Kikkaboo Ttrek Car Seat Instructions

Kikkaboo Ttrek Car Seat

Greetings! It is a great honor that our child safety seat can accompany your child through every day of travel. In order to ensure the safety of your child, please be sure to install and use this child safety seat correctly as described in this manual. And keep the manual properly for reference when needed. If you have any questions when using the products please feel free to contact us.

WARNINGS

1. Please read the manual carefully, because incorrect installation may cause serious injury, in this case, the manufacturer does not take any responsibility.
2. The child safety seat is suitable for children weighing from birth to 36 kg (ie Gr. 0+/1/2/3 , from birth to about 12 years old children.)
3. It is certified that this seat complies with ECE R/44 regulations and can be installed on most vehicles that comply with ECE R/16 or other equivalent standards. However, you should try this child safety seat with your child in your car before purchasing to ensure that this model meets all your needs.
4. Precautions for use For your child’s safety, please read the instructions carefully. carelessness or improper operation can lead to many avoidable injuries.
5. This product can be used by newborns up to 18 kg in the opposite direction of movement (group O+, group I, up to approximately 4 years of age), using the five-point seat belt.
6. This product can also be used for children weighing 15-36 kg (group II, approximately H years, and group Ill, approximately 6-12 years), without using a five-point seat belt on the car seat, but uses the car’s three-point seat belt to secure the child on the seat.
7. Each webbing connected to the child safety seat should be fastened tightly. The webbing restraining the child should be adjusted according to the child’s body, and the webbing must not be twisted.
8. In order to prevent the child from falling out of the safety seat, the child should always be fastened with a safety belt to ensure that the waist belt well restrains the child’s pelvic bones.
9. After a severe accident, the child safety seat should be replaced.
10. For the safety of child safety seats, please do not modify this product by yourself. In order to obtain maximum protection for children; please strictly follow the installation provided by the manufacturer
11. If the surface covering of the product is not a woven fabric, it should be kept away from sunlight, otherwise, the surface will burn children’s skin.
12. It is forbidden to leave children alone in child safety seats when unattended.
13. All baggage and any items prone to impact should be properly secured.
14. This product must be used with a cloth cover. Cloth covers cannot use materials other than those recommended by the manufacturer. Goth covers affect the overall performance of the product.
15. This product is suitable for children weighing Okg-36kg.
16. This product can only be installed in the reverse direction before the child is 9kg, and the seat cannot be installed on the front seat with an airbag. When using forward installation after a child 9kg, try to install the safety seat in the rear seat The front seat wtth an airbag can easily cause the child to be injured.
17. This manual can be stored in the holding bag reserved for the child safety seat during the product service life.
18. This product is not designed for home use, it can only be used in the car, please do not use it at home.
19. When there is no child in the car, and the child safety seat is empty and unused, it must be secured with a car seat belt or stored in the trunk of the car.
20. During the daily use of the vehicle, make sure that all parts of the child safety seat are fixed in the correct position and do not get stuck on the movable seat or door.
21. Before adjusting any movable or adjustable parts of the child safety seat, lift the child out of the safety seat
22. Do not buy second-hand car child safety seats, because you have no way of knowing the history of the use of hand safety seats. It is likely that you have experienced accidents, or key components may have been missing.
23. Do not use any other stress points other than those indicated, otherwise, safety will not be able to protect. Products without certification and modified products are dangerous, and tt is also dangerous if there is no installation instructions provided by the manufacturer nearby.

If the adult seat belt interferes with the position of the main force point of the child restraint system, tt cannot be used. If you have any questions about this, please contact the manufacturer of the child restraint system.

This is a”Universal” child restraint. It is approved to Regulation No. 44, 04 series of amendments, for general use in vehicles and it will fit most, but not all, car seats. A correct fit is likely if the vehicle manufacturer has declared in the vehicle handbook that the vehicle is capable of accepting a”Universal” child restraint for this group. This child restraint has been classified as”Universal” under more stringent conditions than those which applied to earlier designs that do not carry this notice. lfin doubt consult either the child restraint manufacturer or the retailer. This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation No. 44, 04 series of amendments for general use in vehicles fitted with ISOFIX anchorages systems. It will fit vehicles with positions approved as ISOFIX positions (as detailed in the vehicle handbook), depending on the category of the child seat and of the fixture. The mass group and the ISOFIX size class for which this device is intended is: Group I, B1 and Group O+ I, D

GROUPS

1. Universal reverseO+ I group (0-18kg): three-point belt+ five-point harness
2. General Type Group I (9-18kg): Three-point belt+ five-point harness
3. General type II group (15-25kg), group Ill (22-36kg): three-point belt
4. Semi-universal type O+ group (0-13kg): FIX+. top tether+ five-point harness
5. Semi-universal type group I (9-18kg): FIX+three-point belt+five-point harness

INSTALLATION

REAR WARDING FACING
Danger! When the child seat is installed in reverse, if it is hit by the car airbag, it will cause fatal injury or even death of the child. Under no circumstances can this child safety seat be used on a car seat with an airbag activated. Please read the instructions carefully to use the child safety seat correctly. Correct fit  incorrect fit For reference see Figure 2.1.1

• Do not install the child safaty seat at the front seat with an airbag.
• Use this location ONLY with the three-point safety belt.

FORWARDING FACING

1. Diagonal belt
2. Lap belt

Correct fit Incorrect fit For reference (Figure 2.2.2), (Figure 2.2.3), (Figure 2.2.4)
Only suitable if the approved vehicles are fitted with 3-point safety belts, approved to UN/ECE Regulation No. 16 or other equivalent standards.

• Do not install the child safaty seat at the front seat with airbag.
• Use this location ONLY with the three-point safety belt.

PREPARATION INTRODUCTION

ISOFIX
(Figure 3.1.1 )If your vehicle is not equipped with a FIX guide sleeve, please insert the two FIX guide sleeves (02) attached to this child safety seat into the FIX fixing device (01) (Figure 3.1.1).
Tip: The FIX fixture is located between the seat of the vehicle and the backrest.

1. Please read the description of FIX fixing points in the car manufacturer’s manual.
2. Press the release button (13) of FIX, and push FIX forward to release it to the maximum. (Figure 3.1.2)

HEADREST ADJUST WHEN USING 5-POINTS HARNESS (GRO+,|)

1. Press the central adjuster (see 04) and pull out the two shoulder belts (05) at the same time. Please do not pull the shoulder pads ( see 06), try to release the five-point safety belt to a longer position. (Figure 3.2.1) Tip: The outlet end of the shoulder strap cannot be under the child’s shoulder or higher than the height of the ear.
2. Pull up the headrest adjustment ring ( see 07) to adjust the headrest ( see 08) to a suitable position for the child and fix it. (Picture 3.2.2)

HEADREST ADJUST WHEN USING A 3-POINTS BELT (GRII + III)

1. Pull up the headrest adjustment ring (07) to adjust the headrest ( see 08) to a suitable position for the child and fix it. (Picture 3.2.2)
2. The correctly adjusted headrest ( see 08) of the safety seat ensures that the diagonal part ( see 09) of the car seat belt is in the best position, which can provide the best protection for children. The safety seat headrest ( see 08) must be adjusted to approximately two fingers between the child’s shoulder and the safety seat headrest ( see 08). (Figure 3.3.2)

RECLINE AND ROTATION ADJUST

1. Press the adjusting handle ( see 10) in the direction of the arrow to make the chair body (see 11) in the unlocked state, so that the chair body (see 11) can be adjusted to a proper position, release the adjusting handle (10), and the chair body will be automatically locked again. (Picture 3.4. 1) (Figure 3.4.2)
2. Press the adjusting handle ( see 32) in the direction of the arrow to make the chair body ( see 11) in an unlocked state, so that the chair body (see 11) can be adjusted to rotate to a proper position, release the adjusting handle ( see 32), and the chair body will be automatically locked again. (Figure 3.4.3)

INSTRUCTIONS

GROUP + (0-13KG) ISOFIX+ TOP TETHER+5-POINTS HARNESS.

• Please refer to chapter 3.1 to prepare FIX.

• Please ensure that the five-point safety belt is correctly installed on the child safety seat. (Refer to Chapter 8)

• Please refer to section 3.2 to adjust the five-point safety belt.

• Please refer to Chapter 3.4 to adjust the chair body ( see 11) to the most inclined position and in a locked state (not sliding and not rotating).

• Reconfirm that the seat is at the most inclined angle position, that is, the sticker on the seat is aligned with the R position on the base, and then the child seat is installed facing the vehicle. The position in the opposite direction is on the vehicle seat.(Figure4.1.1 ) Note: When using by children in group O+, be sure to adjust the gear to gear
  Note: The FIX connector (see 12) is installed correctly only when the FiX indicator turns completely green.

• Please connect two FIX connectors ( see 12)Insert it into the FIX guide sleeve (see 02) until you hear a “click” sound, at this time the ISOFIX indicator turns green.(figure 4. 1. 1) (figure 4.1.2)

• Push the safety seat firmly until it is close to the back of the vehide seat. (Figure 4.1.3)

• Press and hold the button of the top tether and release the top tether to a proper lenath. (figure 4.1.4)

GROUP 0+ (0-18KG) 3 POINTS BELT+5 POINTS HARNESS

1. Adjust the seat to the “reverse” angle and place it on the car seat in reverse( figure 4. 1.5).
2. Draw the car’s three-point seat belt to the longest (figure 4.1.6)
3. Pass the shoulder strap of the car’s three-point seat belt through the seat belt guide hook on the side of the seat(figure 4.1.7).
4. Pass through the bottom of the seat and tighten the car’s three-point seat belt to its tightest(figure 4. 1.8).
5. Pass the seat belt through the seat belt guide on both sides of the seat and closethe buckle(figure 4. 1.9)

Put the top tether into one of the guid (see 14) on the shoulder (Figure 4.2.1) (Figure 4.2.2)
Please hook the top tether fixing hook to the one recommended in the vehicle user manual. (Picture 4.2.3)
Pull the free end of the top tether to tighten until the indicator of the top tether turns green completely. (Figure 4.2.4) Please install the steps for children to use the fivepoint harness, and place the children to sit.
To use the fivepoint harness, press thebutton to open the five-point safety buckle ( see 19), press the central adjuster (see 04) and pull out the shoulder belt ( see 05). Please do not pull the shoulder pad (see 06). (Figure 4.2.5)
Make sure that the child’s back rests flat on the safety seat. Close the two bolts (see 20) of the fivepoint safety buckle first, and then insert the lock. When it is locked correctly, a “click” sound will be heard. (Figure 4.2.6) (Figure 4.2.7) (Figure 4.2.8)
Pull the central adjustment belt (see 21) until the five-point safety belt is close to the child. (Figure 4.2.9) (Figure 4.3.0)
In order to ensure the safety of your children, please check the following items after each installation: 1. Make sure that the two FIX connectors are correctly connected to the vehicle FIX fixed point, and the FIX connection indication is completely green. 2. Ensure that the child safety seat is tightly attached to the vehice seat. (see 21) 3. Make sure that the upper strap is tight and the upper strap indicator is green. 4. Make sure that the five-point seat belt is close to the child, but not squeezing the child. 5. Make sure that the shoulder strap is adjusted correctly and not twisted. 6. Make sure that the height of the shoulder pads is the same as the height of the child’s shoulders. ( see 06) 7. Make sure that the five-point buckle is locked For reference see: (Figure 4.2.8 (Fiqure 4.2.9) (Figure 4.3.0).

**GROUPI (9-18KG) CHILDREN THREE-POINT BELT + FIVE-POINT HARNESS3-POINTS BELT

• 5-POINTS HARNESS**

• Please make sure that the five-point harness is correctly installed on the child safety seat. (Refer to Chapter 8)
• Please refer to Section 3.2 to adjust the five-point harness.
• Please refer to Section 3.4 to adjust the chair body (see 11) to a proper position and confirm that it is in a locked state (not sliding). Please refer to section 3.5 to adjust the chair body (see 11) to the forward position and confirm that it is in the locked state (cannot be rotated).
• Please place the child safety seat on the vehide seat in the same direction as the vehicle. (Picture 5.1.1)
• Please adjust the child safety seat to the F position. The seat has two positions F and R. The F position is the upright position, and the R position is the inclined position (for directional installation). (Figure 5.1.3)
• Pull out the three-point safety belt of the vehicle, and slide the abdominal belt from the gap between the base (see 22) and the seat body (see 11) into the two base belt guide hooks (see 23) in the direction of the arrow., Insert the vehice seat belt socket into the lock buckle and tighten the vehice seat belt. (Figure 5.1.2)
• Then place the two-vehicle three-point belts C on the back of the sleeping mat, between the back of the child seat and the sleeping mat, (Picture 5.1.4) (Picture 5.1.5)
• Tighten the vehicle seat belts to ensure that there is no slack And distortion. (Picture 5.1.6)
• Please follow the steps of “4. 1.14” for children to use a five-point harness, and place the children to sit.In order to ensure the safety of the child, please check the following items after each installation: 1. Make sure that the vehicle seat belt is not twisted and in a tightened state. 2. Make sure that the child safety seat is dose to the vehicle seat. 3. Make sure that the five-point seat belt is close to the child, but not squeezing the child. 4. Ensure that the adjustment of the shoulder strap is correct and not twisted. 5. Make sure that the height of the shoulder pad is the same as the height of the child’s shoulders. 6. Ensure that the five-point buckle is locked.
• To use the five-point harness, press the button to open the five-point harness (see 19), press the central adjuster (see 04) and pull out the shoulder belt (see 05). Please do not pull the shoulder pad (see 06). (Figure 5.1.7) Make sure that the child’s back rests flat on the safety seat. Close the two bolts (see 20) of the five-point safety buckle first, and then insert the lock.
• When it is locked correctly, you will hear a “click” sound. (Figure 5.1.8) (Figure 5.1.9) (Figure 5.1.10) Pull the central adjustment belt (see 21) until the five-point harness is close to the child. (Fiqure 5.1.11) (Figure 5.1.12)

In order to ensure the safety of the child, please check the following items after each installation:

1. Make sure that the two FIX connectors are correctly connected to the vehicle’s FIX fixed point, and the FIX connection indicator is completely green.
2. Ensure that the child safety seat is tightly attached to the vehicle seat.
3. Make sure the upper strap is tight and the upper strap indicator is green.
4. Make sure that the five-point seat belt is close to the child, but not squeezing the child.
5. Ensure that the adjustment of the shoulder strap is correct and not twisted.
6. Make sure that the height of the shoulder pads is the same as the height of the child’s shoulders.
7. Make sure that the five-point buckle is locked. For reference: (Figure 5.1.10) (Figure 5.1.11) (Figure 5.1.12)

GROUP I (9-18KG) FIX+3-POINT CAR BELT+5-POINT HARNESS

• Please make sure that the five-point harness is correctly installed on the child safety seat. (Refer to Chapter 8)
• Please refer to Section 3.2 to adjust the five-point harness.
• Please refer to Section 3.4 to adjust the chair body (see 11) to a proper position and confirm that it is in a locked state (not sliding).
• Please refer to section 3.5 to adjust the chair body (see 11) to the forward position and confirm that it is in the locked state (cannot be rotated).
• Please place the child safety seat on the vehicle seat in the same direction as the vehicle. (Picture 5.2.1)
• Please adjust the child safety seat to the F position. The seat has two positions F and R. The F position is the upright position, and the R position is the inclined position (for directional installation). (Figure 5.2.4)
• Pull out the three-point safety belt of the vehicle, and slide the abdominal belt from the gap between the base (see 22) and the seat body (see 11) into the two base belt guide hooks (see 23) in the direction of the arrow., Insert the vehicle seat belt socket into the lock buckle and tighten the vehicle seat belt. (Figure 5.2.3 )
• Then place the two vehicle three-point safety belts 13 on the back of the sleeping mat, between the backrest of the child’s seat structure and the sleeping mat, (Picture 5.2.6 ) (Picture 5.2.7 )
• Tighten the vehicle seat belts to ensure No slack or distortion. (Picture 5.2.7)

Please follow the steps of “4.3.0” for children to use five-point safety belts, and place the children to sit. To ensure the safety of the child’s ride. Please pay attention to check the following items after each installation:

1. Ensure that the vehicle seat belt is not twisted and in a tightened state.
2. Make sure that the child safety seat is close to the vehicle seat.
3. Make sure that the five-point seat belt is close to the child, but not squeezing the child.
4. Ensure that the adjustment of the shoulder strap is correct and not twisted.
5. Make sure that the height of the shoulder pad is the same as the height of the child’s shoulders.
6. Ensure that the five-point buckle is locked.

• To use the five-point harness, press the button to open the five-point harness(see 19), press the central adjuster (see 04), and pull out the shoulder belt (see 05).
• Please do not pull the shoulder pad (see 06). (Figure 5.2.8)
• Make sure that the child’s backrest is flat on the safety seat. Close the two bolts (see 20) of the five-point safety buckle first, and then insert the lock. When it is locked correctly, you will hear a “click” sound. (Picture 5.2.9) (Figure 5.2. 10) (Figure 5.2.11 )
• Pull the central adjustment belt (see 21) until the five-point safety belt is close to the child. (Figure 5.2.12) (Figure 5.2.13 )

In order to ensure the safety of the child, please check the following items after each installation:

1. Make sure that the two FIX connectors are correctly connected to the vehicle’s FIX fixed point, and that the FIX connection indicator is completely green.
2. Ensure that the child safety seat is tightly attached to the vehicle seat.
3. Make sure the upper strap is tight and the upper strap indicator is green.
4. Make sure that the five-point seat belt is close to the child, but not squeezing the child.
5. Ensure that the adjustment of the shoulder strap is correct and not twisted.
6. Make sure that the height of the shoulder pads is the same as the height of the child’s shoulders.
7. Make sure that the five-point buckle is locked.

For reference: (Fiqure 5.2.11 ) (Fiqure 5.2.12 ) (Figure 5.2.13 )

GROUP II (15-22KG), GROUP III (22-36KG) CHILDREN IN 3-POINT CAR BELT

• Please ensure that the five-point safety belt of the safety seat is properly hidden. (Refer to Chapter 7)

• Please refer to Chapter 3.3 to adjust the headrest (see 08).

• Please refer to Chapter 3.4 to adjust the chair body (see 12) and confirm that it is in a locked state (not sliding or rotating).

• Place the child safety seat on the vehicle seat in the same direction as the vehicle, and please let the child sit on the safety seat.

• Please adjust the child safety seat to the F-angle position. The seat has two gears F and R, and the F gear is upright. (Picture 5.3.1)

• Pull out the vehicle seat belt around the child, and insert the vehicle seat belt insert plate into the lock buckle (see 24), when it is locked, a “ticking” sound will be issued (Picture 5.3.1)
  warning: Ensure that the vehicle seat belt is not twisted

• Place the vehicle seat belt waist belt (see 25) and abdominal belt (see 26) on the side of the vehicle seat belt buckle (see 24)-under the child’s arm and place it in the belt guide groove (see 27)) Inside. (Figure 5.3.2 )

• Place the other side of the vehicle seat belt belly belt ( see 26) in the belt guide groove (see 28) on the other side. (Figure 5.3.3)

• Put the upper part of the vehicle seat belt shoulder (see 29) into the groove of the belt guide hook (see 30) on the headrest (see 08) to ensure that the vehicle seat belt is not twisted. (Figure 5.3.4) Please make sure that the upper part of the vehicle seat belt (see 29) is placed on the child’s collarbone, not on the child’s neck.
  Tip: If necessary, you can still adjust the headrest now.

In order to ensure the safety of your children, please pay attention to the following items after each installation:

1. Make sure that the waist belt (see 25) and abdominal belt (see 26) on the side of the car seat belt buckle (see 24) are placed in the belt guide groove (see 27).
2. Make sure that the other side of the vehicle seat belt belly belt (see 26) is placed in the belt guide groove (see 28) on the other side.
3. Ensure that the upper part of the vehicle seat belt shoulder strap (see 29) is placed in the groove with the hook (see 30) on the headrest (see 08).
4. Ensure that the upper part of the vehicle seat belt shoulder strap (see 29) is placed on the child’s collarbone, not on the child’s neck.
5. Ensure that the vehicle seat belt is not twisted and in a tightened state.

DISASSEMBLY OF SAFETY SEAT

Toggle the FIX release switch to unlock the FIX. When the button indicator turns from green to red, it means that the FiX is in the unlocked state. Fold the FIX into the base. Red indicator means FIX Unlocked Green indicator means FIX Locked > For reference (figure 6.1 )

CLEANING AND MAINTENANCE

The cloth cover of the child safety seat can be removed and washed. Disassembly of the cloth cover:

1. Ad just the headrest to the highest position.
2. Remove the headrest cloth cover.
3. Remove the chair body cover. For reference ( Figure 7.1 ) Hand wash with water temperature not exceeding 40°C. Use neutral detergent. Only hand wash, do not bleach, dry flat, do not turn to dry, do not iron, do not dry clean, do not use bleach or furniture detergent.

APPLICABLE VEHICLE LIST

KIKKA BOO Bulgaria
Vasil Levski 121 Plovdiv, Bulgaria
office@kikkaboo.com

KIKKA BOO Spain
Calle Sos Del Rey Catolico, 16, 7C Granada, Spain
office@kikkaboo.com

www.kikkaboo.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>