kikkaboo 31005020044 Calmo Bouncer Instruction Manual
- June 12, 2024
- kikkaboo
Table of Contents
kikkaboo 31005020044 Calmo Bouncer
- WARNING Never leave the child unattended.
- WARNING Do not use the reclined cradle once your child can sit unaided.
- WARNING This reclined cradle is not intended for prolonged periods of sleeping. WARNING It is dangerous to use this reclined cradle on an elevated surface, e.g. a table.
- WARNING Always use the restraint system.
- This reclined cradle is suitable for one child from birth to a maximum weight of 9kg.
- This reclined cradle does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed.
- Do not use the reclined cradle if any components are broken or missing.
- Do not use accessories or replacement parts other than those approved by the manufacturer.
This product complies with EN 12790:2009
PARTS
- Seat x 1, Base x1
ASSEMBLY
- Step 1: Turn outwards the stand.
- Step 2: Rotate the seat support to the locking position.Rotate untill you here “click” at both side.
- Step 3: Slide the seat support to the bouncer base. Slide in untill you here “click” at both side.
REMOVE SEATPAD
- Step 1: Open the velcro cover.
- Step 2: Unzip the seat pad, untill the seat pad is completely removed. Assembly the seat pad in reverse order of remove the seatpad.
FUNCTIONS
- Backrest adjustment. Press the button on both sides of the seat to adjust the backrest angle. There are 2positions.
- Rocking mode(A) and Stand mode(B).
HOW TO FOLD
- Remove the seat
- Step 1: Press the lower button on the seat support internal side.
- Step 2: And at the same time slide out the seat support. Remove one side from the other side.
- Fold the seat support
- Step 1: Press the upper button on the seat support’s internal side.
- Step 2: And at the same time, press the round button at the seat support outer side. Apply the above action at both sides of the seat , and keep these four buttons at pressed condition, then roate the seat support towards the backrest tube.
CLEANING AND MAINTENANCE
This product requires regular maintenance to keep it in good working order. Regularly check all parts of the product to ensure that they are operating correctly and for signs of wear or damage. Only replacement parts supplied or recommended by the manufacturer should be used.
- Before using the product for the first time, please check whether all parts are well fixed or whether the tightening mechanism are well tightened.
- Regularly check the condition of the main parts and locking mechanisms, and whether they are in good condition. If you establish damage, please stop using the product until the broken part is replaced. Do not make repair of the product by yourself, but contact with authorized repair shop or the sales manager, which you bought the product from. Otherwise, your warranty will be canceled.
- Do not use accessories or replacement parts other than those, approved by the manufacturer.
- The fabric of the product must be cleaned with warm water and mild soap. Refer to care label on the product for cleaning instructions for fabrics.
- After cleaning, leave the product to dry well before using it. It is absolutely forbidden to fold it and storage it before it is completely dry.
- Do not use strong cleaning agents, whiteners or agents with abrasive particles for cleaning the product. It is forbidden its clean in washing machine, dryers, through dry cleaning whitening and centrifugation.
- Clean plastic parts with soft towel and dry with dry soft towel.
- Clean metal or plastic components with mild detergent and warm water.
INSTRUCTIONS FOR STORAGE
- When you do not use the reclined cradle, please, store it on a dry, windy, and safe place. Do not store the product in a dusty, moisture room with very low or very high temperatures.
- Storage the product away from children.
- Storage the product in a dry and clean place. Do not expose the product the direct sunlight, rain, moisture or sharp temperatures.
Attention! Keep away from fire. Do not store the product near heat sources or in direct sunlight for a long time to prevent deformation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>