Care MANI0019 Nail Dust Extractor Instruction Manual
- June 1, 2024
- Care
Table of Contents
Care MANI0019 Nail Dust Extractor
Product Overview
Package
- 1 x Nail Dust Collector
- 1x Use Manual
- 2 x Dust Bags
Specification
- Voltage: 110V-240V
- RPM: 4500rpm
- Material: Plastic
Maintenance method of nail dust collector and dust bag
- Clean the surface with a soft brush, or blow it clean with the coo lair mode of a hairdryer.
- If the absorption force drops or vibration occurs due to the usage rate, please replace it with a dust bag.
- Regarding the cleaning of the dust bag, please turn the dust bag over, expose the dust-adhering part, and rub it in clean water.
Notice
Be careful not to let water enter the nail dust collector. Please don’t use detergent on the nail dust collector. Please don’t cut off the power cord during use. Before turning on the machine, be sure to confirm that the dust bag has been installed.
Instructions
- Turn the knob to connect the power cord. The speed of the electric fan can be up to 4500 times/min.
- When the machine starts to run, place your fingernails as close tothe fan as possible.
- After the operation is completed, please turn the knob back to the original position.
Contact
- SERVICIO TECNICO OFICIAL GADNIC
- www.servitech.com.ar
- © 11 6260 1114 (sólo texto)
- serviciotecnico@servitech.com.ar
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>