Midea NT20-22E Compact Fan Heater User Manual

Midea NT20-22E Compact Fan Heater

Product Information

Compact Fan Heater

The Compact Fan Heater (NT20-22E) is a portable electric heater designed for occasional use in well-insulated spaces. The product features a compact design and is easy to operate. The appliance is subject to change without prior notice for product improvement, and the appearance of the actual product should be considered the standard.

Safety Instructions

Before operating the appliance, please read the user manual carefully and keep it for future reference. The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance:

• Check the packaging and appliance on arrival to ensure everything is intact and safe to operate. If you find any damage, contact the retailer or dealer.
• Do not modify or alter the appliance for safety concerns, as unintended use may cause hazards and loss of warranty claims.
• Observe warning notices and symbols on the appliance, including danger, warning of electrical voltage, warning, caution, attention, and observe instructions.
• Avoid overheating by not covering the heater.
• Do not use the appliance near water, such as a bath, shower, or swimming pool.
• Supervise children and individuals with reduced physical, sensory, or mental capabilities while using the appliance.
• Keep flammable materials such as curtains at least one meter away from the air outlet.
• Do not use the appliance in rooms occupied by individuals who cannot leave on their own without constant supervision.

Specifications

The Compact Fan Heater (NT20-22E) has the following specifications:

• Intended Use: Occasional use in well-insulated spaces
• Product Type: Portable electric heater
• Model Number: NT20-22E
• Design and Specifications: Subject to change without prior notice for product improvement

Product Overview
The Compact Fan Heater (NT20-22E) is a portable electric heater that is easy to operate. The product has a compact design and is suitable for occasional use in well-insulated spaces.

Operation Instructions
To operate the Compact Fan Heater (NT20-22E), follow these steps:

1. Place the appliance on a flat, stable surface away from any flammable materials.
2. Plug the heater into an electrical outlet.
3. Turn the power switch to the desired setting (low or high).
4. The heater will begin to emit warm air. Adjust the temperature by using the thermostat control.
5. To turn off the appliance, turn the power switch to the off position and unplug the heater from the electrical outlet.

Cleaning and Maintenance

To ensure the safe and optimal operation of the Compact Fan Heater (NT20-22E), follow these cleaning and maintenance guidelines:

• Turn off and unplug the appliance before cleaning.
• Use a soft, dry cloth to wipe the surface of the appliance.
• Do not use water or other liquid cleaners on the appliance.
• Store the appliance in a dry, safe place when not in use.

Troubleshooting
If you experience any issues with the Compact Fan Heater (NT20-22E), consult the troubleshooting section of the user manual or contact your dealer or manufacturer for assistance.

Disposal and Recycling
When disposing of the Compact Fan Heater (NT20-22E), follow local regulations for proper disposal and recycling of electronic waste.

Data Protection Notice

Your personal data may be collected and used in accordance with applicable data protection laws. For more information, refer to the data protection notice included in the user manual.

Warning notices: Before using this product, please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.
This product is only suitable for well insulated spaces or occasional use.

THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.

SAFETY INSTRUCTIONS

Intended Use
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. Please check the packaging and appliance on arrival to make sure everything is intact to ensure safe operation. If you find any damage, please contact the retailer or dealer. Please note modifications or alterations to the appliance are not allowed for your safety concern. Unintended use may cause hazards and loss of warranty claims.

Explanation of Symbols

Danger
This symbol indicates that there are dangers to the life and health of persons due to extremely flammable gas.

Warning of electrical voltage
This symbol indicates that there is a danger to life and health of persons due to voltage.

Warning
The signal word indicates a hazard with a medium level of risk which, if not avoided, may result in death or serious injury.

Caution
The signal word indicates a hazard with a low degree of risk which, if not avoided, may result in minor or moderate injury.

Attention
The signal word indicates important information (e.g. damage to property), but not danger.

Observe instructions
This symbol indicates that a service technician should only operate and maintain this appliance in accordance with the operating instructions.

Read these operating instructions carefully and attentively before using/commissioning the unit and keep them in the immediate vicinity of the installation site or unit for later use!

Caution

• Read Rules for Safe Operation and Instructions carefully.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• The heater must not be located immediately below a socket outlet.

• Children of less than 3 years should be kept away unless continuously supervised.
  Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

• CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

• Do not use this heater if it has been dropped;

• Use this heater on a horizontal and stable surface, or fix it to the wall, as applicable.

Warning

•  Warning: In order to avoid overheating, do not cover the heater.
• If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
• Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
• The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Children being supervised not to play with the appliance.
• WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.
• Do not use if there are visible signs of damage to the reater.
• Do not use outdoors.
• WARNING: Do not use this heater in smallrooms when they are occupied by persons not capable of leaving the room ontheir own, unless constant supervision is provided.

SPECIFICATIONS

Heat output for NT20-22E

| Type of heat input, for electric local space heaters only (select one)
Nominal heat output|

Pnom

|

2

|

kW

| Manual heat charge control with integrated thermostat|

No

Minimum heat output (indicative)

|

Pmin

|

1

|

kW

| Manual heat charge control with room and/or outdoor temperature feedback|

No

Maximum continuous heat output|

Pmax

|

2

|

kW

| Electronic heat charge control with room and/or outdoor temperature feedback|

No

Auxiliary electricity consumption| Fan assisted heat output| No
At nominal heat output|

elmax

|

0

|

kW

| Type of heat output/room temperature control (select one)
At minimum heat output|

elmin

|

0

|

kW

| Single stage heat output and no room temperature control|

No

Maximum continuous heat output|

elSB

|

0

|

W

|

Two or more manual stages, no room temperature control

|

No

 |  | With mechanic thermostat room temperature control| Yes
 |  | With electronic room temperature control| No
 |  | Electronic room temperature control plus day timer|

No

 |  | Electronic room temperature control plus week timer|

No

No

 |  | Room temperature control, with open window detection| No
 |  | With distance control option| No
 |  | With adaptive start control| No
 |  | With working time limitation| No
 |  | With black bulb sensor| No

PRODUCT OVERVIEW

NOTE
All the pictures in this manual are for explanation purpose only. Any discrepancy between the real object and the illustration in the drawing shall be subject to the real subject.

OPERATION INSTRUCTIONS

Check Before Turning On The Machine

1. Check if the power wire is under good condition.
2.  The product adopts 220-240V AC power supply, before use, please confirm if the rated current of the power socket meets the local requirements with safe grounding device, otherwise, please replace it with the qualified socket.

Put The Machine On The Flat Place
Uneven place may possibly cause the turnover switch at abnormal position, then the heater can’t work after turning on, therefore, please put the heater on the flat place, at least the surface below the base of the heater must be flat.

Temperature Control Knob
Insert the plug into the power socket, then turn the Temperature Control knob clock-wise, when hearing the “poop” sound (it means the temperature controller is on), adjust the Temperature Control knob to the desired temperature level.

Power Selection Knob
Turn the Power selection knob to select between 4 functions: Fan only, Low 900W (LOW), MIDDLE 1300W(MIDDLE), High 2000W(HIGH).

Turn Off The Heater

• A. Turn the Power selection knob to OFF position.
  B. Turn the Temperature Control knob anticlockwise to the initial position.
  C. Remove the power plug, store the heater after the entire machine has become cool.

Safety Protection

1. Overheat protection: When the temperature in the heater is too high due to abnormality in the use environment or improper use, the thermostat device can automatically cut off the power and the heater stops working. After the whole heater is cooling, the heater can return to the normal use after removing the abnormality.
2. Inversion protection: When the whole heater is inverted, the safety system will automatically cut off the power, and return to the work state before inversion after the body is placed upright.

Safety Control

• Your heater is fitted with a safety device “Double Protector” that (1) switches off the heater by thermal cut-off in the event of overheating or malfunction, It will reset while the temperature reduce to a normal level. (2) Shuts off the heater by thermal fuse in the event of overheating or malfunction and not operates by some other accidental reason.
• If overheating or malfunctions continue, return the heater to an Approved Service Agent for examination.
• The most common cause of overheating is deposits of dust or fluff entering the heater, Ensure these deposits are removed regularly by unplugging the unit and vacuum cleaning air vents and front grille.
• This heater cannot achieve accurate temperature control of the enviroment, and thus cannot be used as insulation device for storage environment, items, animals and plants.

CLEANING AND MAINTENANCE

1. Light accumulated dust may be removed from the heater with a soft cloth. Wipe the exterior surfaces of the heater occasionally with a cloth moistened (not dripping wet) with a solution of mild detergent and water. Dry the case thoroughly with a soft dry cloth before operating the heater.
2. The fan motor is lubricated by the factory, and will require no further lubrication.
3. No other user maintenance is required orrecommended. If service is required, send your heater to the nearest authorized servicedepot.
4. Store heater in a clean and dry place whennot in use.
   REMEMBER – portable electric heaters are designed for spot heating, or as a supplementary heat source. They are not intended to be main sources of heat during the normal heating season.

NOTE
There may be trace of smoke or odour when unit is first operated. Do not be on the heating coil during the manufacturing process. It will quickly evaporate, and should not re-occur.

TROUBLESHOOTING

If the product does not operate or does not operate properly, first check according to the following list. lf the reason the product does not operate or does not operate properly is not included in the following list, the product mayhave failed. At this time, it is recommended to send the product to the dealer or the Media Service Center for treatment.

After the power is engaged, the machine does not work.

|

● The plug may not be plugged well.

| Check whether the plug is properly inserted into the receptacle.

● The temperature control knob is not turned in place.

| Check whether the temperature control knob is turned to the ON position.
The machine suddenly stops during heating.| ● The temperature exceeds the threshold of the thermal

cut-off.

|

Cool the machine before use.

TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT
logo, word marks, trade name, trade dress and all versions there of are valuable assets of Midea Group and/or its affiliates (“Midea”), to which Midea owns trademarks, copyrights and other intellectual property rights, and all goodwill derived from using any part of an Midea trademark. Use of Midea trademark for commercial purposes without the prior written consent of Midea may constitute trademark infringement or unfair competition in violation of relevant laws.
This manual is created by Midea and Midea reserves all copyrights thereof. No entity or individual may use, duplicate, modify, distribute in whole or in part this manual, or bundle or sell with other products without the prior written consent of Midea.
All the described functions and instructions were up to date at the time of printing this manual. However, the actual product may vary due to improved functions and designs.

DISPOSAL AND RECYCLING

Important Instructions for Environment

Compliance with the WEEE Directive and Disposing of the Waster Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waster electrical and electronic equipment (WEEE).
This symbol indicates that this product shall not be disposed with other household wastes at the end of its service life. Used device must be returned to official collection point for   recycling of electrical electronic devices. To find these collection systems please contact to your local authorities or retailer where the product was purchased. Each household performs important role in recovering and recycling of old appliance. Appropriate disposal of used appliance helps prevent potential negative consequences for the environment and human health.

Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package Information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environ-ment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

DATA PROTECTION NOTICE
For the provision of the services agreed with the customer,we agree to comply without restriction with all stipulations of applicable data protection law, in line with agreed countries within which services to the customer will be delivered, as well as, where applicable, the EU General Data Protection Regulation (GDPR).
Generally, our data processing is to fulfil our obligation under contract with you and for product safety reasons, to safeguard your rights in connection with warranty and product registration questions. In some cases, but only if appropriate data protection is ensured, personal data might be transferred to recipients located outside of the European Economic Area.
Further information are provided on request. You can contact our Data Protection Officer via [email protected]. To exercise your rights such as right to object your personal date being processed for direct marketing purposes, please contact us via [email protected]. To find further information, please follow the QR Code.

www.midea.com
© Midea 2023 all rights reserved

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>