PATLITE NE-SN-USB USB Controlled Multicolor Signal Beacon Instruction Manual

: June 12, 2024
: PATLITE

Table of Contents

PATLITE NE-SN-USB USB Controlled Multicolor Signal Beacon
Product Information
Product Usage Instructions
Specifications
FCC
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PATLITE NE-SN-USB USB Controlled Multicolor Signal Beacon

Product Information

Model: NE-SN-USB
Operating Temperature Range: -20°C to +50°C
Operating Voltage: 5V DC (USB Bus Power)
Current Consumption: 205mA
Luminous Color: White
Buzzer: Buzzer Sound Continuous Buzzer, Volume Level Max

Product Usage Instructions

To use the NE-SN-USB, follow these instructions:

Make sure the operating temperature is within the range of -20°C to +50°C.
Connect the NE-SN-USB to a USB port with a 5V DC power supply.
The current consumption should be around 205mA.
The NE-SN-USB emits a white light and has a continuous buzzer sound with maximum volume.
If you experience any interference or reception issues, try the following:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
If you have any questions or need assistance, please contact PATLITE (U.S.A) Corporation in the USA or PATLITE Europe GmbH in Germany using the provided contact information.

Note: Dimensions, specifications, structures, and other information in this document are subject to change for improvement without notice. PATLITE is a trademark or registered trademark of PATLITE Corporation in Japan and other countries.

Specifications

Model	NE-SN-USB	NE-WN-USB
Operating temperature range	-20℃ to +50℃	-25℃ to +60℃
Operating voltage	5V DC(USB Bus Power)
Current consumption	Max.	205mA
Operating conditions

Luminous Color: White
Buzzer: Buzzer Sound

Conformity Standards

EMC Directive (EN 55032,EN 55035)
RoHS Directive (EN IEC 63000)
UL62368-1, CSA C22.2 No.62368-1-14
FCC Part 15 Subpart B Class B, ICES-003 Class B
KC (KS C 9832,KS C 9835)
EAC (TR CU 020, TR EAEU 037)

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

< Note>

Dimensions, specifications, structures and other information in this document are subject to change for improvement without notice.
PATLITE is a trademark or registered trademark of PATLITE Corporation in Japan and other countries.

[Contact us in the USA]