kikkaboo WINNIE Wearable Electric Breast Pump Instruction Manual

: June 1, 2024
: kikkaboo

Table of Contents

kikkaboo WINNIE Wearable Electric Breast Pump
PRODUCT FEATURES
SAFETY INFORMATION
PARTS (Figure I)
DISPLAY (Figure II)
Cleaning and sanitizing (Figure III)
BATTERY OPERATION
Assembling the pump (Figure IV)
Using the pump (Figure V)
Storing breast milk
Troubleshooting
Technical specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

kikkaboo WINNIE Wearable Electric Breast Pump

kikkaboo-WINNIE-Wearable-Electric-Breast-Pump

READ THIS USER MANUAL CAREFULLY BEFORE USE AND SAVE IT FOR FUTURE REFERENCES.

PRODUCT FEATURES

Electric breast pump with innovative wearable design, without external cords and tubes. Designed for moms on the go. It is so convenient that you can wear it
inside your nursing bra. Quiet and lightweight. With large rechargeable lithium battery 1500 mAh, fully charged could be used for 2 hours. Anti- backflow protection to prevent breast milk from backing up to the pump, prevent contamination and keep milk fresh. Smart display, which features a memory function. Meet different needs with four modes: Stimulation, Massage, Pumping and Bionic mode with 9-level suction force adjustment. Soft silicone breast shields – 18, 20 and 22mm. Silicone insert 16mm. Milk bottle 140ml. Made of safe food-grade materials.

SAFETY INFORMATION

Intended use:
The breast pump is intended to express and collect milk from the breasts of a lactating woman. The precondition to use the breast pump is to have unclogged milk ducts. Some new mothers appear to have clogged milk ducts owning to congenital nipple depression or insufficient milk. It is necessary to have a professional breast check to assure milk ducts are not clogged and the lactation is well established before you use a breast pump. The breast pump is NOT intended to induce first lactation. The breast pump is intended for a single user!

WARNING! Never use the breast pump while you are pregnant, as pumping may cause childbirth.
Never use the breast pump for other purposes except those listed in this manual.

Warnings to avoid choking, strangulation and injury

Do not allow children or pets to play with the device, the adaptor or accessories.
Children should be supervised to ensure that they do not play with the device.
Do not leave the breast pump unattended when it is charging.
Keep out of the reach of children.
This breast pump is not intended for use by women with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. Such women can only use this breast pump if they are supervised by or have received proper instruction concerning use of the product by a person responsible for their safety.

Warnings to avoid electric shock and burns

Inspect the breast pump, including the adaptor, for signs of damage before each use. Do not use the breast pump if the adaptor or cable is damaged, if it does not work properly or if it has been dropped or submerged in water.
Use only the specified voltage and the suggested USB adaptor to prevent overheating of the adaptor, any damage or failure.
Do not touch the USB adaptor and the breast pump during a thunderstorm.
Do not place the breast pump/USB adaptor in direct sunlight or rain, near heaters or other hot appliances, in any location exposed to extremely high or low temperatures, high humidity or in dusty locations.
Do not place heavy objects on, or damage the cable or adaptor. Do not forcibly bend or pull the USB cable. Always hold the USB adaptor when disconnecting from the power outlet. Make sure that the plug is fully inserted to the power outlet. Do not use an outlet that is loose.
Do not allow the breast pump/ USB adaptor/cable/battery to get wet. Do not disassemble or modify the breast pump/ USB adaptor/battery.
Disconnect the USB adaptor and stop using the breast pump if you notice abnormal odor, heat, discoloration, deformation or anything unusual while using or storing it.

Warnings to avoid poisoning and contamination and to ensure hygiene

For hygienic reasons, the breast pump is only intended for repeated use by a single user.
Before each use, clean, rinse and disinfect all parts, except the main device, USB cable and adaptor of the pump.
Only store breast milk collected with a cleaned and sanitized pump.
Do not use the breast pump if the silicone diaphragm appears to be damaged or broken.
Do not use antibacterial or abrasive cleaning agents when you clean the breast pump parts.

Warnings to avoid breast and nipple problems and pain

Before each use, check the breast pump for signs of damage. Do not use the breast pump if it is not working properly.
Do not attempt to remove the pump body from your breast while under vacuum. Switch off the appliance and break the seal between your breast and the pump funnel with your finger. Then remove the pump from the breast.
Never, use the breast pump when you are sleepy or drowsy to avoid lack of attention during use.
Always switch off the breast pump before you remove the pump body from your breast to release the vacuum.
Never, use accessories or parts from other manufacturers or those not specifically recommended by the manufacturer. This could lead to improper working of the appliance and could influence Electromagnetic Compatibility (EMC). If you use such accessories or parts, your warranty becomes invalid.
Do not continue pumping for more than five minutes at a time if you do not succeed in expressing any milk. Try to express at another time during the day.
If the process becomes very uncomfortable or painful, stop using the pump and consult your breastfeeding advisor.
Never, drop or insert any foreign objects into the openings.

Caution to prevent personal injury, damage to and malfunctioning of the product

Prevent the adaptor, USB cable and main unit from coming into contact with water.
Keep the adaptor and the silicone parts away from heated surfaces to avoid overheating and deformation of these parts.
Never put the main unit or the adaptor in water, in a dishwasher or in a sanitizer. Although the breast pump is compliant with applicable EMC directives, it may still be susceptible to excessive emissions and/or may interfere with other equipment. A consequence can be that the breast pump switches off or goes into error mode. To prevent interference, keep other electric equipment away from the breast pump during expressing (see ‘Technical information”).
There are no user serviceable parts inside the main unit of the breast pump. No modification of the equipment is allowed. If you do, your warranty becomes invalid.
Do not drop or hit the breast pump/USB adaptor. Do not press on the display.
The main unit, the USB cable and the adaptor do not require cleaning and sterilizing, as they do not come into contact with breast milk.
Never, use alcohol or other organic solvents to clean the breast pump.
Do not use the breast pump in any way or for any purpose not described in this guide. Doing so may result in accidents or damage the breast pump.

WARNINGS FOR USING LITHIUM POLYMER BATTERIES

ONLY an adult can plug the adaptor!
Do not bend, drill (especially with metal objects) or damage the battery in any other way.
Charge the battery only with the adaptor provided by the producer!
Do not allow short circuit!
Keep the product in room temperature!
Do not subject to direct sunlight!
Never leave a charging battery without supervision!

Battery may explode if mistreated!
REMARK : The battery compartment is located inside the main device.
ADVICE : Charge the battery fully before use to save it and prolong its life.
IMPORTANT! To replace the battery contact the retailer or an authorized service!
CAUTION! When you stop using the product, do not dispose of it with normal house- hold waste but hand it over in an official waste collecting point. The waste formed from damaged electrical and video devices, batteries, adaptors, must be disposed of separately. Throwing them out in containers for household waste is forbidden.

PARTS (Figure I)

Main unit x 1;
Silicone diaphragm x 2;
Milk bottle x 1;
Bra adjustment buckle x 1;
Silicone valve x 2;
Seals x 2;
Linker x 1;
Milk bottle lid x 1;
USB adaptor x 1;
USB charging cable x 1;
Silicone insert 16mm x 1;
Silicone breast shield x 3 (18mm x 1; 20mm x 1; 22mm x 1).

kikkaboo-WINNIE-Wearable-Electric-Breast-Pump-1

DISPLAY (Figure II)

Suction increase;
Stimulation mode;
Massage mode;
Suction level;
Power/mode adjustment button;
Battery indicator;
Pumping mode;
Suction decrease;
Bionic mode.

kikkaboo-WINNIE-Wearable-Electric-Breast-Pump-2

Power/mode adjustment button: press for 2 seconds to switch on or off the breast pump. Tap once to change the mode.
When the breast pump is switched on, it will start with Stimulation mode. After 2 minutes of use, it will automatically change to Pumping mode.
The breast pump features a built-in memory function. When switched on, the machine automatically enters and up shifts to the working mode and suction level you used last time.
Suction levels: Stimulation mode: L1-L9; Massage mode: L1-L9; Pumping mode: L1-L9; Bionic mode: L1-L9.
Battery indicator: it shows the rest battery percent; please, charge when the battery is low.
The breast pump will automatically stop working after 30 minutes of work.

Cleaning and sanitizing (Figure III)

The main device, the USB cable and the adaptor do not require cleaning and sanitizing, as they do not come into contact with breast milk. Clean and sanitize all other parts of the breast pump before first use.

Do not heat or sterilize in a microwave oven.
Before and after use, please clean and disinfect the parts in contact with breast milk.
Caution! Never put the main device, USB cable or the adaptor in water, in a dishwasher or in a sanitizer, as this causes permanent damage to these parts.
Disassemble the breast pump completely as shown in Figure III.
Before first use, disinfect in boiling water for 5 minutes all parts except the main device, USB cable and the adaptor. This ensures hygiene.
Be careful when removing and cleaning the valve. If it breaks, your breast pump will not work properly.
To clean the valve, gently rub it between your fingers in warm water with a little liquid detergent. Do not insert objects into the valve as this may damage it.
Before first use, disinfect in boiling water for 5 minutes all parts except the main device, USB cable and the adaptor. This ensures hygiene.
During the disinfection with boiling water, do not allow the parts to touch the side of the pot. This may cause irreparable deformation or damage to the product for which KikkaBoo is not responsible.
Clean carefully before each subsequent use to ensure hygiene.
Wash all parts, except the main device, USB cable and the adaptor with warm water and delicate detergent.
Always rinse all parts except the main device, USB cable and the adaptor thoroughly after each wash.
Wash thoroughly and rinse all parts, except the main device, USB cable and the adaptor with clean water, including areas that may not be visible but through which the milk has passed, to remove milk debris.
All parts, except the main device, USB cable and the adaptor can be sterilized up to 10 minutes in a steam sterilizer intended for nursing mothers and baby products.
Do not place in a dishwasher.
Do not place in a microwave oven. Do not heat the product in traditional ovens, on hot plates or open flames.
Avoid the use of sharp or abrasive materials, as this may damage the product.
Do not clean or allow the product to come into contact with solvents or aggressive chemicals. This may damage the product.
After cleaning the product, dry all parts thoroughly and store in a clean and dry place without direct sunlight and away from heat sources.
Note : Be sure to clean and disinfect the relevant parts of the breast pump. Wash your hands thoroughly before working on clean parts!
Warning! Be careful, as the cleaned parts may still be hot. Only start assembling the breast pump when the cleaned parts are cooled down.
Note : It is normal if there is a residual smell. Clean the product according to the instructions, it can help effectively reduce or eliminate the smell.

kikkaboo-WINNIE-Wearable-Electric-Breast-Pump-3

When to wash and sanitize (Figure I)

Before first use wash and sanitize: the breast shield and the insert (I-11; I-12); breast pump kit (I-2; I-3; I-5; I-7; I-8).
Before and after each use wash: the breast shield and the insert (I-11; I-12); breast pump kit (I-2; I-3; I-5; I-6; I-7; I-8)
Once per day sanitize: the breast shield and the insert (I-11; I-12); breast pump kit (I-2; I-3; I-5; I-6; I-7; I-8).
Dry all parts after washing or sanitizing. Wash your hands and assemble the complete breast pump according to the figure IV.

BATTERY OPERATION

WARNING! Before first use, fully charge the battery for 2 hours uninterrupted! Once the pump is turned on, the battery indicator icon on the display will show the remaining battery life until the battery runs out. When the battery is low the battery indicator icon will start flashing. When the battery is fully charged the indicator will display a full battery icon. Attention: Battery cannot be charged over 24 hours.

Assembling the pump (Figure IV)

Important:

Before assembling the pump, make sure that all parts, except the main device, USB cable and the adaptor are cleaned and sterilized.
Check breast pump kit components for wear or damage before each use. Replace if necessary.
Always inspect all parts prior to use for cleanliness.
To prevent damage to the breast pump all components must be completely dry before use.

Wash your hands thoroughly with soap and water before touching the breast pump, breast pump kit and the breast.
Install the valve and the seal into the bottom of the linker, make sure they are installed in the correct way.
Install the silicone diaphragm into the linker.
Place the assembled linker into the main device.
Insert the milk bottle into the main device.
Install the silicone shield or the silicone insert.

kikkaboo-WINNIE-Wearable-Electric-Breast-Pump-4

When to express milk
If breastfeeding goes well, it is advisable (unless advised otherwise by your healthcare professional/ breastfeeding advisor) to wait until your milk supply and breastfeeding schedule are established (normally at least 2 to 4 weeks after giving birth) before you start expressing.

Exceptions

If breastfeeding does not go well immediately, expressing regularly can help to establish and maintain your milk supply.
If you are expressing milk for your baby to be given in hospital.
If your breasts are engorged (painful or swollen), you can express a small amount of milk before or between feeds to ease the pain and to help your baby latch on more easily.
If you have sore or cracked nipples, you may wish to express your milk until they are healed.
If you are separated from your baby and wish to continue to breastfeed when you are reunited, you should express your milk regularly to stimulate your milk supply.

You need to find the optimum times of the day to express your milk, for example just before or after your baby’s first feed in the morning when your breasts are full, or after a feed if your baby has not emptied both breasts. If you have returned to work, you may need to express during a break.
Using a breast pump requires practice and it may take several attempts before you succeed. Fortunately, the KikkaBoo electric breast pump is easy to assemble and use so you will soon get used to expressing with it.

Using the pump (Figure V)

Wash your hands thoroughly and make sure your breasts are clean.
Hold the breast shield onto your breast with your thumb and index finger. Support your breast with palm of your hand. Place your nipple in the center of the assembled sili-cone shield/insert. Gently press the pump to your breast. Make sure your nipple fits properly.
Place your nursing bra above the pump.
Turn on the breast pump by прессинг the power button and choose the mode you prefer.
Find a comfortable position. Make sure not to lie down or recline.

The breast pump automatically starts up in simulation mode. You can change the level of the stimulation mode by using the “+” and “-” buttons. After two minutes, it will automatically transition to pumping mode. If your milk begins to flow before two minutes, press the mode change button to manually transition to pumping mode.
Once you are in the pumping mode, increase the suction level by using the “+”button until pumping feels slightly uncomfortable (not painful), then decrease slightly using the “-”button.
Note : stimulation and massage mode are fast sucking pump rhythms, which aim to stimulate milk ¬flow. Pumping mode is slower sucking rhythm for gentle and efficient milk removal after milk has started fl¬owing.
When milk flow stops, you can switch to the bionic mode. It aims to trigger another let-down by combining fast and slow pumping rhythms.

kikkaboo-WINNIE-Wearable-Electric-Breast-Pump-5

Attention : Do not always use the maximum level of each mode, just choose the most comfortable level for you. Depending on your own personal comfort, you may wish to use a higher suction level that
provides deeper suction. You can always return to a lower suction level.

Note : Do not worry if your milk does not flow immediately. Relax and continue pumping. The milk will soon flow, even if you do not use all the suction power that the pump can create. The first few times when you use the breast pump, you may need to use a higher suction mode to get your milk flowing.
Warning! Do not pump for more than 5 minutes without interruption. If there is still no milk flow, try expressing at another time of the day.
When you have finished expressing, turn off the breast pump by pressing the power button for 2 seconds.

To collecting the milk after expression

Take out the pump from your nursing bra.
Press the button in the middle of the device in order to release the milk bottle.
Pour the breast milk into a feeding bottle in the indicated direction as shown in figure V-8.

Storing breast milk

Warning! Always refrigerate or freeze expressed milk immediately. Store only fresh milk. Store only breast milk collected with a cleaned and sanitized pump to ensure hygiene. Always store breast milk in sanitized containers or bottles fitted with a sanitized screw ring and sealing disc or in pre-sterilized milk storage bags. Do NOT fill the containers, bottles or the milk bags completely. Leave some space as milk volume increases during freezing.

Always clearly label the date and time of expression on the containers, bottles or the milk bags.
Always use older breast milk first.
In order to keep the nutritional content of the breast milk, thaw in a refrigerator compartment or under running tap water without opening the container, bottle or bag. Stored milk can be thawed overnight in a refrigerator, then gradually heated in a warmer or hot water.
Shake the thawed milk to mix fat particles and the remaining milk ingredients. Thawed milk is usable for 24 hours if it is stored in the refrigerator.
Never refreeze thawed milk.
Never combine freshly expressed and thawed milk.
Never heat milk by boiling or using the microwave.
Always check food temperature before feeding.
Discard any milk that is left over.

Freshly expressed breast milk storage guidelines (for healthy term babies)

Room temperature up to 25°C, up to 4 hours.
Cooler with frozen ice packs -15°C to 4°C, up to 24 hours.
Refrigerator 4°C, up to 3 days.
Freezer -18°C to -20°C, up to 6 months.

Thawed breast milk storage guidelines (for healthy term babies)

Room temperature up to 25°C, up to 2 hours.
Cooler with frozen ice packs -15°C to 4°C, up to 2 hours.
Refrigerator 4°C, up to 24 hours.
Freezer NEVER REFREEZE thawed breast milk.

Breast milk left from a feeding
Discard any milk that is leftover.

Baby feeding

Inspect the feeding nipple before each use and pull the feeding nipple in all directions. Throw away at the first signs of damage or weakness.
Never dip the nipple in sweet substances or medication, your child may get tooth decay.
Do not microwave. Do not heat the product in traditional ovens or on hot plates or open flames.

For your child’s safety and health WARNING!

Continuous and prolonged sucking of fluids will cause tooth decay.
Always check food temperature before feeding.
Throw away at the first signs of damage or weakness.
Keep components not in use out of the reach of children.
Never attach to cords, ribbons, laces or loose parts of clothing. The child can be strangled.
Always use this product with adult supervision.
Never use feeding teats as a soother.
Tooth decay in young children can occur even when non-sweetened fluids are used. This can occur if the baby is allowed to use the bottle for long periods through the day and particularly through the night, when saliva flow is reduced or if it is used as a soother.
Accidents have occurred when babies have been left alone with drinking equipment due to the baby falling or if the product has disassembled.

Troubleshooting

Problem: I experience pain when I use the breast pump.
Solution 1: One of the reasons can be the too high vacuum level. Maybe you do not need the full vacuum power of the breast pump.
At first use the stimulation or massage mode. If you still feel pain, stop using the breast pump and consult your breastfeeding advisor. If the pump does not come away easily from the breast, it may be necessary to break the vacuum by placing a finger between the breast and the silicone shield.
Solution 2: Use a warm towel to apply warm compress on breast and do massage with a little bit downward gesture for about 5 minutes, then try the pumping again. If you still feel pain, stop using the breast pump and consult your breastfeeding advisor.
Problem: The breast pump does not work.
Solution: Please, first check if you have assembled the breast pump correctly. To prevent interference keep other electric equipment, like mobile phone or laptop, away from the breast pump while expressing. Check the battery and if needed charge it. If it still can not work, please contact to the aftersales service.
Problem: I do not feel any suction.
Solution: Check whether all breast pump connections are secure. Disassemble and assemble the pump (figure III; figure IV). Assembling your breast pump, make sure all pieces are clean and not damaged. While pumping, make sure the breast shield is completely sealed around your breast.
Problem: There is milk overflow.
Solution: Turn off the breast pump. Disassemble the breast pump. Use a damp (not wet) cloth to wipe the breast pump. Clean other components according to clean and sanitize section. When all components are dry, reassemble (figure IV).

Usage and storage conditions
Keep the breast pump out of direct sunlight as prolonged exposure may cause discoloration. Store the breast pump and its accessories in a safe, clean and dry place without direct sunlight and away from heat sources. If the appliance has been stored in a hot or cold environment, place it in the usage environment to let it reach a temperature within the usage conditions (10°C – 30°C) before you use it.

Technical specifications

Model : Wearable breast pump Winnie 31304010038
Pumping power: 165-240/mmHg;
Stimulation power: 90-165/mmHg
Noise limited: <50db;
Fixed time: 30 minutes;
Usage time : 2.5 hours;
Lithium battery: 3.7V, 1500mAh Li-ion;
Charging time: 3 hours;
P rotection against electric shock: Class II;
Power in: 5V 1A, 110-240V 50-60Hz;
Environmental conditions for operation: temperature 5-40°C, relative humidity 10-90%, atmospheric pressure 50kPa~106kPa;
Environmental conditions for storage: temperature 5-40°C, relative humidity 10-90%, atmospheric pressure 50kPa~106kPa;
Adapter input: 110-240V 50~60Hz,
Output : 5V 1A 3.0W;
Capacity 140ml;
Size : 10.5x5x12.7cm,
weight 234g.