HOLMAN CLBRGB60 RGB Colour Bluetooth Garden Light Controller User Manual

CLBRGB60 RGB Colour Bluetooth Garden Light Controller

“`html

Product Information

Specifications:

• Model: CLBRGB60
• Warranty: 2 Year Replacement Guarantee
• Power: Connect up to 60W of Lights
• Cables: 4-Pin Plug + Socket

Product Usage Instructions

Connecting the Cables

Ensure you have the compatible cables for your controller.

4-Pin Plug + Socket:

1. Connect the power cable to an outdoor power point.

2. Ensure the socket is weatherproof if you have mounted your
   controller outdoors.

3. Ensure the Plug + Socket cable ends are touching and the caps
   are hand tightened only.

4. An end cap is provided on each cable to weatherproof the last
   connector.

Setup Example (Connect up to 60W of Lights)*

Example using RGB Colour 4-Pin Plug + Socket only.

• Controller
• Spotlight
• Path Light
• Deck Lights
• Extension Cable
• Power Cable
• Connection Tees
• Lighting Scenes
• Weatherproof End Cap

Spotlights: Great for illuminating individual
plants or trees and turning them into a garden feature.

Path Lights: Create a statement entrance to
your home by lighting pathways around your front door.

Deck Lights: Light up the perimeter of your
deck to enhance your outdoor entertaining area.

FAQ

Q: What is the warranty for this product?

A: The product comes with a 2 Year Replacement Guarantee. For
more details, refer to the Warranty Information section in the user
manual.

Q: How do I register my new product for an extended

warranty?

A: Visit our website at
www.holmanindustries.com.au/product-registration/ to register your
new product. This will ensure we have a copy of your purchase and
activate an extended warranty.

Q: What should I do if I suspect my product is defective?

A: If you suspect your product is defective, please contact us
directly at 1300 716 188 or email support@holmanindustries.com.au
for clarification and advice. If covered under warranty, present
your defective product and purchase receipt to the retailer for
replacement.

“`

RGB Colour Bluetooth® Garden Light Controller

Warranty Information

2 Year Replacement Guarantee
Holman offers a 2 year replacement guarantee with this product.
In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
As well as your statutory rights referred to above and any other rights and remedies you have under any other laws relating to your Holman product, we also provide you with a Holman guarantee.
Holman guarantees this product against defects caused by faulty workmanship and materials for 2 years domestic use from the date of purchase. During this guarantee period Holman will replace any defective product. Packaging and instructions may not be replaced unless faulty.
In the event of a product being replaced during the guarantee period, the guarantee on the replacement product will expire 2 years from the purchase date of the original product, not 2 years from the date of replacement.

To the extent permitted by law, this Holman Replacement Guarantee excludes liability for consequential loss or any other loss or damage caused to property of persons arising from any cause whatsoever. It also excludes defects caused by the product not being used in accordance with instructions, accidental damage, misuse, or being tampered with by unauthorised persons, excludes normal wear and tear and does not cover the cost of claiming under the warranty or transporting the goods to and from the place of purchase.
Should you suspect your product may be defective and need some clarification or advice please contact us directly:
1300 716 188 support@holmanindustries.com.au 11 Walters Drive, Osborne Park 6017 WA
If you are certain your product is defective and is covered by the terms of this warranty, you will need to present your defective product and your purchase receipt as proof of purchase to the place you purchased it from, where the retailer will replace the product for you on our behalf.

Should you have any questions about this product or its operation please call our customer service helpline on 1300 716 188 or visit support.www.holmanindustries.com.au

We really appreciate having you as a customer, and would like to say thank you for choosing us. We recommend registering your new product on our website. This will ensure we have a copy of your purchase and activate
an extended warranty. Keep up to date to with product information and special offers available through our newsletter.
www.holmanindustries.com.au/product-registration/ Thanks again for choosing Holman

RGB Colour Bluetooth® Garden Light Controller

CLBRGB60

User Guide

Connecting the Cables

Ensure you have the compatible cables for your controller.

CLBRGB60

4-Pin Plug + Socket

Connect the power cable to an outdoor power point. Ensure the socket is weatherproof if you have mounted your controller outdoors. Ensure the Plug + Socket cable ends are touching and the caps are hand tightened only. An end cap is provided on each cable to weatherproof the last connector.

Setup Example (Connect up to 60W of Lights)*
Example using RGB Colour 4-Pin Plug + Socket only.
» Only use lights within one colour system, lights can not be controlled individually.
» This controller has a capacity of 60W. Power is consumed by both the lights and the cable. It is best to connect no more than 55W of lights, and no more than 75m of cable to a controller.
» This controller has an automatic power overload switch that will turn the lights off if too much power is being consumed.

Controller

Spotlight

Path Light

Deck Lights Extension Cable Power Cable

Connection Tees

Lighting Scenes

Weatherproof End Cap

Spotlights: Great for illuminating individual plants or trees and turning them into a garden feature.

Path Lights: Create a statement entrance to your home by lighting pathways around your front door.

Deck Lights: Light up the perimeter of your deck to enhance your outdoor entertaining area.

Mounting the Controller

Our Plug + Socket system means expansion is easy with no electrician required. Install the controller near a 240V AC power point ideally located in a house, garage, or exterior electrical cubicle. For ease of use, eye level placement is recommended. Ideally, your controller location should not be exposed to rain or areas prone to flooding or heavy water. This controller comes with an internal transformer installed in a weatherproof enclosure. The housing is designed for indoor or outdoor installation but the power cable needs to be plugged into an outdoor power point under cover. Drill a hole suitable for a wall plug and a insert a screw with a minimum 7mm wide screw-head. Hang the controller over the screw head using the key hole slot positioned externally on the top centre of the back of the controller. If your controller requires extra support you can drill an additional hole and fasten it through the spare holes positioned internally under the terminal cover.

WARNING!
KEEP NEW OR USED BUTTON/COIN BATTERIES OUT OF REACH OF CHILDREN

The battery can cause severe or fatal injuries in 2 hours or less if it is swallowed or placed inside any part of the body. If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention
Contact the Australian Poisons Information Centre for 24/7 fast, expert advice: 13 11 26
Refer to your local government guidelines on how to correctly dispose of button/coin batteries.

Downloading iGardenerTM

Step 1: Download the iGardenerTM app from the App Store or Google Play.

Step 2: Enable Bluetooth® on your device.

Step 3:

Ensure your controller is connected

to power. Open the iGardenerTM app

and navigate to Garden Lighting.

1

2

3

Visit www.holmanindustries.com.au/instruction-manuals or scan the QR Code for a comprehensive guide on using the iGardenerTM app. Bluetooth® compatible controllers are designed to be operated via the iGardenerTM app only.
Troubleshooting
Lights are not turning on: Ensure the controller is connected to a power point and turned on. Check all Plug & Socket cables are properly connected. Check that you have not connected too many lights to one controller–do not exceed 60W. Check that the lights are switched on via the iGardenerTM app.
Lights are too dim or not turning on: Connecting excessive lengths of cable will result in wattage loss. Try to use the least amount of cable length as possible.

References

• Product Registration and Extended Warranty - Holman Industries

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>