GOODWE Ezlink3000 Smart Dongle Installation Guide
- June 9, 2024
- GOODWE
Table of Contents
Ezlink3000 Smart Dongle
Quick Installation Guide
Smart Dongle
(Ezlink3000)
V1.1-2022-12-30
01 Applications
Single Inverter
Multiple Inverters
02 Installation
Packing List
Installing the Dongle
03 Power On
Step 1 Power on the inverter.
Step 2 Power on the router.
Step 3 Check communication status of the Ezlink through indicators.
Note: Check the indicators on the Ezlink and the inverter to confirm the
communication
status of the device.
Indicator/Silkscreen
|
Color
|
Status
|
Description
---|---|---|---
|
Blue
|
Blink
|
The Ezlink is working properly.
OFF
|
The inverter is powered off.
|
Green
|
ON
|
The Ezlink is connected to the server.
Blink 2
|
The Ezlink is not connected to the router.
Blink 4
|
The router is not connect to the internet.
RELOAD
|
–
|
–
|
Short press to restart the Ezlink.
Long press for 5 seconds to restore factory settings.
04 Commissioning via SolarGo App
Step 1 Download and install SolarGo app.
The UI may be different due to the app version
upgrade. Scan the QR code for latest SolarGo app user
manual.
Step 2 Connect the app and the device.
Step 3 (Optional) When multiple inverters are parallel
connected,
scan the QR code or click Parallel Inverter System Solution User
Manual for more details.
Step 4 Set communication settings of the device.
• The interface may differ depending on the communication method.
• Make sure that the WiFi RSSI value is higher than -60, -50 or higher is
recommended.
When the RSSI value is less than -60, you should move the router closer to the
device,
remove the obstacle, or add a repeater to improve the signal strength.
No.
|
Name
|
Description
---|---|---
1
|
WiFi Network
|
Select WiFi based on the actual connecting.
2
|
Password
|
WiFi password for the actual connected network.
3
|
DHCP
|
• Enable DHCP when the router is in dynamic IP mode. • Disable DHCP when a switch is used or when the router is in static IP mode.
4
|
IP Address
|
• Do not configure the parameters when DHCP is enabled. • Configure the parameters according to the router or switch information when DHCP is disabled.
5
|
Subnet Mask
6
|
Gateway Address
7
|
DNS Server
05 Device Replacement
Step 1 Prepare a new device before replacing the old Ezlink.
Step 2 Remove the Ezlink using the Unlock Tool.
Step 3 Install the new device.
Step 4 Refer to the Quick Installation Guide to configure the new device.
06 Troubleshooting
No.
|
Problem
|
Solutions
---|---|---
1
|
Cannot find CCM
BLE**
|
1. Make sure that the inverter is powered on and the Ezlink device is connected properly.
2. Make sure that the smart device is within the communication range of the Ezlink device.
3. Restart the inverter or short press to restart the Ezlink.
2
|
Unable to connect to CCM-BLE**
|
1. Make sure that no other smart device is connected to CCM-BLE**.
2. Restart the inverter or short press to restart the Ezlink, then reconnect CCM-BLE**.
3
|
Indicator double
blink
|
1. Make sure that the router is powered on.
2. Make sure that the LAN cable is connected tightly.
Quick Installation Guide V1.1-2022-12-30
4
|
Indicator
quadruple blink
|
1. Make sure that the cables are connected properly, and the router can access the internet.
2. If the problem persists, contact the after sales service.
---|---|---
5
|
Indicator off
|
Check whether the inverter is powered on.
07 Technical Data
Model
|
Ezlink3000
---|---
General
Parameters
|
Connection Interface
|
USB
Ethernet Interface (Optional)
|
10/100Mbps self-adaption,
Communcation distance ≤100m
Bluetooth
|
Bluetooth 5.1
Installation
|
Plug-and-play
Indicator
|
LED Indicator
Dimensions (W × H ×D mm)
|
153 × 49 × 32
Weight (g)
|
130
Ingress Protection Rating
|
IP65
Power Consumption (W)
|
≤2
Operation Mode
|
STA
Wireless
Parameters
|
WiFi Communication
|
802.11 b/g/n(2.412GHz-2.484GHz)
Environment
Parameters
|
Operating Temperature Range (°C)
|
-30 ~ +60
Storage Temperature Range (°C)
|
-30 ~ +70
Relative Humidity (non
condensing)
|
0-100%
Max. Operating Altitude (m)
|
4000
For more information, scan the QR codes below.
SolarGo App SolarGo User Manual
SEMS Portal App
SEMS Portal app User Manual
Parallel Inverter System Solution User Manual
Website
GoodWe Technologies Co., Ltd.
No. 90 Zijin Rd., New District, Suzhou, 215011, China
service@goodwe.com 340-00647-01 Local Contacts
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>