CC01 Solo Stop Light E Bike Instruction Manual
- June 1, 2024
- Solo
Table of Contents
CC01 Solo Stop Light E Bike
Specifications
| Feature | Specification |
|---|---|
| Voltage Compatibility | 6-48V DC |
| Screw Size | 4.2 x 9mm |
| Model Number | CC01 |
Component Identification
- Brake Lever: Illustrated with a dotted line connecting to a diagram of the brake lever internals, indicating the component’s location and internal connections.
- Electrical Connection: Marked with a ‘plus’ and ‘minus’ to show the correct polarity for electrical hookups.
Installation Overview
The diagram displays a step-by-step guide for installing the SOLO STOP-LIGHT on an E-BIKE. Key steps are marked with numbers:
- Connection of the brake lever to the stop-light system.
- Attachment of the stop-light to the bike’s rear.
Note:
A ‘STOP’ sign is used to indicate the location where the stop-light should be
installed on the rear of the bicycle.
FAQ
What voltage is the SOLO STOP-LIGHT compatible with?
The SOLO STOP-LIGHT is compatible with 6-48V DC power sources.
What is the size of the screws required for installation?
The screws required are 4.2 x 9mm in size.
Where should the stop-light be installed on the E-BIKE?
The stop-light should be installed on the rear of the E-BIKE, as indicated by the 'STOP' sign in the installation diagram.
Is the wiring polarity important when installing the SOLO STOP-LIGHT?
Yes, correct polarity must be observed. The wiring is marked with 'plus' and 'minus' to ensure proper connection.