RENPHO RF-BM066 Massage Cushion User Manual

May 15, 2024
Renpho

RENPHO RF-BM066 Massage Cushion

Specifications

  • Model: RF-BM066
  • Contents: Massage Cushion x 1, Adapter x 1, User Manual x 1
  • Features: Neck Massage Section, Back Massage Section, Seat Vibration Section, Handheld Controller

Product Usage Instructions

Setup

  1. Unbox the RENPHO Massage Cushion and ensure all components are present.
  2. Connect the adapter to the cushion and plug it into a power source.
  3. Place the cushion on a sturdy surface such as a chair or sofa.

Operating Instructions
Use the handheld controller to activate the neck massage function. Adjust the intensity and speed using the corresponding buttons.

Back Massage
Choose between FULL/LOWER/UPPER back massage mode by pressing the BACK AREA button. Control the massage nodes’ movement with the UP/DOWN button in spot massage mode. Adjust speed with the Speed button. allow the unit to cool down before using again.

Frequently Asked Questions (FAQ

  1. Q: How do I clean the cushion?
    A: Use a soft, damp cloth to wipe the cushion gently. Do not use harsh chemicals or immerse the cushion in water.

  2. Q: Can I use the cushion without activating the heat function?
    A: Yes, you can use the cushion for massages without turning on the heat function if desired.

  3. Q: How often should I use the massage cushion?
    A: You can use the massage cushion as needed for muscle relaxation and relief. However, avoid prolonged continuous use to prevent overstimulation of muscles.

Massage Cushion

Model:RF-BM066

Thank you for your purchase of RENPHO Massage Cushion. The massager offers a powerful massage. While enjoying muscle and body relief, you should use it with care and safety in mind. To ensure safety and avoid any property damage, please read this manual carefully and use as indicated. Non-compliance may cause serious injuries or death and/or severe property damage.

Important Safety Instructions

READ ALL INSTRUCTIONS CAREFULLY BEFORE USING.
When using the appliance, basic precautions should always be followed, including the following:
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or cognitive capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Children should not play with the appliance.
Cleaning and user maintenance shall not be done by children. This appliance should not be used for any medical purposes. It is designed for household use only.

DANGER – To reduce the risk of electric shock

  1. Always unplug the appliance from the electrical outlet immediately after using and before cleaning.
  2. NEVER use pins or other metallic fasteners with this appliance.
  3. Keep the power cord and the device away from heat, hot surfaces, damp and liquids. Avoid touching the plug or power switch with wet hands, or when you are standing in water.
  4. Ensure that the electrical voltage and frequency of the circuit correspond to those indicated on the adapter.

WARNING -To reduce the risk of fire, electric shock, or injury to persons, please follow the instructions below:

  1. Consult a doctor before using the device, if you fall into any of the following user groups:
    • Pregnant or lying-in women
    • Children
    • Elderly (over 65 years old)
    • Persons using a pacemaker or other implantable medical device
    • Persons with heart disease, malignant tumors, or other serious health conditions
    • Persons receiving medical treatment or feel discomfort during massages
    • Persons suffering from diabetes, or thrombosis, varicose veins
    • Persons with high or abnormal blood pressure
    • Persons with skin infections, sensitivity, redness, wounds, and/or burns on the skin
  2. Never cover the device when it is in operation.
  3. It is prohibited for non-professional personnel to repair the device or replace parts.
  4. If you feel unwell or in any unusual discomfort, please stop using the device immediately.
  5. An appliance should NEVER be left unattended when plugged in.
  6. Close supervision is necessary when this device is used by, on, or near children, invalids, or disabled persons.
  7. DO NOT use attachments not recommended by RENPHO.
  8. NEVER operate this device if it has a damaged cord or plug, if it is not working properly, has been damaged, or dropped into water.
  9. DO NOT use this device in close proximity to loose clothing, jewelry, or long hair.
  10. DO NOT operate in moist or wet conditions.
  11. DO NOT operate where aerosol (spray) products are being used or where oxygen is being administered.
  12. DO NOT fully cover the device while massaging. Excessive heating can occur and cause fire, electric shock, or injury to persons.
  13. DO NOT carry this device by supply cord or use cord as a handle.
  14. To disconnect, turn off the device before removing the plug from the outlet.
  15. DO NOT use this device for more than 30 minutes at a time. Extensive use could lead to the product’s excessive heating and shorter life. Should this occur, discontinue use and allow the unit to cool before operating.
  16. NEVER use this device directly on the skin, swollen or inflamed areas, or skin eruptions.
  17. Never use this device while driving, sleeping, or ingesting substances that reduce reaction times (e.g. painkiller medications, alcohol).
  18. Avoid creasing the device.
  19. DO NOT sit or stand on the massage (back) part of the device. The device should only be used when attached to a chair with the back in the vertical position.
  20. When the device is working, do not touch the moving massage mechanism with any body part except your back.
  21. To avoid pinching, DO NOT lean on the back massage mechanism in the cushion when adjusting your body position.
  22. Caution is needed when using it on upholstered furniture.
  23. The device has a heated surface. Persons insensitive to heat must be careful when using the appliance.
  24. Use heated surfaces carefully. May cause serious burns. The unattended use of heat by children or incapacitated persons may be dangerous.
  25. Temperatures sufficiently high to cause burns may occur regardless of the control setting. Do not use on an infant or invalid or on a sleeping or unconscious person. Do not use it on sensitive skin or on a person with poor blood circulation. Check the skin in contact with the heated area of the appliance frequently to reduce the risk of blistering.

About the RENPHO Massage Cushion

What’s in the box RENPHO Massage Cushion x 1 Adapter x 1
User Manual x 1

Product Introduction

RENPHO-RF-BM066-Massage-Cushion-1
RENPHO-RF-BM066-Massage-Cushion-2

Using the RENPHO Massage Cushion

Important tips before use

  • It is not recommended to use this Massage Cushion in the driver’s seat of a vehicle.
  • It is not recommended to lay Massage Cushion completely horizontal when in operation.

Preparation

  • Place the massager on a recliner, sofa seat or office chair, fasten the straps and secure the massager to the chair.
  • When the adapter is plugged in, the power button on the controller will flash red. The back massage nodes will move and return to the default position and once complete, the red light will go out and enter standby mode. You can press the power button now to turn the massager on or you can just press the power button and use all functions after powered on without waiting for the reset process to be complete.

Operation Instruction

  1. RENPHO-RF-BM066-Massage-Cushion-3 Press the “Power” Button to turn on the massager; the indicator light will turn red indicating the massager is on. The Neck Kneading, Full Back Massage functions and the Heating function of neck and back are on by default. Seat Vibration function is off. The default timer is 15 minutes. The indicators on the controller will remain in the “on” status accordingly.
  2. Activate the functions according to your preferences.

Power
Press to turn the massager on (indicator light will turn on). Press again to turn off (flashing light indicates that the massager nodes are returning to its reset configuration; the lights will turn off once reset is complete). During the reset process, there is no need to wait until the reset is complete to turn the massager on. You can press this button to turn it on immediately.

Neck Massage
“MASSAGE” button: Press this button to turn on the neck massage nodes (indicator light will turn on). Press this button again to turn the neck massage nodes off (indicator light will turn off).
“Up/Down” button: Press and hold this button to have the neck massage nodes move up/down (indicator light will turn on). The massage nodes will move upward/downward to the highest/lowest point, and then stop (indicator light will flash). Release the button to have the neck massage nodes stop moving and start massaging at the specified point (indicator light will turn off).
Regardless of whether the neck massage is on or off, the position of the neck massage nodes can be adjusted.

Back Area Massage
“BACK AREA” button: Press this button to turn on/off the back massage function and switch among FULL/LOWER/UPPER back massage mode. (Corresponding indicator light will turn on).
The back massage nodes will stop once the reset is complete. During the reset process, the back massage could be powered on by pressing “BACK AREA” or “SPOT” button.

Back Spot Massage
“SPOT” button: Press this button to activate spot massage mode
(the massage nodes will move up and down on the specified spot; indicator light will turn on). Press it again to turn off the back spot massage mode (indicator light will turn off).
The back massage nodes will stop once resetting is complete. During the reset process, the back massage could be powered on by pressing this button.
“UP” button: When the spot massage mode is on, press and hold this button to have the back massage nodes move up.

“DOWN” button:
When the spot massage mode is on, press and hold this button to have the back massage nodes move down. Note: When “UP/DOWN” button is released, the massage nodes will massage the specified area. When the massage nodes reach the lowest/highest point, this button will flash to indicate that the lowest/highest point has been reached. They will work only when the spot massage mode is on.

“Speed” button:
Press this button to select and cycle through L/M /H massage speed (corresponding indicator light will turn on). When powering off the back massage function, the speed indicator light will turn off. This button will work only when the Back Massage or Spot Massage is on.

Seat Vibration
“Seat Vibration” button: Press this button to turn on/off the seat vibration function and switch among L/M/H. The default vibration intensity is L.

Timer Function
“TIME” button: Press this button to select and cycle through 15 (Default) /20/25 minutes of massage (corresponding indicator light will turn on).

Heating Function
“HEAT” button: Press to activate the heating function of the neck massage and the back massage (indicator light will turn on); press again to turn it off (indicator light will turn off).
Note: Heating function will work only when the Neck or Back Massage is on.

Product Care and Maintenance

  • Place the massage cushion in a safe, cool, and dry place when not in use.
  • Always unplug the massager cushion prior to cleaning.
  • After use, wipe the massager cushion with a soft, damp cloth using non-abrasive cleaners. If necessary, clean with a sterilizer.
  • DO NOT submerge the massager in water or any other liquid.
  • Keep away from all solvents and harsh detergents.
  • DO NOT attempt to repair this massager. There are no user-serviceable parts.

Troubleshooting

PROBLEM CAUSE SOLUTION
Massager doesn’t turn on. Disconnected power or loose adapter connection
causing poor contact. Reconnect the adapter and re-plug to the power source.
Power is off. Press the Power button to turn on the massager.
**** Massager shuts off automatically. Massager shuts off when time is up.

Press the Power button to turn on the massager.
The product is overloaded, activating overload protection.| Restart the massager after alleviating the load.
The motor auto shuts off due to the device being on too long, activating overheating protection.| Use the massager after the motor cools off (approximately 30 minutes).


The height is not ideal.

| Neck massage nodes have not been adjusted to a proper height.| Adjust the height of the neck massage nodes following according to the “Operation Guide”.
PROBLEM| CAUSE| SOLUTION
---|---|---
Pain is felt during the use.| Direct skin contact with the product directly.| Avoid direct contact with the skin.
Do not lean on themassager too closely.
Heating function does not work.|

  1. Heating function hasn’t been activated.
  2. The heat function is manufactured according to International safetystandards, which limits how fast the product can heat up. It needs a few minutes to warm up after activating heating function.

|

  1. Press the Heating button to activate this function (indicator light will turn on).
  2. Please wait 2-3 minutes after activating this function.

Unsatisfied experience of using this product in the car.| This product is not designed for car seat.| **** Don’t use it in the car.
If you encounter any other problems, contact: [email protected]

Specifications

  • Product Name: RENPHO Massage Cushion
  • Input: 12V 5A
  • Rated Power: 60W
  • Dimension (Folded): 30.7in (L) x 16.9in (W) x 7. 5in (H)  78.0cm (L) x 43.0cm (W) x 19.0cm (H) Net Weight: 11.24 lbs (5.1 Kg)
  • Auto-off Timer: 15/20/25 Minutes
Symbol Definition
Direct Current

Warranty Policy

Your RENPHO product purchase is covered by a one-year limited manufacturer warranty from the date of delivery.

For warranty terms and conditions, please visit
https://renpho.com/pages/warranty-terms-and-conditions
Note: Product registration is not required for the warranty. If you choose not to register your product, it will not diminish the product warranty.

Customer Service

Please feel free to contact us if you have any questions or concerns. RENPHO Customer Service Team guarantees a quick response and hassle-free solutions to any issue you may have within business hours.

  • Tel: +44(0)7434-666088 (UK ONLY)
  • Monday-Friday 9:00AM-5:00PM(GMT)
  • Email: [email protected](UK&EU)

*For defective products or the return of items, please contact us with your order number within the specified warranty period. DO NOT dispose of any product parts as they may be required for inspection/repair.

Notice : This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Unit 58B, Bordon Enterprise Park, Budds Lane, Bordon, Hampshire, GU35 0JE, U.K.

UK Importer: EEON(UK)LIMITED
Kemp House 160 City Road, London, EC1V 2NX, United Kingdom

EU Importer: Renpho GmbH

Lehmweg 17, 20251 Hamburg Hoheluft-Ost, Deutschland, Germany
Tel:+49 40 23969285 (DE ONLY

Richers & Vision Ltd.
Unit 58B, Bordon Enterprise Park, Budds Lane, Bordon, Hampshire, GU35 0JE, U.K

C &E Connection E-Commerce (DE) GmbH
Zum Linnegraben 20, 65933, Frankfurt am Main, Germany

Manufacturer: Shenzhen Ruiyi Business Technology Co., Ltd.

  • Email: [email protected]
  • Richers & Vision Ltd.
  • Unit 58B, Bordon Enterprise Park, Budds Lane, Bordon, Hampshire,
  • GU35 0JE, U.K.
  • Tel:+49 40 23969285 (DE ONLY)

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals