Midea WMT-DA Wall Mounted DC Inverter Air Conditioner Instructions

Midea WMT-DA Wall Mounted DC Inverter Air Conditioner

Specification of Wireless Module

• Model: US-SK105
• Antenna Type : Printed PCB Antenna
• Frequency: WLAN 2400-2483.5 MHz
• Maximum Transmitted Power : <20 dBm Max
• Dimensions : 41 x 24 x 5 (mm)
• Operation Temperature: 0°C – 45°C / 32° F – 113° F
• Operation Humidity: 10% – 85%
• Power Input : DC 5V /300 mA

Precautions

App Compatibility:

• The app is available for both iOS and Android, however, older versions may no longer be compatible. Please keep the app updated with the latest version. Midea makes no guarantee of compatibility and is not responsible for issues arising as a consequence thereof.

Wireless Security:

• The Smart Kit supports the following security protocols: WPA-PSK / WPA2-PSK / WPA3-SAE.
• It may be used with or without encryption although encryption is strongly recommended.

Connectivity

• Network issues may occasionally cause timeouts. The unit display and the app may become unsynchronized but this will resolve itself when the network is restored.
• Should the network remain unavailable, it might be necessary to run the configuration process again.
• Change in the wireless network will require reconfiguration of the device.

Configuration

• The actual network configuration process may vary slightly from the manual.
• Please check the service website for more information.

NOTE
Midea will not be responsible for any problems that could be caused by incompatibility or network issues, your wireless router, and your mobile phone.

Using the SmartHome App

CAUTION

Ensure that your mobile phone is connected to the wireless network. Bluetooth must be turned on. The device must also be powered up.

Step 1: Download the SmartHome app
Scan the QR code below to download the SmartHome app from the app store or search for it directly on the Google Play Store or Apple’s App Store.

Step 2: Log in
Open the SmartHome app. Log in directly if you have an existing SmartHome account or create a new account. Alternatively, you can also use a 3rd party login platform.

Step 3: Connecting the device

1. When you log in, you may see the message “Smart devices discovered nearby”. Tap to add your device.
2. If no such message appears, proceed as follows: Tap on “+” and select your device in the list of nearby available devices. If your device is not listed, please add your device manually, first selecting the device category e.g. Dehumidifier.
3. Follow the steps in the app to connect your device to the wireless network. If your device fails to connect, follow the additional instructions in the app.

Step 4: Controlling the device
After pairing successfully, a card will be created for the device in the SmartHome app. Shortcuts for basic functions will appear on the card such as changing the humidity or switching the device on or off. Tapping on the card will reveal additional features and settings. The actual design may look different from the examples due to app updates.

Compliance

We, hereby declare that this dehumidifier complies with the relevant provisions of RE Directive 2014/53/EU. A copy of the full Doc is attached (Europen Union products only).
Wireless module models: US-SK105:

• FCC ID: 2ADQOMDNA21
• IC: 12575A-MDNA21

This device complies with Part 15 of the FCC Rules and it contains licence- exempt transmitter(s) / receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference;
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Only operate the device by the instructions supplied. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.

FCC STATEMENT

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>