HUMAN CARE Rebel RA Rebel Trolley Walker User Manual
- May 15, 2024
- HUMAN CARE
Table of Contents
HUMAN CARE Rebel RA Rebel Trolley Walker
Specifications
- Product Name: Rebel RA&TW
- Manufacturer: Human Care HC AB
- Recommended Cleaning: Machine washing at 60 degrees for 10 minutes
- Lubrication: Thin oil for connections and moving parts
- Paint Touch-Up: Use touch-up paint (art nr: F2) from Human Care HC AB
- Brakes: Check both brakes and parking brakes
- Reflectors: Ensure reflectors are visible
- CE and MD-marking: Verify markings are readable
Product Usage Instructions
Cleaning and Maintenance
- Machine wash the walker at 60 degrees for 10 minutes annually.
- Avoid washing bearings directly when using a pressure washer.
- Regularly clean with a mild cleanser, avoiding solvents like thinner or petrol.
Post Treatment
- After washing, blow dry all connections and drainage holes.
- Spray thin oil on connections and moving parts.
Paint Control
Use touch-up paint (art nr: F2) to prevent corrosion and improve scratches.
Handle and Brakes
- Ensure the handle is fixed and can be pushed down to the chassis.
- Check that both brakes and parking brakes are working correctly.
Wheels and Lubrication
- Verify wheels are not worn-out and spin easily without noise.
- Lubricate gate bushings and hinges as needed.
FAQ (Frequently Asked Questions)
-
How often should I review the walking-aid?
It is recommended to review the walking-aid once per year to ensure safe functionality for the user. -
What should I do if I notice extensive corrosion on the pipe frame?
If corrosion is extensive, the rollator should be replaced to maintain safety and functionality. -
How should I handle the post-treatment after cleaning the walker?
After cleaning, ensure all connections are dry and spray thin oil on them. Use lubrication on moving parts if degreaser is used.
ABOUT PRODUCT
To secure that the walking-aid will function safely for the user, once per year review of the walking-aid should be done. Therefore is the following interventions recommended.
Cleaning
When cleaning the walker it is recommended machine washing, 60 degrees for 10
minutes. When using a pressure washer, do not wash directly to the bearings.
In addition to machine washing, regular cleaning with a mild cleanser is
recommended. Note! Do NOT use thinner, petrol or other solvents.
Post treatment
After washing, all connections, tight spaces and drainage holes should be
blown dry and sprayed with thin oil. If degreaser is used, should the moving
parts be lubricated.
The Paint
Control damages to the paint. To prevent corrosion, improve scratches. Touch-
up paint (art nr: F2) can be ordered from Human Care HC AB.
Pipe frame
Control weldings and screw attaches. If the corrosion is extensive shall the
rollator be replaced.
Handle
Must be fixed. Make sure the handle pipes can be pushed down to the chassis.
Brakes
Control that both brakes and parkingbrakes are working. Wires should be intact
and stapped to the chassis.
Wing nut
Control function.
Reflectors
Make sure the reflectors are still there and visible.
CE and MD-marking
Make sure that the CE and MD marking are still there and readable.
Wheels
Make sure the wheels are not worn-out and are spinning easily without noice.
Lubrication
Gatebushings and hinges should be working without any noice. Lubricate when
needed.
Front forks
Make sure that attachments and bearings does not fit loosely and are spinning
easily. Check that the set screw screw above the front fork is fully screwed
in.
Folding mechanism
Should be intact and the locking should function.
Seat
Make sure that the seat is kept in place and the nuts are tightened.
Stability
Control that all wheels are steadily on the ground and that there are no
chassis distortion.
Test driving
Make a final control by test driving.
Note!
- Recondition must be done by a person how has good knowledge about how the job should be performed. An incorrect performed recondition could result an accident/incident. Don´t hesitate to contact your retailer if questions come up.
- When exchanging parts of the rollator, use only Human Care parts to ensure continued CE-validation.
- When disassembling of a wheel, the wheel nut and pin bolt must be replaced since they contain a self-locking that will be destroyed when disassembling.
- If the corrosion is more than a film of rust the rollator shall be discarded and return for recycling.
Intended use
The RA-rollator/trolley walker should only be used as support whilst walking. Do not alter the RA-rollator/trolley walker yourself.
WARRANTY CARD
Spareparts list
| No | Designation | Quantity | Art. no | Other information |
|---|---|---|---|---|
| Wheel kit | 4 | 89015 | Pin bolt and wheel nut must be | |
| 1 | Complete wheel | 4 | exchanged when disassemble | |
| 2 | Wheel nut | 4 | the wheel. | |
| 3 | Pin bolt | 4 | ||
| Pin bolt & Wheel nut | 4 | 89032 | _Pin bolt and wheel nut |
must be_
2| Wheel nut| 4| | exchanged when disassemble.
3| Pin bolt| 4| |
| Front fork kit| 2| 89025| From 200907
| Front fork| 2| | Pin bolt and wheel nut must be
| Bearing| 4| | exchanged when disassemble
2| Wheel nut| 2| | the fork.
3| Pin bolt| 2| |
| Cover cap| 2| |
| Screw M12x56| 2| |
| Screw M6x7| 2| |
| Washer| 2| |
| Locking washer| 2| |
| Front fork kit| 2| 89045| Notice! For the old model of
Rebel.
| Front fork| 2| | Pin bolt and wheel nut must be
2| Wheel nut| 2| | exchanged when disassemble
3| Pin bolt| 2| | the fork.
| Screw cover| 2| |
| Screw M12x45| 2| |
| Brake kit| 2| 89095| Pin bolt and wheel nut must be
4| Brake inner part| 2| | exchanged when disassembling
5| Brake outer part| 2| | the brake.
6| Pop nut| 2| |
7| Wear washer| 2| |
8| Screw M6x6| 2| |
9| Washer| 2| |
10| Adjustment screw| 2| |
11| Spring| 2| |
12| Screw M6x16| 2| |
2| Wheel nut| 2| |
3| Pin bolt| 2| |
7| Wear washer| 2| 10-004| Wear washer turns when worn.
13| Handle brake complete| 2| 10650|
14| Handle| 2| 00020|
| RA| | |
15| RA-Cushion| 2| 20-054
16| RA-Bracket compl right| 1| 100-002H
17| RA-Bracket compl left| 1| 100-002V
| TW| | |
---|---|---|---|---
18| Walking table cushion| 1| 20-053
19| Cushion screw| 4| 00818
20| Bracket compl right| 1| 100-001H
21| Bracket compl left| 1| 100-001V
22| Teleskopic tube| 2| 20-010K| Rebel 67 RA/TW Low
22| Teleskopic tube| 2| 20-010L| Rebel 67 RA/TW Normal
22| Teleskopic tube| 2| 20-011K| Rebel 72 RA/TW Low
22| Teleskopic tube| 2| 20-011L| Rebel 72 RA/TW Normal
| Wing nut complete| 2| 50937| Lubricate the wing nut when
needed.
23| Wing nut| 2| |
24| Screw| 2| |
25| Washer| 2| |
26| Wire housing| 2| 00011| Rebel 67/72 RA/TW Low
26| Wire housing| 2| 00012| Rebel 67/72 RA/TW Normal
26| Wire| 2| 00005| Rebel 67/72 RA/TW Low/Normal
| Wire lock| 2| 10-017|
| Wire end| 2| 00205|
| Seat kit| 1| 89020|
27| Seat| 1|
28| Gate lock| 1|
29| Fold loop| 1|
30| Screw M6x20| 2|
31| Screw to gate lock| 4|
| Seat complete| 1| 89070|
27| Seat| 1|
30| Screw M6x20| 2|
| Tube protection| 1| 50949|
29| Fold loop| 1| 10-009|
| Gate lock kit| 1| 10-018|
28| Gate lock| 1|
31| Screw to gate lock| 4|
29| Fold loop| 1|
32| Gate upper complete| 1| 20-047MB| Rebel RA/TW 67
32| Gate upper complete| 1| 20-047B| Rebel RA/TW 72
32| Gate upper complete -seat| 1| 20-037MB| Rebel RA/TW 67
32| Gate upper complete -seat| 1| 20-037B| Rebel RA/TW 72
| Reflex| 2| 00028|
| Touch-up paint| | F2|
ABOUT COMPANY
- Årstaängsvägen 21B, SE-117 43 Stockholm, Sweden
- Tel. +46(0)8 – 510 132 00
- www.humancaregroup.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>