GLEMM BS 525W Audio Speaker PS System Instruction Manual
- June 13, 2024
- GLEMM
Table of Contents
Instruction manual
Model name:
BS 525W – BS 525B
BS 525W Audio Speaker PS System
Audio_speaker suitable both for BQ and for 100V operation and intended for PA
SYSTEM. Thanks to the high quality of the components used for its construction
it offers an excellent audio performance.
The installation of this product must be carried out exclusively by
specialized technicians, skilled in electric and audio systems, In case of
wrong installation o connections, the manufacturer doesnit take any
responsibilty for damages to people or objects.
Refer to the below pictures (fig.1-2) for correct cable connection. Before
starting the installation, make sure that the amplifer is off. The voltage
present on the connection terminels during operation could be dangerous.
Keep the instruction manual for future reference. Use the included bracket for correct wall or ceiling mounting. The particular bracket hides the cables and offers an exclusive fixing system.
8Ω WIRING
If you wish to cannect the speaker to a low impedance system, put the red +
and the black – wire into the amplifier’s output socket.
If you need to connect more than one speaker, after checking the total power,
you can make series or parallel connections (pict. ) in order to obtain a
final impedance supported by the amplifier (usually 4-16Ω)
Wrong impedances could seriously damage the connected fixtures.
100 WIRING
For the connection of the speaker to a constant voltage system, connect the
speaker’s black terminal to the “COM” socket of the amplifier, while the
speaker’s red terminal is to be connected to the 100V socket of the amplifier.
Use the selector on the back of the speaker to choose the desired power.
If you need to connect more than one speaker, after checking the total power,
you can connect.them to the amplifier with @ “parallel” connection [picture
2). Remember to consider the correct section of the cables, according to the
distance of the speakers from the amplifier.
For the connection of the speaker to a constant voltage system, connect the
speaker’s black terminal to the “COM” socket of the amplifier, while the
speaker’s red terminal is to be connected to the 100V socket of the amplifier.
Use the selector on the back of the speaker to choose the desired power.
If you need to connect more than one speaker, after checking the total power,
you can connect.them to the amplifier with @ “parallel” connection [picture
2). Remember to consider the correct section of the cables, according to the
distance of the speakers from the amplifier.
Consider carefully the power of the speakers and of the amplifier where they are connected: the total power of the speakers must not exceed the amplifier’s power.
COMPLIANCE, WARRANTY AND SERVICE
The CE brand indicates that the product complies with the essential
requirements of the applicable European directives and related standards. The
product is covered by warranty according to current national and European
regulations.
For complete warranty conditions and for technical service requests visit the
website: www.glemm.eu
We also suggest to register your product, by logging into the website’s
private area.
In this way you will have the possibility to receive updates and information
on our items.
The manufacturer, in order to improve its products, reserves the right to
modify the characteristics whether technical or aesthetic, at any time and
without notice.
TECHNICAL SPECIFICATIONS
Max power/ RMS power| 60W / 30W RMS (100V)
30W / 15W RMS (100V)
Speaker| Woofer 5,25″ / Tweeter 0,5″
voltage| 8Ω
70 – 100V (7W, 15W, 30W)
Frequency response| 75 Hz – 20 Khz (102dB)
Included| Bracket
Dimensions| 175 x 250 x 156 mm (I x h x p)
Weight| 1,6 Kg
PRODOTIO DA/ PRODUCED &Y.
KARMA ITALIANA Sel
Via Gozzano 8/bis
21052 Busto Arsizio (VA)
‘www.Karmataliana.it
www.glemm.eu
Made in PR.C.
Documents / Resources
|
GLEMM BS 525W Audio Speaker PS
System
[pdf] Instruction Manual
BS 525W, BS 525B, BS 525W Audio Speaker PS System, Audio Speaker PS System,
Speaker PS System, PS System
---|---