ERGOAV ERSSM1-01B Sones Speaker Stand Instruction Manual
- May 21, 2024
- ERGOAV
Table of Contents
Sones® Speaker Stand
Instruction Manual
Model: ERSSM1-01 B
Thank You for Choosing this ErgoAV Product!
At Ergo, we want to add value to your AV experience by providing the highest
quality products and services in the industry. If you have any concerns or
comments, please contact us.
Important Safety Instructions
- Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. If you require replacement parts, contact customer service at support@ergoav.com.
- Not all parts and hardware included will be used.
- Carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service at support@ergoav.com.
- This product may contain moving parts. Use with caution.
- Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
Weight Restrictions
If your Speaker weighs more, this stand is NOT compatible.
WARNING
DO NOT exceed the maximum weight indicated. This speaker stand is intended
for use only within the maximum weights indicated. Use with products heavier
than the maximum weights indicated may result in failure of the stand and its
accessories, causing possible damage and or injury.
Tools Needed (Not Included)
Supplied Parts and Hardware
WARNING:
This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not
use damaged or defective parts. If you need replacement parts, please contact
Technical Support at 877-419-7832 or
Customer Service at support@ergoav.com.
- NOTE: Not all hardware included in this package will be used.
Supplied Parts and Hardware
Step 1 Assemble Spikes to Base
Mounting the Spikes [A] and Covers [B] on the Base [01 ].
NOTE: Covers [BJ can be used as an alternative if Spikes [A] will damage
floors.
‘
Step 2 Assemble Pillar to Base
Step 3 Pillar Assembly
Feed cable(s) through lower Pillar [02] and Connector [06]. Insert Connector
[06] into Pillar [02]. Feed cable(s) through upper Pillar [02]. Insert upper
Pillar [02] over Connector [06] to secure assembly.
Step 4 Secure the Speaker Bracket to the Pillar
Step 5 ( Optional) Adjust Level of Base
To level and stabilize the base, you can remove the Cover [B] (if needed) and
rotate the Spike [A]. Repeat on each corner as necessary.
ERSSM1-01B
Speaker Accessories
The ERSSM1-01B is designed to be comp able with the Osnos® Play: 1® and Play: 5® speakers. The adjustable feet or spikes can level the stand on uneven floors and improve acouscs. Built in cable management allows cables to run through the pillar to create a clean and finished look. Steel pillar and glass base provide a strong and stylish fountain for your speaker. 34″ height places the speaker at optimum listening level.
Features
- Designed to be comp able with the Osnos® Play: 1® and Play: 5® speakers.
- Adjustable feet or spikes level stand on uneven floors and improve acouscs.
- Cable management – cables run through pillar to create a clean look.
- Solid Fountain – steel pillar and glass base provide a strong and stylish fountain for your speaker.
- 34″ Tall to place the speaker at optimum listening level.
Model Number: ERSSM1-01B
WARRANTY: 5-Year
Product Specifications| DIMENSIONS (W x H x D)| PRODUCT WEIGHT|
LOAD CAPACITY| FINISH| AVAILABLE COLORS
---|---|---|---|---|---
12.5″ × 34.2″ × 12.6″| 14.7 lbs.| 22 lbs.| Powder Coating| Black
318.3mm × 869mm| 6.68 KG| 10 KG
Package Specifications| PACKAGE SIZE (W x H x D)| PACKAGE
WEIGHT| PACKAGE UPC CODE| PACKAGE CONTENTS| UNITS IN PACKAGE
20.4″ × 6.4″ × 14.6″| 17.4 lbs.| 810082200249| Product, Manual, Parts| 1 Unit
517mm × 163mm| 7.9 KG
Master Carton
Specifications| PACKAGE SIZE (W x H x D)| PACKAGE WEIGHT| | |
UNITS IN CARTON
20.9″ × 13.4″ × 15.4″| 36.5 lbs.| | | 2 Unit
530mm × 340mm| 16.55 KG
Product Dimensions
ERSSM1-01B Speaker Stand
The information and designs contained in this document are confidential and the
proprietary property of BESTERGO, Inc neither the design nor any information
contained in this drawing may be reproduced, used, or disclosed to others
without the express
written permission of BESTERGO, Inc.
| 3-D View | FRONT VIEW |
|---|---|
| SIDE VIEW | TOP VIEW |
At ErgoAV, we strive to provide the highest value products.
We want to support your purchase.
If you have questions, concerns,
or feedback please let us know!
ErgoAV Customer Care
Phone(877)419-7832
support@ergoav.com
9501 Louisiana Ave N, #200, Brooklyn Park, MN 55445
www.ergoav.com
1-877-419-7832
support@ergoav.com
ergoav.com