Rollator 4 Caster Rebel Human Care Group Instruction Manual

: May 15, 2024
: HUMAN CARE

Table of Contents

Rollator 4 Caster Rebel Human Care Group
Product Usage Instructions
Maintenance, inspection and testing
Intended use
Exploded View
Spare Parts
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Rollator 4 Caster Rebel Human Care Group

Rollator-4-Caster-Rebel-Human-Care-Group-product

Specifications

Brand : Human Care
Product Name : Rollator
Model : Rebel
Language Options : English (ENG), Swedish (SV), French (FR)

Product Usage Instructions

Maintenance, Inspection, and Testing:

To ensure the proper functioning and safety of your rollator, follow these maintenance guidelines:

Cleaning : Follow local regulations for cleaning. Use mild liquid detergent or a damp cloth for regular cleaning. Avoid toxic cleaning materials. Do not wash bearings with a pressure washer.
Post Treatment : After industrial cleaning, ensure all parts are dried completely. Lubricate moving parts. For home cleaning, ensure no moisture residue remains to prevent rusting.
Finish : Touch-up paint (art nr: F2) is available for scratches. Check for corrosion at welding points and screws.
Periodic Inspections : An annual inspection by an authorized agent is recommended. Replace any damaged components.

Handle Grip Replacement:

Periodically check the handle grip for wear and replace as needed.

Braking System:

Ensure brakes function in both control and park positions. Cease usage if brakes do not operate correctly and have them repaired immediately by an authorized agent.

Height Adjustment, CE and MD-Marking, Reflectors, Folding Mechanism, Wheels:

Regularly check and ensure the proper functioning of these components. Any issues should be inspected by an authorized agent

FAQ

Q: How often should I have my rollator inspected?
- A : It is recommended to have an annual inspection by an authorized agent to ensure proper functioning.
Q: What should I do if I hear noise from the wheels?
- A : Contact an authorized agent to inspect the product if any unusual noise is heard from the wheels.

Maintenance, inspection and testing

To ensure that your walking aid is functioning properly and safely, an annual inspection should be done only by an authorized agent. The following maintenance should be done regularly:

Cleaning

In accordance with local regulations where required, cleaning may be done by industrial washing at 60 degrees for 10 minutes. Pressure washing must only be done in a controlled environment by professional cleaners. Do not wash the bearings with a pressure washer. Regular cleaning with a mild liquid detergent or damp cloth is recommended. DO NOT use any toxic cleaning materials on the product as it will damage it.

Wash only using an industrial washer

Note! Do NOT use thinner, petrol or other solvents.

Post-treatment

Should cleaning be performed in an industrial setting, ensure all connections, spaces and holes are dried completely before usage. Lubricate any moving parts. For home cleaning (wiping with a damp cloth), ensure the rollator is free of residue moisture to avoid rusting its components.

Finish

The rollator is painted and sealed for a superior finish, however, scratches can occur with impact. Scratches in the frame may result in corrosion. Touch- up paint (art nr: F2) can be ordered from Human Care HC AB.

Corrosive components

The rollator does contain components that may rust if left in a moisture setting. Periodically check all welding points and screws. It is recommended that an authorized agent perform this inspection. If corrosion is present, replace parts. If corrosion is extensive, replace the rollator.

Periodic inspections

At a minimum, it is recommended that an authorized agent perform an annual inspection of the rollator and its components to ensure it is functioning as intended. Do not use the rollator
if any components are damaged or inoperable. Have an authorized agent perform necessary repair and/or replacement.

Handle grip

Periodic replacement of the handle grip may be necessary with usage. Replace as required.

Braking system

The brakes should function in both the control and park position and the wires should be intact. Should these control functions not operate as intended, cease usage and immediately have the rollator repaired.

Height adjustment

Control function.

CE and MD-marking

Ensure that the CE and MD markings are present and legible.

Reflectors

Ensure that the reflectors are still there and visible.

Folding mechanism

Control function

Wheels

Ensure the wheels are not worn out and spin easily to ensure proper movement of the rollator. If any noise is heard, have an authorized agent inspect the product.

Front forks

Make sure that the ball bearings are firmly attached and that the forks swing easily. Test by swinging both wheels at a minimum of three times and up to ten times. There should be no more than two swings difference between the two wheels while they swing between 3 and 9 o’clock. Adjust the inertia by replacing and adjusting the fork screws M12x56. Check that the set screw above the front fork is fully screwed in.

Seat

Periodically check to ensure that the seat mechanism and screws are firmly in place. If any components are not secure, do not sit on the rollator and have it inspected for repair immediately. If used, ensure the seat pad is properly mounted in the seat place for maximum comfort.

Stability

The wheels should all rest firmly on the ground and that there should be no distortion of the frame.

Walking Test

Before using your rollator, take a small walk with it to ensure it is properly functioning.

Authorized Dealer/Service Agent

Last Service Date

Intended use

This rollator was designed to act as a support device while walking or as a resting seat while stationary and locked into position. It should never be used as a transport device. Never attempt to alter the rollator in any way.

Note!

Reconditioning must be done only by an authorized agent. If incorrectly performed by an unauthorized individual, it could result in an accident/injury.

To locate an authorized agent, contact your local office:

Europe : info.se@humancaregroup.com
Canada : info.ca@humancaregroup.com
United States : info.us@humancaregroup.com
Australia : info.au@humancaregroup.com
Netherlands : info.nl@humancaregroup.com

When exchanging parts on the rollator, use only Human Care-authorized parts to ensure continued CE validation.

If corrosion is more than a film of rust, discard and recycle the rollator according to local regulations. Never use this rollator in any way other than for its intended purpose.

It is strongly recommended that a therapist or doctor assess your needs prior to using this product. Inspect your rollator frequently prior to usage to ensure there is no damage or wear.

The user must not exceed this product’s weight capacity!

Rebel
- 140kg/309lb
Rebel Reinforced
- 250kg/551lb

Exploded View

Rollator-4-Caster-Rebel-Human-Care-Group-fig3

Spare Parts

No	Designation (Qty/Rollator)	UofM	Art. no	Additional Instructions
1	Wheel kit Rebel (4 required)	EA	89015	Axle bolt and nut must

always be
Complete wheel Wheel nut (2/kit)

Axle bolt

| replaced when changing wheels.
1| Wheel Rebel Reinforced (4 required)

Wheel

Wheel nut (2/kit) Axle bolt

| EA| 89086|
2| Axle bolt and nut Rebel (4 required)| EA| 89032|
Wheel nut

Axle bolt

2| Axle bolt and nut Rebel Reinforced (4 req’d)

Wheel nut Axle bolt

| EA| 89091|
3| Handle kit Rebel (2 required)

Handle tube Complete brake Ergonomic handle

| EA| 89055| Left or right side.

For Rebel High 57 and 62 use 92903

For Rebel High 67 and 72 use 92953

3| Handle kit Rebel Reinforced (2 required)

Handle tube Complete brake Ergonomic handle

| EA| 89033| Left or right side.

For Rebel High 57 and 62 use 92904

For Rebel High 67 and 72 use 92954

4| Ergonomic handle| EA| 20-024|
5| Wing nut complete (2 required)

Wing nut Screw Washer

| EA| 50937| Lubricate when needed.
6| Complete wire (2 required)

Wire Housing Wire

Wire lock

Wire end

| EA| 89050|
7| Brake kit (2 required) Inner brake housing Outer brake housing Pop nut

Wear washer Screw (M6x6) Washer Adjustment screw Spring

Screw (M6x16) Wheel nut

Axle bolt

| EA| 89095| For the Reinforced model, part 89091 must also be replaced when replacing the brake handle.
8| Wear washer| EA| 10-004| Turns when worn.
9| Seat kit (1 required)

Seat Gate lock

Folding loop handle Screw (M6x20 – 2/kit)

Gate lock screw

| EA| 89020|
---|---|---|---|---
10| Seat

Seat

Screw (M6x20 – 2/kit)

| EA| 89070|
11| Folding loop handle| EA| 10-009|
| Tube protection| EA| 50949|
12| Gate lock kit (1 required)

Gate lock Screw (4/kit)

Folding loop handle

| EA| 10-018|
13| Front fork kit Rebel (2 required)| EA| 89025|
Front fork Bearing (2/kit) Wheel nut Axle bolt

Cap Cover Screw (M12x56) Screw (M6x7) Washer

Locking Washer