors under not to be allowed, the manufacturer do not take any responsibility for this situation.
12. All materials used in the luminaire must be in compliance to RoHSas the table.

©2020 Signify Holding
All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Signify Holding The Netherlands

Please inform yourself about the local waste disposal, separation and collection system for electrical and electronic products and packaging. Please act according to your local rules and do not dispose your old product and packaging with your normal household waste. The correct disposal of the packaging, your product and/or batteries will help prevent potential negative consequences for the environment and human health. Batteries should be disposed separately from the municipal waste stream via designated collection facilities. When disposing of a product that contains non-user replaceable batteries, the non-user replaceable batteries shall be removed by a professional.

Warming

1. The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEEE electrical regulations or the national requirements.
2. Turn the power off before inspection, installation or removal.
3. The light source and/or control gear contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
4. Refer to the technical datasheet for additional electrical properties to ensure safe installation.
5. The luminaire installed must not be in contact with combustible materials.
6. Ensure power supply cables (L-N / L-N-E) are connected correctly before switching on.

Maintenance

1. Ensure power supply is switched off before attempting any maintenance work.
2. Periodic cleaning of the luminaire optical lens cover will ensure maximum optical efficiency.
3. The luminaire optical lens cover shall be cleaned with clean water and non-abrasive soap, cleaner or detergent solution.

Caution
The Luminaire must be used within the applicable product specifications, installation instructions and environmental conditions for storage & operations according to application guidelines provided by Signify for product Warranty to be valid.

FAQ

Q: What is the maximum number of luminaires that can be connected to a 16A MCB?
A: The maximum number varies depending on the type of MCB. For Type C, it is 1.6 times, and for Type B, it is 18.

Q: Is the safety string provided with the product?
A: No, the safety string is not provided by Signify and needs to be prepared by the user. It should be made of robust material like SUS304 2 and have a length of 0.7m.

Q: What is the purpose of the shorting cap mentioned in the manual?
A: The shorting cap is used to ensure IP66 protection and should be used as suggested by Signify for proper functionality.

References

• Экологичные решения для светодиодного освещения | Philips lighting
• Екологічні рішення для світлодіодного освітлення | Philips lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>