HOLMAN DLRGB3003 RGB Colour Deck Lights

Specifications

• Product Code: DLRGB3003
• 4-Pin Plug + Socket Connection
• Deck Light Size: 30mm

Product Usage Instructions

Overview
Thank you for choosing Holman 30mm RGB Colour Deck Lights. This DIY system is designed to illuminate and enhance the ambiance of your outdoor space. These lights can be used for lighting wooden steps or creating a safety barrier around your decking.

Setup

Choosing Your Controller
Holman offers a range of lighting controllers to suit different needs. Select the RGB Colour Lighting Controller that best fits your requirements.

Mounting Your Controller
Prior to installing your Deck Lights, mount the Lighting Controller to determine the starting point. It is recommended to place the controller at eye level for easy access.

1. Install the Lighting Controller near a 240V AC power source in a sheltered location.

Installation

Main Lighting Cable (Extension Cable)
Once the Lighting Controller is in place, connect the main lighting cable to begin branching off to your Deck Lights.

1. Connect the first Extension Cable to the Lighting Controller.
2. Choose the appropriate cable length to reach your Deck Lights.

Connection Tee
Each Deck Lights pack includes a Connection Tee to link the lights to the main cable.

1. Attach one end of the Connection Tee to the Extension Cable.
2. Secure the Connection Tee with the weatherproof end cap.
3. The Connection Tees have a mini cable end for connection.

Deck Light Spacing
Deck Lights are spaced 1800mm apart when connected. Mark your decking before installation to ensure correct spacing.

FAQ

Q: Are these lights compatible with other brands?
A: No, these lights only work with Holman 4-Pin Plug + Socket products. Using other brands will void the warranty.

Please read these instructions in full before proceeding with setup.
iOS is a trademark of Apple Inc. Android is a trademark of Google LLC. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. All other content is Copyright © Holman Industries 2023

PRODUCT CODE: DLRGB3003

4-Pin Plug + Socket Connection

Holman RGB Colour Deck Lights use a 4-Pin Plug + Socket connection.

Only other Holman 4-Pin Plug + Socket products are compatible with these lights. These lights are not compatible with other brands and will void your warranty if used with other brands.

Overview

Introduction

Thank you for purchasing Holman 30mm RGB Colour Deck Lights. Our system is completely DIY and designed to help illuminate and add ambience to your outdoor space. These can also be used to light up wooden steps or create a safety barrier around the edge of your decking.

® This instruction manual contains useful information on the proper use and care of this product. Please read through all instructions before attempting assembly. Keep this user guide handy for future use.

Package Contents

1.  5× 30mm DAISY-CHAIN deck lights
2. 1× 30mm END deck light
3. 1× 4-Pin Connection Tee

Setup

Choosing your controller

Holman have a range of lighting controllers to suit all users. Choose the correct RGB Colour Lighting Controller that suits your requirements.

RGB Colour Wi-Fi Garden Light Controller Our latest Lighting Controller features Wi-Fi connectivity, allowing access to your Garden Lights from anywhere in the world. Smart automations and custom scene options allow you to light up your garden, however you want.

RGB Colour Bluetooth® Garden Light Controller. Our Garden Light Controller gives you custom scenes and full brightness control with a Bluetooth® connection
and the iGardener™ app. Connect up to 4 controllers to one device.

Mounting your controller
Before beginning installation of your Deck Lights, you will need to install your Lighting Controller to determine your starting point.
For ease of use, eye level placement is recommended.

Ideally, your controller location should not be exposed to rain or areas prone to flooding or heavy water.

1. Install the Lighting Controller [a] near a 240V AC power point ideally located in a house, garage, or exterior electrical cubicle
   ® All Holman controllers have a 60w capacity.
   Lighting set-ups that include more that 60w of garden lights will require additional controllers

Installation

Main Lighting Cable (Extension Cable)
Once the Lighting Controller is mounted, you can connect your main lighting cable. This cable is where you will ‘branch’ off your Deck Lights or other Holman lighting products.

1. Connect your first Extension Cable [a] to the Lighting Controller [b]
2. Secure the Extension Cable by hand tightening the weather proof end cap [c] on the end of the cable
   ® Extension Cables are available in 1m, 2m, 5m and 10m. Choose the correct length to reach from your Lighting Controller to your first lot of Deck Lights

Connection Tee
Each pack of Deck Lights comes with a Connection Tee.
This is what connects your Deck Lights to the main lighting cable.

1. Join one end of the Connection Tee [a] to the Extension Cable [b]
2. Secure the Connection Tee by hand tightening the weather proof end cap [c]
3. Connection Tees come with one mini cable end [d],this end connects to your lighting product
   Á Do not use more than one (1) pack of Deck Lights per Connection Tee. Doing so may result in wattage loss
   ® If you are connecting more than one pack of Deck Lights, refer to the connection diagram on page 12 and 13

Deck Light Spacing
Deck Lights come with 1800mm of space between each light when connected. Before installation, we suggest marking your decking exactly where you want to install your lights to ensure the spacing is correct.

Drilling Holes.

Deck panels will need to be removed to hide lighting cables underneath. For safety, we also recommend removing deck panels to ensure no other cabling is behind.

Refer to our sizing chart below to determine the correct spade drill bit size

1. Remove the deck panels that you will be drilling into
2. Drill the required holes into your deck that were marked previously [a]

SPADE DRILL BIT SIZE

Inserting Deck Lights

1. Insert both cable ends of one of your Daisy-Chain Deck Lights [a] through the first drill hole
2. Push the Deck Light into your drill hole [b] until it is flush with your decking. The metal arms will secure against the back of your deck
3. Connect this Deck Light to your Connection Tee [c] with the mini cable end
4. Insert the rest of your Daisy-Chain Deck Lights into your deck using steps 1 and 2
5. Insert the End Deck Light into the 6th drilled hole and connect to the last Daisy-Chain Deck Light
6. Connect the cabling of all Deck Lights together

Refer to the opposing drawing for correct installation
® Refer to the steps on page 12 to 13 for installing multiple packs of Deck Lights

Deck Lights Connection Drawing

1. Garden Light Controller
2. Extension Cable
3. Connection Tee
4. Daisy-Chain Deck Lights
5. End Deck Light

Need help? Just ask!
The Holman website has a host of additional information on features. Head to support.holmanindustries.com.au for more tips, tricks and support content.
If you still need help, feel free to email our friendly Customer Service team at support@holmanindustries.com.au or call at 08 9416 9999.

Inserting Multiple Deck Light Packs

1. Attach your second Extension Cable [a] to the free end of your first Connection Tee [b] ® If you are continuing your row of Deck Lights from earlier, ensure that this Extension Cable is long enough to reach from your first Connection Tee, to your next empty deck light space
2. Join the Connection Tee [c] from your second pack of Deck Lights to your second Extension Cable
3. Install your second set of Daisy-Chain Deck Lights [d] and End Deck Light [e] as per the previous steps on page 10 4. If you are ending your lighting system here, ensure to attach the weatherproof end cap [f] onto the end of your Connection Tee

® To expand your lighting system further, join additional Extension Cables, Expansion Tees or Connection Tees to your second Connection Tee

Specifications

30mm RGB Colour Deck Lights

• Input
  12 V

• Light Output
  0.3w per light

• Pack Output
  1.8w total

• Size
  ø30mm

• Height
  25mm

• D r ill Bit Size
  22mm

• Brightness
  6 lm

• Beam Reach
  1m max

• Colour Range
  RGB

• Beam Angle
  120º

• Lifespan
  50,000 hrs

• Waterproof Rating
  IP67

• Connection
  4-Pin Plug + Socket

• Housing
  Stainless steel and polycarbonate

• Deck Light Cable Length
  1800mm

• Deck Light Cable Diameter
  10mm

• Leader Cable Length
  900mm

Warranty

2 Year Replacement Guarantee

Holman Industries offers a 2 year replacement guarantee with this product.

In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

As well as your statutory rights referred to above and any other rights and remedies you have under any other laws relating to your Holman product, we also provide you with a Holman guarantee.
Holman Industries guarantees this product against defects caused by faulty workmanship and materials for 2 years domestic use from the date of purchase.

During this guarantee period Holman Industries will replace any defective product. Packaging and instructions may not be replaced unless faulty.

In the event of a product being replaced during the guarantee period, the guarantee on the replacement product will expire 2 years from the purchase date of the original product, not 2 years from the date of replacement.

To the extent permitted by law, this Holman Replacement Guarantee excludes liability for consequential loss or any other loss or damage caused to property of persons arising from any cause whatsoever. It also excludes defects caused by the product not being used in accordance with instructions, accidental damage, misuse, or being tampered with by unauthorised persons, excludes normal wear and tear and does not cover the cost of claiming under the warranty or transporting the goods to and from the place of purchase.

Should you suspect your product may be defective and need some clarification or advice please contact us directly:

1300 716 188
support@holmanindustries.com.au
11 Walters Drive,
Osborne Park 6017 WA

If you are certain your product is defective and is covered by the terms of this warranty, you will need to present your defective product and your purchase receipt as proof of purchase to the place you purchased it from, where the retailer will replace the product for you on our behalf.

Thanks for being a

SMARTGARDENER

We really appreciate having you as a customer, and would like to say thank you for choosing us.
We recommend registering your new product on our website. This will ensure we have a copy of your purchase and activate an extended warranty. Keep up to date to with relevant product information and special offers available through our newsletter.
www.holmanindustries.com.au/product- registration/

For the #SMARTGARDENER
Copyright © 2023 Holman Industries

References

• Product Registration and Extended Warranty - Holman Industries

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>