HUANANZHI X58 DELUXE Motherboard User Manual
- June 9, 2024
- HUANANZHI
Table of Contents
- HUANANZHI X58 DELUXE Motherboard
- Product Information
- Product Usage Instructions
- product Packing
- product Drivers Installation
- product BIOS Settings
- SAFETY PRECAUTIONS
- PACKING
- BRIEF INTRODUCTION
- MOTHERBOARD IMAGE
- Rear I/O panel
- Installation And Settings
- Drivers installation
- BIOS Settings
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
HUANANZHI X58 DELUXE Motherboard
The X58 DELUXE motherboard is manufactured by SZ HUANAN SANXIAN TECHNOLOGY CO.,LTD. and can be found on their website at www.huananzhi.com.
Product Information
- Supports ESD protection
- Supports DDR3 RAM up to 32GB with ECC/ECC CPUDRAM
- Supports 6 x SATA ports (3Gb/s)
- Supports 12 x USB ports (8 x USB 2.0, 4 x USB 3.0)
- Supports 1 x PS/2 port, 1 x RJ45 LAN port, and 6 x audio ports
- Features Realtek ALC662 audio codec and Realtek RTL8111E Gigabit LAN controller
- Supports 2 x PCIe 2.0 x16 slots, 1 x PCIe 2.0 x4 slot, and 2 x PCI slots
- Supports ATX power supply
Product Usage Instructions
product Safety Precautions
Products could be damaged due to electrostatic discharge (ESD). To prevent this, follow these steps:
- Make sure all parts are firmly connected.
- Discharge your body static by touching other metal objects before taking the motherboard out of the box.
product Packing
Please confirm that the motherboard is properly packaged upon purchase of the product. If there is any damage to packaging or lack of accessories, contact the manufacturer as soon as possible.
The following accessories are included:
- HUANANZHI X58 DELUXE motherboard
- SATA data cable
- I/O shield back plate
- User manual
- Warranty card
product Drivers Installation
Please refer to the user manual for instructions on how to install the necessary drivers for the motherboard.
product BIOS Settings
Please refer to the user manual for instructions on how to access and configure the BIOS settings.
SAFETY PRECAUTIONS
- Products could probably be damaged due to electrostatic discharge(ESD). Please follow these steps below for a success-ful computer assembly.
- Make sure all parts are firmly connected; otherwise, it might lead to the failure of recognizing components or starting the computer.
- In order to prevent products from being damaged by ESD, please make sure to discharge your body static by touching other metal objects before taking the motherboard out of box.
- Hold the border of the motherboard when taking it out. Do not touch the sensitive parts of the motherboard.
- Please put the motherboard in an anti-static container or on an anti-static pad if not needed.
- Before turning on the computer, make sure all parts inside the case are firmly connected without any loose screws or metal components.
- Do not start the computer before installation finished, otherwise, it might result in permanent damage to the computer parts or even injury to the user.
- If you need any assistance in the process of installation, please contact our after-sales customer service or reach us on HUANANZHI official E-
- mail:business@huananzhi.com for professional technical support. Prior to installation or disassembly, please switch off the power and pull the power cable from the socket.
- Keep the motherboard away from moisture.
- Keep the user manual for future reference.
- Before plugging the power supply, please make sure the socket provides the corresponding voltage.
- In any of the following situations, please keep the motherboard and power cable in a safe place. Do not put anything onto the power cable.
- In the event of any of the following conditions, have the board checked by a service technician:
Liquid penetrated into the computer. The motherboard is exposed to moisture.
The motherboard does not work even if you follow the instructions on the user
manual.
Motherboard fell off to the ground and got damaged. Motherboard has clear signs
of damage.
PACKING
Please confirm that the motherboard is properly packaged upon purchase of the
product. If there is any damage to the packaging or lack of accessories,
contact us as soon as
possible.
- HUANANZHI X58 DELUXE motherboard
- SATA data cable
- I/O shield back plat
- user manual
- warranty card
BRIEF INTRODUCTION
Features
- CPU: Intel ® LGA1366 Processor Intel ® Xeon™ Intel® LGA1366 Processor 17 Series 1th Intel ® Core ™M
- RAM: 3*DIMM supports up to 48GB DDR3 1600/1333MHZ Non-ECC.ECC memory Three-Channel Memory Architecture Actual memory data rate depends on CPU type and DRAM module
- 1/O effects: 6 × SATA2.0 (maximum transfer speed up to 2GB/5) 6 x USB2.0 interface 2 × USB3.0 ports 1 x PS/2 Mouse and Keyboard port 1 x RJ45 Network card interface
- Audio: Realtek Audio Transcoder Realtek 5.1 Channel High Fidelity Audio
- Audio output: Front Out/Front Speaker Out
- Audio input: Microphone input, Audio input
- Ethernet: 1 x Realtek PCle Gigabit LAN
- Expansion slot: 2 x PCle 2.0 x16
- 1 x PCle x1
- 1 x PCIe
MOTHERBOARD IMAGE
X58 DELUXE motherboard illustration
Rear I/O panel
Installation And Settings
notice
please check the motherboard where all pins marked with number“ 1” or white
bold line are position“ 1”.
In order to properly place the CPU in the motherboard, the surface of the LGA1366 CPU has two pairs of starting points and a golden triangle. Golden triangle indicates Pin1
CPU Installation
- Pull the clips on both ends of the memory slot outward, and the memory strip corresponds to the protruding position of the slot to determine the direction of installation.
- Align the memory module into the slot and press
- Let the snaps on both ends of the slot automatically bounce
Memory Installation
Graphics Card Installation
- SATA Interface
Drivers installation
Drivers listing
Intel Chip Information Installation
Run “Control Panel – System – Hardware – Device Manager” Click the right mouse
button to change the driver’s hardware device and proceed with the
installation below:
Option: Property – Update driver – Not connect to the Internet – Manually
installation Find the corresponding directory Select “Next step”
Audio driver installation
Before this installation, please check the model of the audio chip on the
motherboard first(you may refer to this manual), Select the proper driver
accord-ingly for installation.
Audio driver installation (take the HD Audio series for example)
Run “driver installer”: / X58 SOUND CARD DRIVER/VISTA-WIN-R267, take
WDW-267 if OS is XP Click on “next” to continue,and then”finished” The system
will automatically restart itself to finish the installation
Uninstallation of audio driver(take HD Audio series for example)
Getting into the Windows desktop, choose “setting”/ “control”, and then
“add/remove programs”. Later, choose “Realtek High Definition A udio Driver”
in the menu and click on “add/remove”so that the driver will be automatically
removed.
Driver installation of external video card
Run “driver installer”, take Setup.exe, click on “next”- “yes” -“next” “-
next”and“finished” The system will automatically search for devices to
complete the installation
Driver installation of network
Run “driver installer””: X58 LAN DRIVER/WIN7 XP click on “next”-
“installation”- “finished”and restart the computer, and restart the
computer,The system will automatically search for devices to complete the
installation.
BIOS Settings
In order to enable the computer to work well or execute specific functions, CMOS SETUP normally stores all kinds of data in CMOS SRAM of the motherboard. When the computer is shut down, the motherboard’s battery will supply power to CMOS SRAM. When the computer is turned on and starts POST(Power On Self Test), press“ Delete/Del” key to enter into AMI BIOS CMOS SETUP main page. The motherboard warm boot key is“ F7”.Menu: please pay attention to every option in the settings menu. When there is a triangle shaped symbol on the left side of menu, it means that you choose this sub-menu,so a pop-up sub-menu will be available.
Main Menu Function
Main | Advanced | Chipset | Boot | Security | Save | Exit |
---|
- Main
- System Overview Date/Time settings, HDD specs/Monitor type settings.
- Advanced Advanced Settings BIOS special function settings, such as virus alert, booting disk priority etc.
- Chipest Advanced Chipest Settings
- Boot Boot Settings
- Security Security Settings
- Save Save Setting
- Exit Exit Options Exit settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding changes/ exiting without saving.Exit settings include loading of optimized defaults value/ loading of fail-safe defaults / discarding changes/ exiting without saving.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>