SCHUBERTH SC2 Standard Electronics Motorama User Guide
- June 1, 2024
- SCHUBERTH
Table of Contents
- SCHUBERTH SC2 Standard Electronics Motorama
- Product Information
- Product Usage Instructions
- Frequently Asked Questions
- PRODUCT FEATURES
- PRODUCT DETAILS
- INSTALLING THE SC2 REMOTE CONTROL
- INSTALLING THE MICROPHONE
- REPLACING THE BATTERY
- ICON LEGEND
- CHECKING THE BATTERY LEVEL
- MESH INTERCOM™
- CHANNEL SETTING
- BLUETOOTH INTERCOM
- FM RADIO
- VOICE COMMAND
- CONFIGURATION MENU
- TROUBLESHOOTING
- QUICK REFERENCE
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SCHUBERTH SC2 Standard Electronics Motorama
Product Information
Specifications:
- Product Name: SC2
- Functions: Mesh Intercom, Bluetooth Intercom, Music, Device settings, Language settings
- Compatibility: Works with full Carbon helmets
- Communication Range: Up to 400 meters in open terrain without obstacles
Product Usage Instructions
Installing the SC2 Remote Control:
- Remove the cover for the SC2 Remote Control.
- Click to install the SC2.
Removing the SC2:
- Click to remove the SC2.
- Note: When unplugging connectors, wiggle and pull them for easier release.
Installing the Microphone:
- The microphone comes pre-installed on the S3. To reinstall, press firmly on the area marked with the orange circle.
Replacing the Battery:
- Remove the battery by following the steps provided.
- Insert a new CR 2016 battery as instructed.
Powering On & Off:
- To switch off the SC2, hold the Multi-function Button for 2 seconds until you hear a double beep.
- To power on the SC2 Remote Control, tap the (+) Button.
Checking the Battery Level:
When switching on, the LED flashes red to indicate the charge level of both SC2 and SC2 Remote Control.
Phone Pairing:
- Access the configuration menu and select Bluetooth.
- Select Phone Pairing and enter the PIN when prompted.
Siri and Google Assistant:
To activate Siri or Google Assistant, use voice commands or specific button sequences as indicated.
Music Controls:
Control music playback with specific button sequences provided in the User’s Guide.
Mesh Intercom:
- To enable Mesh Intercom, press the Mesh Intercom Button. Communication range may vary based on helmet material.
- Mesh Intercom can be turned on or off using specific button sequences.
Open Mesh:
When enabled, users can freely communicate with each other within the same Open Mesh channel.
Frequently Asked Questions
- Q: How do I update the firmware of my SC2?
- A: You can upgrade the firmware using the SCHUBERTH Device Manager downloaded from oem.sena.com/schuberth/.
- Q: What is the maximum communication range for Mesh Intercom?
- A: The maximum range is limited to 400 meters in open terrain without obstacles, especially on full Carbon helmets due to electromagnetic interference shielding properties.
App functions: Mesh Intercom, Bluetooth Intercom, Music, Device settings, Language settings
SCHUBERTH SC2 APP
SCHUBERTH DEVICE MANAGER
The SCHUBERTH Device Manager allows you to upgrade the firmware and configure its settings directly from your PC. Download the SCHUBERTH Device Manager from oem.sena.com/schuberth/.
PRODUCT FEATURES
User’s Guide
This product comes with a Quick Start Guide, which is a basic version of the User’s Guide. A FULL VERSION OF THE USER’S GUIDE CAN BE DOWNLOADED AT oem.sena.com/schuberth
PRODUCT DETAILS
SC2 Remote Control
INSTALLING THE SC2 REMOTE CONTROL
INSTALLING THE SC2
REMOVING THE SC2
Note: When you need to un-plug the connectors, please wiggle and pull them. It will help the connector connection be released more easily.
INSTALLING THE MICROPHONE
(THE MICROPHONE IS PRE-INSTALLED ON THE S3)
REPLACING THE BATTERY
ICON LEGEND
SC2
Powering On & Off
To switch off the SC2, hold the Multi-function Button for 2 seconds until you hear the double beep. The remote control switches to sleep mode when you switch off the SC2. To wake up the remote control after starting the SC2, tap (+) Button on the remote control
SC2 REMOTE CONTROL
Powering Off
Note: The SC2 and the SC2 Remote Control come paired together. They will automatically connect to each other when the SC2 and the SC2 Remote Control are powered on.
Volume Up & Down
CHECKING THE BATTERY LEVEL
When switching on, the LED flashes red to indicate the charge level .
PHONE PAIRING
MOBILE PHONE
SIRI AND GOOGLE ASSISTANT
Activate the Siri or Google Assistant installed on Your Smartphone
MUSIC CONTROLS
MESH INTERCOM™
When Mesh Intercom is enabled, the SC2 will automatically connect to nearby all other Mesh users and allow them to talk to each other by pressing the Mesh Intercom Button.
Note: If the SC2 communication system is installed on full Carbon helmets, the maximum range of communication is limited to 400 meters in open terrain without obstacles, due to the electromagnetic interference shielding properties of the carbon fiber.
Mesh Intercom On & Off
OPEN MESH™
When Mesh Intercom is enabled, the headset will be in Open Mesh (default: channel 1) initially. Users can freely communicate with each other in the same Open Mesh channel.
CHANNEL SETTING
(DEFAULT: CHANNEL 1)
If the Open Mesh communication experiences interference because other groups are also using channel 1 (default), change the channel. You can select from channels 1 to 9.
Enter into the Channel Setting
Note: To exit the Channel Setting, tap the (+) Button or (-) Button until you hear a voice prompt, “Exit”, and tap the Center Button.
GROUP MESH™
Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset. Up to 24 users can all be connected in each private group.
CREATING A GROUP MESH
Creating a Group Mesh requires two or more Open Mesh users.
- You (C) and your friend (D) enter into Mesh Grouping to create a Group Mesh
- The headsets complete Mesh Grouping and automatically switch from Open Mesh to Group Mesh.
JOINING AN EXISTING GROUP MESH
One of the members in an Existing Group Mesh can allow new members in Open Mesh to join the Existing Group Mesh.
- One of the current members (E) and a new member (you [C]) enter into Mesh Grouping to join the Existing Group Mesh.
- The headsets complete Mesh Grouping. The new members will hear a voice prompt as their headsets automatically switch from Open Mesh to Group Mesh.
RESET MESH
If a headset in an Open Mesh or Group Mesh resets the Mesh, it will automatically return to Open Mesh (default: channel 1).
ENABLE & DISABLE MIC (DEFAULT: ENABLE)
Users can enable/disable the microphone when communicating in a Mesh Intercom
BLUETOOTH INTERCOM
Up to three other people can be paired with the your headset (A) for Bluetooth intercom conversations.
Intercom Pairing
Note: If the SC2 communication system is installed on full Carbon helmets, the maximum range of communication is limited to 400 meters in open terrain without obstacles, due to the electromagnetic interference shielding properties of the carbon fiber.
Pairing with Intercom B
Note: Repeat the step above to pair with Intercom Friends C & D.
TWO-WAY INTERCOM
Start & End with Intercom Friend 1-3
FM RADIO
Note:
- You can preset FM stations with the SCHUBERTH SC2 App or the SCHUBERTH Device Manager.
- If the SC2 is installed on full Carbon helmets the electromagnetic interference shielding properties of the carbon fiber shell can influence the clarity of FM signals.
VOICE COMMAND
The Voice Command of the SC2 allows you to operate certain operations by simply using your voice
Note : For detailed information including a full list of voice commands, refer to the User’s Guide.
CONFIGURATION MENU
Accessing the Headset Configuration Menu
Navigating Between Menu Options
Execute Menu Options
TROUBLESHOOTING
Remote Control Pairing
If you are using the SC2 Remote Control other than the one included in the package, follow the procedure below to pair the SC2 and the SC2 Remote Control .
SC2 Fault Reset
Note: Fault Reset will not restore the headset to factory default settings.
QUICK REFERENCE
- Producer: Sena Technologies Co., Ltd. 19, Heolleung-ro 569-gil, Gangnam-gu Seoul 06376, Republic of Korea
- Importer in Europe: SCHUBERTH GmbH Stegelitzer Straße 12 D-39126 Magdeburg, Germany
- Importer in US: SCHUBERTH North America 9920 Pacific Heights Blvd., Suite 150 San Diego, CA 92121
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>