GE40L08BSM Gallon Side Port Lowboy Electric Water Heater Owner’s Manual
- June 1, 2024
- GE
Table of Contents
GE40L08BSM
GE® 36 Gallon Side Port Lowboy Electric Water Heater
GE40L08BSM Gallon Side Port Lowboy Electric Water Heater
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
LOCAL INSTALLATION REGULATIONS:
This water heater must be installed in accordance with these instructions,
local codes, utility codes, utility company requirements or, in the absence of
local codes, the latest edition of the National Electrical Code. It is
available from some local libraries or can be purchased from the National Fire
Preventions Association, Batterymarch park, Quincy, MA 02169 as booklet
ANSI/NFPA 70.
INSTALLATION INFORMATION: For complete information, see installation
instruction packed with your water heater.
POWER REQUIREMENTS: Check the markings on the rating plate of the water
heater to be certain the power supply corresponds to the water heater
requirements.
LOCATION: Locate the water heater in a clean dry area as near as
practical to the area of the greatest heated water demand. Long uninsulated
hot water lines can waste energy and water.
REQUIRED CLEARANCES: T here must be sufficient clearance between any
object and the top, rear and sides of the water heater in the event service is
needed. The controls and drain at front of unit must have clear access for
operation and service. Installations that require minimal clearance on the
sides or rear of the water heater for earthquake straps are also acceptable.
In these cases, additional clearance should be provided on the opposite side
of the unit to allow for service access.
Above illustration intended for dimensional reference
only. Refer to photograph for actual product appearance
FEATURES AND BENEFITS
Side Port Lowboy – Make the most of tight spaces with a water heater that
fits where height is a concern.
Household Size – Provide hot water for the whole family of 2 to 4
persons.
Quick Recovery – Two 5500W heating elements quickly increase water
temperature for hot water when you need it.
High First Hour Delivery – Live comfortably with this best in class unit
that delivers 63 gallons of hot water in the first hour (Measured through DOE
First Hour Rating).
Inlet Tube – Replenishes water from the bottom of the tank to maximize
hot water delivery.
Easy Set Up – Replace your old water heater quickly and easily using
standard water and electrical connections.
Anode Rod – Durable design offers long-lasting protection against
corrosion.
Drain Valve – Rust-proof construction can be counted on to provide long-
lasting service.
Adjustable Thermostat – Change temperature to your desired setting.
Warranty – 8-year limited Parts Warranty*.
Model GE40L08BSM – Diamond Gray
- See written warranty for full details
GE40L08BSM
| Rated capacity (gallons) | 36 |
|---|---|
| Nominal capacity | 36 |
| Product application | Residential |
FEATURES
Family size*| 2 – 4
Control type| Thermostat
Temperature setting| 90-150° F
Temperature setting factory default| 120° F
Drain valve type| Plastic
WEIGHTS & DIMENSIONS
Height to water connection (in.)| 33-5/8
Tank dimensions (diameter x height) (in.)| 27 x 32-3/4
Connection sizes—hot water outlet (MNPT)| 3/4”
Connection sizes—hot water intlet (MNPT)| 3/4”
POWER/RATINGS
Electrical circuit direct wired| 5,500
Heating elements| 5,500
Heating element density| 0.92
GE40L08BSM01| 63
Lower element (watts)| 240V/60Hz/30A
Upper element (watts)| min. dedicated
Energy factor| 20-125 PSI
First Hour Rating (FHR) (gallons)| Copper
Operating water pressure| High density
WARRANTY
Parts warranty| 8 years
- Household sizing based on back-to-back showers, 8 minutes long.
For answers to your GE Profile™, or GE Appliances product questions,visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Listed by Underwriters Laboratories See
http://info.nsf.org/Certified/Lead_Content/
for specific model listing
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>