Salter 9221 BK3R Electronic Bathroom Scale Instruction Guide
- June 3, 2024
- SALTER
Table of Contents
- Salter 9221 BK3R Electronic Bathroom Scale
- Specifications
- Introduction
- PREPARING YOUR SCALE
- INITIALISING YOUR SCALE
- OPERATING YOUR SCALE
- TROUBLESHOOTING GUIDE
- BATTERY DIRECTIVE
- ADVICE TO THE USER
- THE WARRANTY
- TERMS AND CONDITIONS
- Frequently Asked Questions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Salter 9221 BK3R Electronic Bathroom Scale
Specifications
- BRAND: SALTER
- COLOR: black
- WEIGHT LIMIT: 180 Kilograms
- MATERIAL: Tempered Glass
- ITEM WEIGHT: 75 Kilograms
- MAXIMUM CAPACITY: 180Kg
- CHARGING TIME: 90 minutes
- MEASUREMENT ACCURACY: 1kg
- ITEM WEIGHT: 86 pounds
- PRODUCT DIMENSIONS: 97 x 1.1 x 12.76 inches
Introduction
This Eco Rechargeable Electronic Scale from Salter is backed by the Sea Life Trust to save the world’s oceans. Never again worry about replacing batteries; just use the included USB cable to charge the compact bathroom scale. The black scale’s platform is made of curved toughened glass, and the hidden backlit display shows your measurements up to 180 kg. Bring something special and fashionable to your bathroom.
GB ECO IS RECHARGEABLE! This Salter scale has been designed with the environment in mind. It uses a lifetime rechargeable battery that is intended to last for the duration of the life of the product. No disposable batteries are required – ever!
PREPARING YOUR SCALE
- Ensure the scale is switched to the ON position. Fig 1
- If Lo is displayed recharge, the scale using the micro USB cable.
- Flashing —- indicate charging.
- Full charging takes approximately 1.5 hours and should last 2-3 months dependent on use.
INITIALISING YOUR SCALE
- Position scale on a firm flat surface. This scale is not suitable for use on carpet.
- Press the platform center and remove your foot.
- ‘0.0’ will be displayed.
- Select kg, st or lb. weight mode by the switch on the underside of the scale.
- The scale will switch off and is now ready for use. This initialization process must be repeated if the scale is moved. At all other times step straight on the scale.
OPERATING YOUR SCALE
- Position scale on a firm flat surface.
- Step on and stand very still while the scale computes your weight.
- Your weight will be displayed.
- Step off. Your weight will be displayed for a few seconds.
- The scale will switch off.
ADVICE FOR USE AND CARE
- Always weigh yourself on the same scale placed on the same floor surface. Do not compare weight readings from one scale to another as some differences will exist due to manufacturing tolerances.
- Placing your scale on a hard, even floor will ensure the greatest accuracy and repeatability.
- Weigh yourself at the same time each day, before meals and without footwear. First thing in the morning is a good time.
- Your scale rounds up or down to the nearest increment. If you weigh yourself twice and get two different readings, your weight lies between the two.
- Clean your scale with a damp cloth. Do not use chemical cleaning agents. Do not allow your scale to become saturated with water as this can damage the electronics.
- Treat your scale with care – it is a precision instrument. Do not drop it or jump on it.
- Caution: the platform may become slippery when wet.
TROUBLESHOOTING GUIDE
If you experience any difficulty in the use of your scale:
- Check that you have selected your preference of stone/pounds, kilograms or pounds
- Check that the scale is on a flat, level floor and not touching against a wall. This scale is not suitable for use on carpet
- If when you use the scale there is no display check the on/off switch is on the on position and recharge the scale
- If “ERR’ is displayed the scale has been overloaded.
WEEE EXPLANATION
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
BATTERY DIRECTIVE
This scale uses a lifetime rechargeable battery. At the end of the product’s life follow the instruction in Fig 2 & Fig 3 to safely remove the battery before disposing of it separately from the scales. This symbol indicates that batteries must not be disposed of in the domestic waste as they contain substances which can be damaging to the environment and health. Please dispose of batteries in designated collection points.
ELECTROMAGNETIC COMPATIBILITY
This product is intended for domestic use.
ADVICE TO THE USER
This product is a sensitive electronic instrument and as such may temporarily be affected by Radio Transmitting Devices being used in close proximity to it (such as Mobile Phones, Walkie Talkies, CB Radios, Radio Model Controllers, and some Microwave Ovens, etc.) Additionally, extreme levels of Electrostatic Interference may cause this product to temporarily malfunction. In such case it may be necessary to remove and re-install the battery to re-establish normal working. If the problem persists then contact your local agent.
15 YEAR GUARANTEE
FKA Brands Ltd guarantees this product from defect in material and workmanship for a period of 15 years from the date of purchase, except as noted below. This FKA Brands Ltd product guarantee does not cover damage caused by misuse or abuse; accident; the attachment of any unauthorized accessory; alteration to the product; or any other conditions whatsoever that are beyond the control of FKA Brands Ltd. This guarantee is effective only if the product is purchased and operated in the UK / EU. A product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and / or authorized, or repair of products damaged by these modifications is not covered under this guarantee. FKA Brands Ltd shall not be responsible for any type of incidental, consequential or special damages. To obtain guarantee service on your product, return the product post-paid to your local service center along with your dated sales receipt (as proof of purchase). Upon receipt, FKA Brands Ltd will repair or replace, as appropriate, your product and return it to you, post- paid. Guarantee is solely through Salter Service Centre. Service of this product by anyone other than the Salter Service Centre voids the guarantee.
This guarantee does not affect your statutory rights. For your local Salter Service Centre, go to www.salterhousewares.co.uk/servicecentres
15 YEAR LIMITED WARRANTY (AUSTRALIA & NEW ZEALAND)
We or us means HoMedics Australia Pty Ltd ACN 31 103 985 717 and our contact details are set out at the end of this warranty;
You means the purchaser or the original end-user of the Goods. You may be a domestic user or a professional user;
Supplier means the authorized distributor or retailer of the Goods that sold you the Goods in Australia and New Zealand; and Goods means the product or equipment which was accompanied by this warranty and purchased in Australia and New Zealand.
FOR AUSTRALIA:
Our Goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled, subject to the provisions of the Australian Consumer Law, to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled, subject to the provisions of the Australian Consumer Law, to have the Goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This is not a complete statement of your legal rights as a consumer.
FOR NEW ZEALAND:
Our Goods come with guarantees that cannot be excluded under the Consumer Guarantees Act 1993. This guarantee applies in addition to the conditions and guarantees implied by that legislation.
THE WARRANTY
HoMedics sells its products with the intent that they are free of defects in manufacture and workmanship under normal use and service. In the unlikely event that your HoMedics product proves to be faulty within 15 years from the date of purchase due to workmanship or materials only, we will replace it at our own expense, subject to the terms and conditions of this guarantee. The warranty period is limited to 3 months from the date of purchase for products used commercially/professionally.
TERMS AND CONDITIONS
In addition to the rights and remedies that you have under the Australian Consumer Law, Consumer Guarantees Act of New Zealand or any other applicable law and without excluding such rights and remedies warranty against defects:
- The Goods are designed to withstand the rigors of normal household use and are manufactured to the highest standards using the highest quality components. Whilst unlikely, if, during the first 15 Years (3 months commercial use) from their date of purchase from the Supplier (Warranty Period), the Goods prove defective by reason of improper workmanship or materials and none of your statutory rights or remedies apply, we will replace the Goods, subject to the terms and conditions of this warranty.
- We do not have to replace the Goods under this Additional Warranty if the
- Goods have been damaged due to misuse or abuse, accident, the attachment of any unauthorized accessory, alteration to the product, improper installation, unauthorized repairs or modifications, improper use of electrical/power supply, loss of power, malfunction of damage of an operating part from failure to provide manufacturer’s recommended maintenance, transportation damage, theft, neglect, vandalism, environmental conditions or any other conditions whatsoever that are beyond the control of HoMedics.
- This Warranty does not extend to the purchase of used, repaired or second-hand products or to products not imported or supplied by HoMedics Australia Pty Ltd, including but not limited to those sold on offshore internet auction sites.
- This Warranty extends only to consumers and does not extend to Suppliers.
- Even when we do not have to replace the Goods, we may decide to do so anyway. In some cases, we may decide to substitute the Goods with a similar alternative product of our choosing. All such decisions are at our absolute discretion.
- All such replaced or substituted Goods continue to receive the benefit of this Additional Warranty for the time remaining on the original Warranty Period (or three months, whichever is the longest).
- This Additional Warranty does not cover items damaged by normal wear and tear including but not limited to chips, scratches, abrasions, discoloration and other minor defects, where the damage has negligible effect on the operation or performance of the Goods.
- This Additional Warranty is limited to replacement or substitution only. As far as the law permits, we will not be liable for any loss or damage caused to property or persons arising from any cause whatsoever and shall have no liability or any incidental, consequential or special damages.
- This warranty is only valid and enforceable in Australia and New Zealand.
MAKING A CLAIM:
In order to claim under this Warranty you must return the Goods to the Supplier (place of purchase) for replacement. If this is not possible, please contact our customer service department at the address below.
- All returned Goods must be accompanied by satisfactory proof of purchase which clearly indicates the name and address of the Supplier, the date and place of purchase and identifies product. It is best to provide an original, legible and unmodified receipt of sales invoice.
- You must bear any expense for return of the Goods or otherwise associated with making your claim under this Additional Warranty.
- This Additional Warranty does not cover items damaged by normal wear and tear including but not limited to chips, scratches, abrasions, discoloration and other minor defects, where the damage has negligible effect on the operation or performance of the Goods.
Frequently Asked Questions
Which type of battery fits a Salter scale?****
The two premium CR2032 batteries in this set are perfect for Salter kitchen scales. Please make sure that this battery is the right one for your scales. 20 mm in diameter and 3.2 mm thick. These CR2032 batteries are the ideal replacement because of their long shelf life.
On the Salter scales, what does l mean?****
When the scale displays Lo/Low, it implies the batteries need to be changed since there is insufficient power for it to function properly.
Calibrating Salter scales is necessary?****
When ‘CAL’ is shown on the LCD display, these scales need to be calibrated. Start by simultaneously pushing the unit (g/oz) selector button and the on/off button; this should cause a reading of “1500” to appear on the LCD display.
Why do the readings on my bathroom scales differ?****
On an uneven surface, various readings can happen even utilizing high-quality equipment. To prevent digital scale weight fluctuation, always use your device on a solid piece of wood or level, smooth, level surface such as tile.
My Salter scales won’t function—why?****
Verify that the battery is installed properly. Verify that you have chosen the preferred unit of measurement—stones/pounds, kilograms, or pounds. Verify sure the scale is not touching a wall and is situated on a level, flat surface. Every time the scale is moved, repeat the “Initialization” method.
Why won’t my bathroom scales function digitally?****
The majority of the time, low or dead batteries are to blame for your scale’s inability to switch on. Take the batteries out and inspect the terminals for rust if the batteries aren’t the issue.
Does each bathroom scale have a different battery?****
It might be difficult to establish which battery is used in weighing machines because there are over 20 distinct battery sizes available. Even if they don’t seem to fit, replacement batteries might be pricey and not usually returnable. Remove the old battery and look at its size code to see which you need.
How is a CR2032 battery inserted?****
Place the CMOS battery (CR2032) with the positive (+) side facing the compute node’s center. Turn the CMOS battery (CR2032) so that you may place it in the socket’s base. Press the top of the CMOS battery – CR2032 into the socket as you move it into position.
What size battery is used by my digital scale?****
Digital scales typically run on AA or AAA batteries. The 9-volt battery may be used by some digital scales.
Does scale suffer from low battery?****
When taking measurements on digital scales, low battery power and bad battery connections are the main causes of scale malfunction and erroneous readings. It is crucial that the scale’s components receive the necessary amount of electricity for precise measurements.
How can I tell whether the scale in my bathroom is accurate?****
Note the weight of a coin after placing it on the scale. Put one more nickel on the scale, then record the updated weight. One additional nickel can be added to the scale; record the weight. The weight should have increased by 5g each time, if your scale is accurate.
How can I adjust the scale?****
Turn the scale on and wait for it to warm up (usually 30 seconds) the calibration mode sequence should start. Observe the directions shown on the scale’s display. Remove the calibration weight after the calibration procedure is finished, then switch back to the regular weighing modes.
I need to reset my digital scale.****
From the scale’s back, remove all of the batteries. For at least 10 minutes, leave the scale’s batteries out of the equation. Make sure the battery compartment is spotless and that there is no residue or debris on the contact terminals. Make sure the batteries are polarized correctly and reinstall them securely.
How long do bathroom scale batteries last?****
With a typical family of four weighing once per day, the lithium battery should last for around 10 years. Make sure the battery is properly installed. If the issue persists, review and adhere to the warranty details. Scale life is increased by the exceptionally low self-discharge of lithium batteries.
What caused my weight scale to malfunction?****
Issues with the display and functionality of digital scales are frequently caused by batteries. Remove the batteries by carefully opening the battery compartment. Clear the compartment of any dust or other objects that could obstruct the battery connection using a small, clean paintbrush or cotton swab.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>