sbs MHHEADFLICKBT SKIDUP Wireless Stereo Headphone User Manual
- June 12, 2024
- sbs
Table of Contents
sbs MHHEADFLICKBT SKIDUP Wireless Stereo Headphone User Manual
Parts Descriptions
POWER ON AND PAIRING
- Press the button A for 7 seconds till the LED starts blink red and blue.
- Open your smartphone bluetooth setting and chose “MH SKIDUP”
POWER OFF
Press and hold the button A for 7 seconds till the LED turns of
PLAY / PAUSE MUSIC
Press one time the button A to start the music (after the headphone is
connected to the smartphone)
Press one time the button A to pause the music while you are listening to
music
ANSWER /END BUTTON
Press one time the button A to answer a phone call.
Press one time the button A to end a phone call.
INCREASE / DECREASE THE VOLUME
Press and keep pressed the button + do increase the volume.
Press and keep pressed the button – to decrease the volume.
NEXT / PREVOIUS SONG
Short press the button + to go to the next song.
Short press the button – to go to the previous song.
CHARGE THE HEADPHONE
Insert the Type-C connector into the headphone’s Type-C port and the USB connector into a PC USB port or a travel charger. The LED will turn on RED light, when the charge is completed the LED will turn OFF.
SPECIFICATION
-
Wireless: 5.3
Working range: 10m -
Battery capacity: 200 mAh
-
Power Input: 5 V D.C. 1A Max
-
Frequency response: 20Hz-20kHz
Sensitivity: 102 dB -
Impedance: 32Ω Type-C Port
-
Playing time: 20 hours
-
Charging time: 2 hours
-
Standby time: 120 hours
-
ƒ: 2402 ÷ 2480 MHz
-
PRF: 6 mW Max
For other informations please contact us at
[email protected]