HUANANZHI X79-4MT Motherboard User Manual

User Manual
X79-4MT

SAFETY PRECAUTIONS

• Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a successful computer assembly.
• Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
• In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.
• Hold the border of motherboard when taking it out. Do not touch the sensitive parts of motherboard.
• Please put the motherboard in an anti-static container or on anti-static pad if not needed.
• Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
• Do not start the computer before installation finished, otherwise it might result in permanent damage to the computer parts or even injury to the user.
• If you need any assistance in the process of installation，please contact our after-sales customer service or reach us on HUANANZHI official E-mail:bussiness@huananzhi.com for professional technical support.
• Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
• Keep the motherboard away from moisture.
• Keep the user manual for future reference.
• Before plugging the power supply, please make sure the socket provides the corresponding voltage.
• In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything onto the power cable.
• In the event of any of the following conditions, have the board checked by a service technician:
• Liquid penetrated into the computer.
  Motherboard is exposed to moisture.
  Motherboard does not work even if you follow the instructions on user manual.
  Motherboard fell off to the ground and got damaged.
  Motherboard has clear signs of damage.

PACKING

Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact us as soon as possible.
1.1HUANANZHI X79-4MT PROMotherboard
2.1SATA data cable
3.1I/O shield back plat
4.1 User Manual
5.1*Warranty Card

BRIEF INTRODUCTION

Features
CPU： Intel ® LGA2011 Intel ® Xeon ™ Intel ® LGA2011 I7 3th
Generation Intel ® Core ™
RAM： 4*DIMM supports up to 128GB DDR3 1866/1600/1333MHZ Non-ECCmemory
Two-Channel Memory Architecture
Actual memory data rate depends on CPU type and DRAM module
I/O effects： 4 x SATA2.0
6 x USB2.0 interface
1 x PS/2 Mouse and Keyboard port
1 x RJ45 Network card interfacet
Audio: Realtek Audio Transcoder
Realtek 5.1 Channel High Fidelity Audio
Audio output: Front Out/Front Speaker Out
Audio input: Microphone input，Audio input
Ethernet: 1 x Realtek PCle Gigabit LAN
Expansion slot：1 x PCIe 3.0 x16
2 x PCIe 3.0 x1
1 x M.2 NVME PCIe 3.0X4 2242/2260/2280

MOTHER BOARD IMAGE

Rear I/O Panel

Installation And Settings

NOTICE
please check the motherboard where all pins marked with number “1” or white bold line are position “1”.

• In order to properly place the CPU in the motherboard, the surface of the LGA2011 CPU has two pairs of starting points and a golden triangle. Golden triangle indicates Pin1

2-7 CPU Installation

| 1. Remove the screw from the screw base
2. Remove the screw base
---|---
| 3.Tighten the screw base screwed into the length M.2 module to the M.2 interface distance hole
4. Insert your M.2 module into the M.2 interface at a 30 degree angle
| 5. Place the screw on the trailing edge notch of your M.2 module and tighten to the screw base

2 -8 M.2 Interface Installation

1. Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installation
2. Align the memory module into the slot and press

2-9 Memory Installation

| 1. Use a screwdriver to remove the bezel and screws on the main unit
---|---
| 2. Need to pick up the card slot of the card slot when installing the graphics card
| 4. After the installation is in place, the chuck will automatically return to its position.
5. Secure the graphics card to the chassis with screws
6. Install the power cord

2 -11 SATA Interface

Drivers installation

1. Drivers listing :
   Driver Directory| Driver Description| Operating System
   ---|---|---
   X79-4MT Chipset Driver| Intel chip information installation| win7/win10/win11
   X79-4MT Suond Card Driver| Realtek series sound card driver installation| win7/win10/win11
   X79-4MT PRO LAN Driver| Realtek network card driver installation| win7/win10/win11

2. Intel Chip Information Installation
   Run “Control Panel – System – Hardware – Device Manager” Click the right mouse button to change the driver’s hardware device and proceed with the installation below： Option: Propertyl – Update driverl – Not connect to Internet – Manually installation Find the corresponding directory Select “Next step”

3. Audio driver installation
   Before this installation, please check the model of the audio chip on the motherboard first(you may refer to this manual), Select the proper driver accordingly for installation.
   3.1Audio driver installation (take HD Audio series for example) Run “driver installer”: /X79-4MT Audio/ALC662-32bit_Win7Win8 Win81_Win10_R279/ALC662-64bit_Win7_Win8_Win81Win10 R279.exe Click on “next”to continue,and then”finished” The system will automatically restart itself to finish the installation
   3.2 Uninstallation of audio driver(take HD Audio series for example) Getting into Windows desktop, choose “setting”/ “control”,and then “add/remove programs”. Later, choose “Realtek High Definition Audio Driver” in the menu and click on “add/remove”so thatthe driver will be automatically removed.

4. Driver installation of external video card Run”driver installer” take Setup.exe click on “next”- “yes” -“next” -“next”and”finished” The system will automatically search for devices to complete the installation

5. Driver installation of network
   Run “driver installer”: X79-4MT LAN/Win7_8/setup.exe clickon “next”-“installation”-“finished” and restartthe computer，the system will automatically search for devices to complete the installation.

BIOS Settings

In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down, motherboard’s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press  “Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. Motherboard warm boot key is “F7” Menu: please pay attention to every option in the settings menu.
When there is a triangle shaped symbol on the left side of menu, it means that you choose this sub-menu,so a pop-up sub-menu will be available.”

1.Main Menu Function

Main
Advanced
Chipset
Boot
Security
Save
Exit

Main
System Overview
Date/Time settings, HDD specs/Monitor type settings.
Advanced
Advanced Settings
BIOS special function settings, such as virus alert, booting disk priority etc.
Chipest
Advanced Chipest Settings
Boot
Boot Settings
Security
Security Settings
Save
Save Setting
Exit
Exit Options
Exit settings include loading of optimized defaults value/loading of fail-safe defaults / discarding changes/ exiting without saving.Exit settings include loading of optimized
defaults value/ loading of fail-safe defaults / discarding changes/ exiting without saving.

SZ HUANAN SANXIAN TECHNOLOGY CO.,LTD.
WWW.HUANANZHI.COM

References

• 华南金牌官网

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>