RENPHO RWME01 Head and Eye Massager User Manual
- June 1, 2024
- Renpho
Table of Contents
RENPHO RWME01 Head and Eye Massager
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS CAREFULLY BEFORE USE.
- This device is intended for personal care use only and not for medical or commercial purposes.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the device.
- Cleaning and maintenance should not be conducted by children.
DANGER – To reduce the risk of electric shock:
- Never use pins or other metallic fasteners with this device.
- Do not use the device with wet hands or submerge the device in water, or any liquid.
WARNING – To reduce the risk of burns, fire, or injury to persons:
- Please consult a doctor before use if you fit into any of the following user groups:
- Persons who have undergone eye surgery or eye conditions such as glaucoma, cataracts, and retinal detachment
- The elderly
- Pregnant or postpartum women
- Persons allergic to suede or milk fibre
- Persons with skin infections, sensitivity, redness, and/or burns on the skin
- Persons with any swelling or wound around the eye area
- Persons using a pacemaker or other implantable medical devices
- Persons with a heart condition, malignant tumours, or other serious health conditions
- Persons undergoing medical treatment
- Persons with high or abnormal blood pressure
- Remove contact lenses, glasses, false eyelashes, hairpins, and any other accessories before use.
- If you experience any discomfort during use, stop using the device immediately.
- Do not use the device under blankets, pillows, or any other object that can cause excessive heating.
- Do not use the device if it is not working properly, has been damaged, or dropped into water.
- Do not use the device while driving, walking, or running.
- Only use the charger (DC 5V 2A, not included) to recharge the device.
- Avoid contact with sharp objects.
- Be careful when using heated surfaces, as they may cause serious burns. Do not use over insensitive skin areas or on persons with poor circulation. Children or incapacitated persons should not use the heat function unattended.
- High temperatures may cause burns to occur regardless of the control setting. Do not use the device on infants or persons who are with disabilities or unconscious.
- Check frequently where the skin is in contact with the heated area to reduce the risk of blistering.
- This device contains a non-replaceable battery. When the battery reaches its end, the device should be properly disposed of.
- Do not expose the device or battery to excessive temperatures. SAVE THESE INSTRUCTIONS
WHAT’S IN THE BOX
- Eyeris Masc x1
- USB-C Charging Cable x1
- Storage Bag x1
ABOUT YOUR EYERIS MASC
- Elastic Headband
- Pressure Module
- Main Control Unit
- Adjustable Buckles
- Charging Port
- Pressure Button (Indicator)
- Heat / Silent Mode Button (Indicator)
- Power / Timer Button (Indicator)
- Volume / Next Track Button (Indicator)
CHARGING YOUR EYERIS MASC
fully charge the device before the char Gower indicator turning.
Note
- Do not use the device while charging
- When the power indicator flashes red slowly, followed by a voice broadcast, and charge the device.
- When batteries are depleted, the device will broadcast and turn off automatically.
WEARING YOUR EYERIS MASC
- Before wearing, remove makeup and any eye accessories (e.g. eyeglasses, false eyelashes, etc.).
- Align the nose contour with that of the massager. Wear the device and adjust the headband to ensure a comfortable fit and effective light blocking.
FCC Regulatory Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used by the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
ISED Regulatory compliance
This device contains licence-exempt transmitters that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
USING YOUR EYERIS MASC
Note
- Memory function: The device automatically recalls the last set of massage modes, pressure level, built-in music, auto-off timer, and warmth level once turned on again.
- Auto-off timer: Once the timer is set, the device will operate for the selected duration and then automatically shut off, followed by a voice broadcast.
- In silent mode, the voice broadcast and included music will be disabled. The music playing from your smartphone will be paused but can be resumed through your smartphone.
CONNECTING TO YOUR PLAYLIST
- Turn on the device and enable the wireless setting on your smartphone.
- Search for “R-WME01” via your wireless setting and connect to play your music playlist through the device.
- Once connected successfully, the volume indicator will turn solid blue, followed by a voice prompt.
Note:
Once paired successfully, the device will be automatically connected to your smartphone next time if the wireless setting is enabled.
CARE & MAINTENANCE
- Turn off the device and allow it to cool down before cleaning or storing,
- Wipe the device surface with a soft cotton cloth slightly dampened with mild detergent. Do not submerge it in water or use bleach or corrosive cleaners.
- Ensure the device is clean and dry before storing. Store it in a cool, dry place, away from direct sunlight, moisture, heat, and corrosive gases.
- If the device has not been used for over 3 months, charge it periodically to prolong its lifespan.
- Do not disassemble or repair the device by yourself, as this may cause damage and void the manufacturer’s warranty.
TROUBLESHOOTING GUIDE
TECHNICAL SPECIFICATIONS
- Product Name: Head and Eye Massager
- Model: R-WME01
- Input: 5V -=: 2A
- Battery Capacity: 1500mAh 5.55Wh
- Auto-off Timer: 15 / 20 / 30 min
WARRANTY POLICY
Your RENPHO product purchase is covered by a one-year limited manufacturer
warranty from the date of delivery.
For warranty terms and conditions, please visit: https://renpho.com/pages
/warranty-terms-and-conditions
Note: Product registration is not required for the warranty. If you choose
not to register your product, it will not diminish the product warranty.
CUSTOMER SERVICE
Please feel free to contact us if you have any questions or concerns. RENPHO
Customer Service Team guarantees a quick response and hassle-free solutions to
any issue you may have within business hours.
< 1(844) 417-0149(US ONLY)
Monday-Friday 9:00 AM-4:30 PM
1800 MY RENPHO (1800 69 7367) (AU ONLY)
Monday-Friday 9:00 AM-6:00 PM (AEST)
support@renpho.com(US&CA)
support-au@renpho.com (AU)
For defective products or the return of items, please contact us with your order number within the specified warranty period. DO NOT dispose of any product parts as they may be required for inspection/repair.
Us Importer: JOICOM CORPORATION
14129 The Merge Street, Building 3 Unit A, Eastvale, CA 92880
Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd.
No. 810-C063, 8th Floor, Xiangbin International Financial Centre
No.18, West Free Trade Street, China Special Economic Zone
Qianhai Bay. Shenzhen, Guangdong Province,518000 China