HOME ACCENTS Holiday 22RT141221 6ft Lcicle Shimmer TWINKLING LED Candy Canes with Red Bow Instruction Manual
- May 21, 2024
- HOME ACCENTS Holiday
Table of Contents
SKU # 1007 610 868
Model # 22RT1412211
ASSEMBLY INSTRUCTIONS
6ft Icicle Shimmer TWINKLING LED
Candy Canes with Red Bow
22RT141221 6ft Lcicle Shimmer TWINKLING LED Candy Canes with Red Bow
Thank you!
We appreciate the trust and confidence you have placed in Home Accents through
the purchase of this 6ft Icicle Shimmer TWINKLING LED Candy Canes with Red
Bow. We strive to continually create quality products designed to enhance your
home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Accents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
Parts List
Locater | Name | Qty. |
---|---|---|
A | Top section of the Left Candy Cane | 1 |
B | Middle section of the Left Candy Cane | 1 |
C | Bottom section of the Left Candy Cane | 1 |
D | Top section of the Right Candy Cane | 1 |
E | Middle section of the Right Candy Cane | 1 |
F | Bottom section of the Right Candy Cane | 1 |
G | Half of Bow | 2 |
H | Support Bar | 2 |
I | Base Stand | 1 |
Hardware List
Locater | Name | Qty. |
---|---|---|
J | Cotter Pin | 4 |
K | Plastic Tie | 20 |
L | Spare Bulb | 10 |
M | Spare Fuse | 6 |
N | Ground Stake | 8 |
0 | Anchoring String | 4 |
P | Bolt & Wingnut | 5 |
USE AND CARE GUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take
special care not to pull, cut or damage the lighting string. Read the entire
manual prior to assembly and identify all the parts included in the package
against the parts list. It is recommended to assemble parts of the product
while laying flat on the ground versus standing the item up to assemble the
parts. If any parts are missing or damaged do not attempt assembly but contact
our customer service center or return to place of purchase with purchase
receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543 )
Pre-Operation
CAUTION: Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION: The lighting string on this product is rated at 36 Watts (0.3
Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product
inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket
enclosures, loose connections, exposed copper wire or other obvious damage.
Care and Cleaning
a. Carefully remove the product from wherever it is placed. This helps to
avoid any undue strain or stress on the product connections, and wires. If the
product is placed somewhere other than the ground it should be well secured,
flat and stable.
b. Carefully disassemble the unit taking caution not to cut any
electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before
storing.
d. Store the product neatly in a cool, dry location protected from
sunlight.
Troubleshooting
a. Ensure that the ground or surface that the item sits on is flat and
level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed
Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and
connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all
cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days maximum per
year.
This product is covered by a 90 days limited guarantee due to defects in
material and workmanship. Return the product with purchase receipts to the
location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products
not used in accordance with directions provided on or with the product, burn
out of bulbs or LEDS, batteries, products that have been subjected to
unauthorized repair and/or modification and damage caused by shipping and
improper handling, alterations, misuse, in store display models or accidents.
Questions, problems, missing parts? Before returning to the store, call Home
Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
ASSEMBLY
-
Assembling the Left Candy Cane
Insert the connecting rods at the bottom of the Top Section (A) into the connecting holes at the top of the Middle Section (B). Insert the connecting rods at the bottom of the Middle Section (B) into the connecting holes at the top of Lower Section (C) then fasten at the connecting loops with Plastic Ties (K). -
Assembling the Middle Section of the Right Candy Cane to the Left Candy Cane
Insert the connecting rods of the Right Candy Cane’s Middle Section (E) into the matching connecting holes on the Left Candy Cane’s Middle Section (B) then fasten at the connecting loops with Plastic Ties (K) and secure them with Bolt & Wingnuts (P) at the connecting loops. -
Assembling the Right Candy Cane
Insert the connecting rods at the bottom of Top Section (D) into the connecting holes at the top of Middle Section (E). Insert the connecting rods at the top of Bottom Section (F) into the connecting holes at the bottom of the Middle Section (E) then fasten at the connecting loops with Plastic Ties (K). -
Assembling the Support Bar
Stack the Upper Support Bar (H) onto the Lower Support Bar and secure with the built in locking pin. -
Assembling the Base Stand and Support Bar
Insert the connecting rods on the Base Stand (I) into the connecting holes on the Bottom Sections of the Candy Canes (C,F) then fasten them with Bolt & Wingnuts (P). Insert each hooked end of the Support Bar (H) into the matching holes on the back of the left Candy Cane Middle Section (B) and the Base Stand (I) then secure with the Cotter Pins (J). -
Assembling the Bow
Insert the connecting rods on one half of Bow (G) into the connecting holes on the other half of Bow (G) then fasten at the connecting loops with the Plastic Ties (K). -
Assembling the Bow to Candy Cane
Insert the connecting rods on Bow (G) into the matching connecting holes on the front of Right Candy Cane Middle Section (E). Connect the electrical from Bow to the electrical plug on the Bottom Section (F). -
Assembling the Anchoring Strings and Ground Stakes
Insert 4 Ground Stakes (N) over the metal Base Stand at the four corners then into the ground firmly. Hook the plastic clipped end of each of Anchoring Strings (O) onto the matching loops on the Top Sections of the Candy Canes (A,D).
Hook the free end of the Anchoring Strings (O) to the hook on the remaining 4 Ground Stakes (N) then firmly pull each Anchoring String with Ground Stake out and away from the Candy Canes evenly and secure to the ground.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>