ERGOAV ERSSM3-01 B Sonos Speaker Stands Instruction Manual
- October 30, 2023
- ERGOAV
Table of Contents
ERGOAV ERSSM3-01 B Sonos Speaker Stands
Product Information
The ERSSM3-01B is a speaker stand designed to hold speakers weighing up to 15 lbs (6.8 kg). It comes with a base, pillar, decorative cover, Play: 5 tray assembly, Play: 5 sliding lock teeth, Play: 1 tray assembly, spikes, cover, hand screw, bolt M4 x 10mm, and an S2.5 Allen Key for assembly. The product is available in black and has a powder-coating finish.
Product Usage Instructions
- Assemble the spikes to the base by screwing in the hand screws and securing with spikes (A).
- Optionally, add covers (B) to the spikes if they may damage floors.
- Snap the decorative cover (03) into the base (01).
- Install the pillar (02) to the base (01).
- Secure the speaker bracket (06) to the pillar (02) using bolt M4 x 10mm (E) and S2.5 Allen Key (F).
- Tighten all screws and bolts using the S2.5 Allen Key (F).
- Optionally, adjust the level of the base by removing covers (B) and rotating spikes (A) as necessary.
Note that the ERSSM3-01B is not compatible with speakers weighing more than 15 lbs (6.8 kg). Exceeding this weight limit may result in damage or injury. For any concerns or comments, contact ErgoAV Customer Care at phone (877)419-7832, emailsupport@ergoav.com, or website www.ergoav.com.
Thank You for Choosing this ErgoAV Product! At ErgoAV, we want to add value to your AV experience by providing the highest quality products and services in the industry. If you have any concerns or comments, please contact us.
Important Safety Instructions
- Check package contents against Supplied Parts and Hardware List to assure that all components were received undamaged. Do not use damaged or defective parts. Ifyou require replacement parts, contact customer service at support@ergoav.com.
- Not all parts and hardware included will be used.
- Carefully read all instructions before attempting installation. If you do not understand the instructions or have any concerns or questions, please contact customer service at support@ergoav.com.
- This product may contain moving parts. Use with caution.
- Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use
Weight Restrictions
If your Speaker weighs more, this stand is NOT compatible
WARNING
DO NOT exceed the maximum weight indicated. This speaker stand is intended for
use only within the maximum weights indicated. Use with products heavier than
the maximum weights indicated may result in failure of the stand and its
accessories, causing possible damage and or injury.
Supplied Parts and Hardware
WARNING
This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. Do not
use damaged or defective parts. If you need replacement parts, please contact
Technical Support at (877) 419-7832 or Customer Service at
support@ergoav.com.
NOTE : Not all hardware included in this package will be used.
- Step 1 Assemble Spikes to Base
- Secure with Spikes [A] after the Hand Screw [C] are screwed into the Base [01] .
- Step 2 ( Optional) Add Covers to Spikes
- NOTE : Covers [B] can be used as an alternative if Spikes [A] will damage floors
- Step 3 Install Cover onto the Base
- Snap the Decorative Cover [03] into the Base [01 ].
- Step 4 Install Pillar to Base
- Step 5 Secure the Speaker Bracket to the Pillar
- Step 6 ( Optional) Adjust Level of Base
To level and stabilize the base, you can remove the Cover [B] (if needed) and rotate the Spike [A]. Repeat on each corner as necessary.
At ErgoAV, we strive to provide the highest value products.
We want to support your purchase. If you have questions, concerns, or feedback
please let us know! ErgoAV Customer Care
Phone (877)419-7832
support@ergoav.com
9501 Louisiana Ave N, #200, Brooklyn Park, MN 55445
www.ergoav.com
The ERSSM3-01B is designed to be compa?ble with the Sonos® Play: 1® and Play: 5® speakers. Adjustable pillar raises or lowers the speaker stand to your ear level to op?mize the listening experience. The adjustable feet or spikes level stand on uneven floors and improve acous?cs. Built in cable management allows cables to run through pillar and underneath base to create a clean look. Steel pillar and base provide a strong and stylish founda?on for your speaker
Features
- Designed to be compatible with the Sonos® Play: 1® and Play: 5® speakers.
- Height adjustable – raise or lower the speaker stand to your ear level to optimize the listening experience.
- Adjustable feet or spikes level stand on uneven floors and improve acoustics.
- Cable management – cables run through pillar and underneath base to create a clean look.
- Solid Foundation – steel pillar and base provide a strong and stylish foundation for your speaker.
SPECIFICATION
| DIMENSIONS (W x H x D)| PRODUCT WEIGHT| LOAD CAPACITY|
FINISH| AVAILABLE COLORS
---|---|---|---|---|---
Product
Specifications
| 13.2″ × 43″ × 13.2″
336mm × 1093mm × 336mm
| 20 lbs.
9.09 KG
| 15 lbs.
6.8 KG
|
Powder Coa�ng
|
Black
| PACKAGE SIZE (W x H x D)| PACKAGE WEIGHT| PACKAGE UPC
CODE| PACKAGE CONTENTS| UNITS IN PACKAGE
---|---|---|---|---|---
Package
Specifications
| 27″ × 6″ × 16.5″
690mm × 157mm × 420mm
| 23.2 lbs.
10.55 KG
|
810082200393
|
Product, Manual, Parts
|
1 Unit
| PACKAGE SIZE (W x H x D)| PACKAGE WEIGHT| | | UNITS IN
CARTON
---|---|---|---|---|---
Master Carton
Specifications
| 27.5″ × 13″ × 16.8″
700mm × 335mm × 427mm
| 48.5 lbs.
22.03 KG
| | |
2 Unit
Product Dimensions
The information and designs contained in this document are confidential and the proprietary property of BESTERGO, Inc neither the design nor any information contained in this drawing may be reproduced, used, or disclosed to others without the express writien permission of BESTERGO, Inc
3-D View
FRONT VIEW
SIDE VIEW
TOP VIEW
ErgoAV Customer Care
phone (877)419-7832
email : support@ergoav.com
website : www.ergoav.com
address : 9501 Louisiana Ave N, #200, Brooklyn Park, MN 55445