nedis MICW110BK Wireless Rechargeable Microphone User Guide
- June 1, 2024
- nedis
Table of Contents
Wireless rechargeable microphone
with USB-C conncetion
MICW110BK
Quick start guide
Wireless rechargeable microphone
For more information see the extended manual online:
ned.is/micw110bk
Intended use
This product is intended to wirelessly record audio to a connected device.
The product is intended for indoor use only.
Any modification of the product may have consequences for safety, warranty and
proper functioning.
This product is intended to be used in household and similar applications such
as kitchen areas.
The product is not intended for professional use.
This product can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or instruction concerning
use of the product in a safe way and understand the hazards involved. Children
shall not play with the product. Cleaning and user maintenance shall not be
done by children without supervision.
Main parts (image A)
- USB-C input
- Audio receiver
- Clip
- Windscreen
- USB-C power input
- Microphone indicator LED
- Microphone
- Power button
- USB-A – USB-C cable
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not open the product, there are no user serviceable parts inside.
- Do not let children play with the packaging material. Always keep the packaging material out of the reach of children.
- Do not drop the product and avoid bumping.
- Do not expose the product to water, rain, moisture, or high humidity.
- Always keep the power cable and the product away from usual walkways.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Only use the provided power cable.
- Do not leave the product on prolonged charge when not in use.
- Do not use aggressive chemical cleaning agents when cleaning the product.
Connecting the product (image B – C)
- Plug the audio receiver A2 into the USB-C port of your device.
- Press and hold the power button A8 for 2 seconds to switch on the product.
**** The microphone module and audio receiver pair automatically.
Using the product
| Power button | Mode | Microphone indicator LED |
|---|---|---|
| Press and hold for 2 seconds | On/off | Red and green |
| Short press | Normal mode | Green |
| Silent mode | Blinking green | |
| Low power | Blinking red | |
| Charging | Red |
Disposal
**** The product is designated for separate collection at an appropriate
collection point. Do not dispose of the product with household waste.
For more information, contact the retailer or the local authority responsible
for the waste management.
Declaration of Conformity
We, Nedis B.V. declare as manufacturer that the product MICW110BK from our
brand Nedis®, produced in China, has been tested according to all relevant CE
standards and regulations and that all tests have been passed successfully.
This includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/MICW110BK#support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>