SPBPQY

Wireless Earbuds Bluetooth Headset for 2nd Pods with Wireless Charging

Case

Specifications

• FEATURES: wireless charging
• BRAND: SPBPQY
• COLOR: White
• ASSEMBLED PRODUCT DIMENSIONS (L X W X H): 0.32 x 0.32 x 0.16 Feet
• SENSORS: Dual beamforming microphones, Dual optical sensors, Motion-detecting accelerometer, Speech-detecting accelerometer
• CHIP: H1 headphone chip
• HEIGHT: 1.59 inches (40.5 mm)
• WIDTH: 0.65 inch (16.5 mm)
• DEPTH: 0.71 inch (18.0 mm)
• WEIGHT: 0.14 ounce (4 grams)
• CHARGING CASE: Works with the Lightning connector
• CONNECTIVITY: Bluetooth 5.0

Introduction

Apple tested preproduction AirPods (2nd generation), Charging Case, and Wireless Charging Case units and software with iPhone Xs Max units and prerelease software in February 2019. The playlist included 358 different audio tracks from the iTunes Store (256-Kbps AAC encoding). The volume was set to 50%. The AirPods battery was fully discharged while playing audio until the first AirPod ceased playing. Battery life is affected by a variety of factors, including device settings, environment, and usage.

Apple tested preproduction AirPods (2nd generation), Charging Case, and Wireless Charging Case units and software with iPhone Xs Max units and prerelease software in February 2019. The volume was set to 50%. The initial AirPod was tested with a fully charged battery and a cellular phone call until the first AirPod ceased playing call audio. Battery life is affected by a variety of factors, including device settings, environment, and usage.

Apple tested preproduction AirPods (2nd generation), Charging Case, and Wireless Charging Case units and software with iPhone Xs Max units and prerelease software in February 2019. The playlist included 358 different audio tracks from the iTunes Store (256-Kbps AAC encoding). The volume was set to 50%. The AirPods battery was fully discharged while playing audio until the first AirPod ceased playing. After charging the exhausted AirPods to 100 percent, music playback was resumed until the first AirPod stopped. This cycle was continued until both the AirPods and the charging case were completely depleted. Battery life is affected by a variety of factors, including device settings, environment, and usage.

Apple tested preproduction AirPods (2nd generation), Charging Case, and Wireless Charging Case units and software with iPhone Xs Max units and prerelease software in February 2019. The volume was set to 50%. The initial AirPod was tested with a fully charged battery and a cellular phone call until the first AirPod ceased playing call audio. After charging the exhausted AirPods to 100 percent, the cellular phone call was restarted until the first AirPod ceased playing call audio. This cycle was continued until both the AirPods and the charging case were completely depleted. Battery life is affected by a variety of factors, including device settings, environment, and usage.

IN THE BOX

• AirPods
• Lightning to USB-A Cable
• Charging Case

HOW TO GET BOTH WIRELESS EARBUDS TO WORK SIMULTANEOUSLY

The two Bluetooth headsets must be paired at the same time; otherwise, only one will pair.

1. Push both buttons until a blue flashing light appears (don’t stop pressing when alternating blue/red lights appear).
2. Open Bluetooth on your phone and search for tws-k2, then select one of them to pair.

HOW TO PAIR

Remove both buds. In your Bluetooth scan menu, look for the device. Make contact with it. They should be connected to your phone and paired together.

Frequently Asked Questions

• Is it possible to use the earbuds separately or do they have to be used together?
  You can use them separately; the casing is the key. When you remove them from the case, they both turn on and connect to each other before searching for a device.

• Is it possible to use two earbuds at the same time?
  Android users must go to Bluetooth Settings and pair each Bluetooth headset or speaker individually. Once connected, go to the right-hand three-dot icon and select Advanced Settings. If you haven’t previously, turn on the ‘dual audio’ option. Users should be allowed to connect to two devices at the same time.

• Why am I unable to connect both wireless earbuds?
  Turn off your device’s Bluetooth option. Remove the earbuds from the casing and they will automatically turn on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: Try it again if it doesn’t work the first time.

• Why is it that only one of my earbuds is working?
  Examine the options. Depending on your audio settings, headphones may only play in one ear. Check your audio properties to make sure the mono option is disabled. Also, make sure that the voice levels on both earphones are equal.

• Why is one side of my Bluetooth earphone not working?
  To repair Bluetooth earbuds, you must first restart the headset. If it doesn’t work, you might try resetting Bluetooth and pairing. If it doesn’t work, check the audio settings on your phone or computer. Otherwise, we believe your sound is the source of the problem.

• Is it possible to only use one Bluetooth earbud?
  For mono music or phone calls, the right earbud can be used alone. Control the volume and track using your connected mobile device. Because the left earbud only connects to the right earbud and not to the mobile device, you can’t use it by itself. Only the right earbud is directly connected to the smartphone.

• Is it possible to utilize wireless earbuds separately?
  True wireless earbuds still use Bluetooth technology, but instead of being incorporated into a wire, the Bluetooth connection is built directly into each earpiece. Because the earbuds are distinct, you may use each one separately or join them together for a more immersive music experience.

• Can Bluetooth headphones be used with several devices?
  Bluetooth multipoint allows your headset to connect to two different sources at the same time. Bluetooth multipoint was first launched ten years ago, with the release of Bluetooth 4.0. It’s a function that allows a single Bluetooth headset to connect to at least two source devices at the same time, such as a laptop and a smartphone.

• What is the purpose of a Bluetooth splitter?
  Headphone splitters provide parallel circuits for connecting numerous headphones to a single audio jack. For example, suppose you have two children who both require comfort. You want to use baby headphones for this, but your gadget only has one audio jack, so you can only use one set.

• Is it possible to connect two wireless headphones to one device?
  By modifying device settings, employing an external Bluetooth signal emitter, and using audio mixing software, you can connect two Bluetooth headphones to any device. The processes vary depending on which device you’re using to link your headphones with.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>